X7CAM4K HDMI USB WIFI Microscope Camera SONY IMX678/IMX585

Key Benefits

• 4K resolution at 3840x2160 for detailed inspection of solder joints, surface defects and fine features
• Dual output: HDMI for real-time monitor display and WiFi for wireless transmission to remote devices
• Standard C-Mount interface ensures compatibility with most microscope bodies and optical systems
• Zero-latency HDMI output ideal for fixed inspection stations and production line monitoring
• WiFi streaming supports mobile inspection and remote collaboration without cabling
• High sensitivity sensor (1364mv) and low dark signal (0.1mv) improve image clarity in low light
• Supports exposure times from 0.019ms to 1000ms for flexible use in varying lighting conditions

Application Scenarios

• PCB inspection at a production line with real-time HDMI display for on-site operators
• Remote quality review of solder joints via WiFi streaming to a supervisor's tablet
• Laboratory documentation of surface defects with 4K resolution and zero-latency HDMI output
• Electronics assembly verification using wireless image transfer from a mobile device
• Field inspection where a technician uses WiFi to stream images to a central team

Who It Is For

• Electronics manufacturers performing inline PCB and SMD inspection
• Industrial quality control teams requiring real-time defect analysis
• Laboratory researchers documenting surface features and specimen details
• Remote inspection teams in manufacturing or field service
• Technical training environments where live imaging is shared with multiple viewers

Problems It Solves

• A camera with only one output limits the inspection setup to either fixed monitor or wireless only
• Low-resolution cameras fail to capture fine solder joints or micro-features in PCBs
• Lack of C-Mount compatibility forces users to buy a new microscope or use mismatched adapters
• Latency in wireless transmission disrupts real-time inspection and alignment tasks
• No dual output means no backup method if one connection fails during a critical inspection

Technical Features

• Dual output: HDMI for real-time display and WiFi for wireless streaming
• Standard C-Mount interface for compatibility with most microscope bodies
• Real-time HDMI output with no latency, suitable for production environments
• WiFi transmission supports remote viewing on computers and mobile devices
• Sony IMX678 or IMX585 sensor with 1/1.8" size and 2.0μm pixel pitch
• High sensitivity: 1364mv at 1/30s exposure, low dark signal: 0.1mv at 1/30s
• Supports exposure times from 0.019ms to 1000ms for flexible lighting control
• 72 frames per second at 3840x2160 resolution with 1x1 binning
• Progressive scanning mode for smooth image capture
• USB interface for power and data transfer, with HDMI and WiFi as secondary outputs

Specifications

Specifications are taken from the AMADA product data for this item. Confirm critical dimensions with us in writing before ordering.

Customization Options

• Choose between IMX678 or IMX585 sensor variants based on application needs
• Select camera model with or without WiFi module based on connectivity requirements
• Order with or without USB cable, depending on system integration
• Configure firmware settings for exposure, gain and output mode via software

Comparison With Other Options

Use Guide

• Connect the camera to a microscope using the standard C-Mount interface; ensure the lens is properly seated
• Use the HDMI output to connect directly to a monitor for real-time inspection without latency
• Enable WiFi on the camera and connect a computer or mobile device to stream images wirelessly
• Adjust exposure time between 0.019ms and 1000ms depending on lighting conditions and motion
• Use 1x1 binning for maximum resolution at 72 fps; switch to binning if lower frame rate is acceptable
• Power the camera via USB; ensure the host device supports sufficient power delivery