- Home
- Products
- Wall Saw Diamond Blades
- Wall Saw Blade
Wall Saw Blade
Wall saw blade for through-wall openings
A wall saw cut has to finish the opening in one pass, so the segment height and bond follow the saw power rather than a catalogue default. Item IDs CA500WS-CA900WS run U-slot segments.
What Wall Saw Blade Is For
The plant specification sheet describes this tool as for fast cutting concrete and brick wall with u-slot segment. That is exactly where it belongs, and where it stops.
The specification table lists 9 sizes, Item IDs CA500WS to CA1600GC.
Wall Saw Blade is the whole of the Wall Saw Diamond Blades category, so specification work happens inside the item rather than by picking between siblings.
How It Is Built
Bond selected per enquiry
We do not ship a single general-purpose bond. Laser welded or silver welded.
Item ID series
Ordering runs on the CA500WS to CA1600GC series, so repeat orders return the same specification.
Sizes beyond the standard list
Other sizes are available upon customer's request.
Export handling
Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.
Sizes and Item IDs
Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.
| Item ID | Diameter | Bore size | Segment | ||
|---|---|---|---|---|---|
| mm | inch | mm/inch | thickness (mm) | height (mm) | |
| CA500WS | 500 | 20" | 25.4/ 1" | 4.5 | 10 |
| CA600WS | 600 | 24" | 25.4/ 1" | 4.5 | 10 |
| CA700WS | 700 | 28" | 25.4/ 1" | 4.5 | 10 |
| CA750WS | 750 | 30" | 25.4/ 1" | 4.5 | 10 |
| CA800WS | 800 | 32" | 25.4/ 1" | 4.5 | 10 |
| CA900WS | 900 | 36" | 25.4/ 1" | 4.5 | 10 |
| CA1200GC | 1200 | 48" | 25.4/ 1" | 4.5 | 10 |
| CA1600GC | 1600 | 64" | 25.4/ 1" | 4.5 | 10 |
- Product family
- Construction and Demolition
- Category
- Wall Saw Diamond Blades
- Bond
- Laser welded or silver welded.
- Country of manufacture
- China (Shangqiu, Henan)
- Private label
- Laser marking on the steel core available for OEM orders
Who It Is For
- Wall sawing specialists
- Demolition contractors cutting openings
- Structural alteration crews
Every one of these buyers gets the same first question from us: what material, what machine, what size.
The Problem It Solves
A wall saw cut is a one-shot job: the blade has to finish the opening.
Wall Saw Blade is the answer to that in the wall saw diamond blades part of the range: wall saw blade for through-wall openings.
For fast cutting concrete and brick wall with u-slot segment.
Why This Version and Not Another
U-slot segments for deep continuous cuts
Applies across the wall saw diamond blades series, including this item.
Dia 500-1600 mm programme
Part of how this category is built.
Segment specification set for your saw power and wall type
Part of how this category is built.
Use Guide
Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.
Compared With the Rest of the Category
Wall Saw Diamond Blades holds 1 item in the programme. The difference between them is geometry and construction, not marketing.
- Arrow Segment Diamond Grinding Cup Wheel — arrow segments for fast concrete removal
- Continuous Rim Diamond Grinding Wheel with Slot — slotted rim balancing finish and cooling
- Continuous Rim Diamond Grinding Wheel — continuous rim for smoothing concrete surfaces
- Double Row Diamond Grinding Cup Wheel — double row wheel for long removal runs
- L Segment Diamond Grinding Cup Wheel — l segments for edge work on concrete floors
- Single Row Diamond Grinding Cup Wheel — single row wheel for controlled concrete grinding
Wall Saw Blade — Questions We Get Asked
What sizes does Wall Saw Blade come in
The standard programme lists 9 sizes on this page, Item IDs CA500WS to CA1600GC. Other sizes are available upon customer's request.
Which bond will you supply for my material
The bond is set per enquiry rather than per catalogue number. Laser welded or silver welded.
What do you need to quote Wall Saw Blade
The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.
What is the lead time and minimum order for Wall Saw Blade
Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)
Others in the Same Part of the Range
Arrow Segment Diamond Grinding Cup Wheel
Arrow segments for fast concrete removal
View specifications →
Continuous Rim Diamond Grinding Wheel with Slot
Slotted rim balancing finish and cooling
View specifications →
Continuous Rim Diamond Grinding Wheel
Continuous rim for smoothing concrete surfaces
View specifications →
Double Row Diamond Grinding Cup Wheel
Double row wheel for long removal runs
View specifications →
L Segment Diamond Grinding Cup Wheel
L segments for edge work on concrete floors
View specifications →
Single Row Diamond Grinding Cup Wheel
Single row wheel for controlled concrete grinding
View specifications →
Straight Turbo Diamond Grinding Wheel
Straight turbo profile for even concrete grinding
View specifications →
T Segment Diamond Grinding Cup Wheel
T segments for grinding into concrete corners
View specifications →Related Technical Guides
Get a quote for Wall Saw Blade
Send the material, machine and size. You will get a specification and a price, not a catalogue page.