- Home
- Products
- Brazed Cup Wheel
- Vacuum Brazed Diamond Cup Wheel
Vacuum Brazed Diamond Cup Wheel
Dry grinding cup wheel for stone and glass
Brazed diamond grinds stone and glass dry without glazing over in the first minute. Dia 105-230 mm on 20 and 22.23 mm bores, in coarse, medium and fine mesh.
What Vacuum Brazed Diamond Cup Wheel Is For
The plant specification sheet describes this tool as used for fast and long-life grinding stone, glass. That is exactly where it belongs, and where it stops.
Standard specification: Dia105-230mm , hole size: 20/22.23mm, mesh size: coarse, medium and fine.
Vacuum Brazed Diamond Cup Wheel is the whole of the Brazed Cup Wheel category, so specification work happens inside the item rather than by picking between siblings.
How It Is Built
Bond selected per enquiry
We do not ship a single general-purpose bond. Please inform the material you will grind, we will choose the best bonding for you.
Size and mesh programme
Dia105-230mm , hole size: 20/22.23mm, mesh size: coarse, medium and fine.
Sizes beyond the standard list
Other sizes are available upon customer's request.
Export handling
Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.
Sizes and Item IDs
Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.
No size table is published for this item. Specification is quoted per enquiry — send the material, machine and size you need. (TBC)
- Product family
- Vacuum Brazed Tools
- Category
- Brazed Cup Wheel
- Bond
- Please inform the material you will grind, we will choose the best bonding for you.
- Standard specification
- Dia105-230mm , hole size: 20/22.23mm, mesh size: coarse, medium and fine
- Country of manufacture
- China (Shangqiu, Henan)
- Private label
- Laser marking on the steel core available for OEM orders
Who It Is For
- Stone fabricators doing on-site correction
- Glass shops grinding edges dry
- Renovation crews
Every one of these buyers gets the same first question from us: what material, what machine, what size.
The Problem It Solves
Grinding a stone or glass edge dry normally glazes the tool over within minutes.
Vacuum Brazed Diamond Cup Wheel is the answer to that in the brazed cup wheel part of the range: dry grinding cup wheel for stone and glass.
Used for fast and long-life grinding stone, glass.
Why This Version and Not Another
Grinds stone and glass fast without water
Applies across the brazed cup wheel series, including this item.
Dia 105-230 mm on 20 and 22.23 mm bores
Part of how this category is built.
Coarse medium and fine mesh in the same body
Part of how this category is built.
Use Guide
Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote this product name and your machine on repeat orders.
Compared With the Rest of the Category
Brazed Cup Wheel holds 1 item in the programme. The difference between them is geometry and construction, not marketing.
- Vacuum Brazed Diamond Blade — one blade for stone concrete and brick cut dry
- Vacuum Brazed Diamond Core Bit — dry core bits from 5 to 83 mm
- Vacuum Brazed Diamond Router Bit — brazed router bit for corners and cut-outs
- Vacuum Brazed Diamond Wire Saw — brazed wire for low-noise stone cutting
- Vacuum Brazed Diamond Profile Wheel — brazed profile wheel for natural and artificial stone
Vacuum Brazed Diamond Cup Wheel — Questions We Get Asked
What sizes does Vacuum Brazed Diamond Cup Wheel come in
Standard specification is Dia105-230mm , hole size: 20/22.23mm, mesh size: coarse, medium and fine. Other sizes are available upon customer's request.
Which bond will you supply for my material
The bond is set per enquiry rather than per catalogue number. Please inform the material you will grind, we will choose the best bonding for you.
Does Vacuum Brazed Diamond Cup Wheel need water
It is built to run dry. Water still extends the life, so use it where the job allows.
What do you need to quote Vacuum Brazed Diamond Cup Wheel
The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.
What is the lead time and minimum order for Vacuum Brazed Diamond Cup Wheel
Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)
Others in the Same Part of the Range
Vacuum Brazed Diamond Blade
One blade for stone concrete and brick cut dry
View specifications →
Vacuum Brazed Diamond Core Bit
Dry core bits from 5 to 83 mm
View specifications →
Vacuum Brazed Diamond Router Bit
Brazed router bit for corners and cut-outs
View specifications →
Vacuum Brazed Diamond Wire Saw
Brazed wire for low-noise stone cutting
View specifications →
Vacuum Brazed Diamond Profile Wheel
Brazed profile wheel for natural and artificial stone
View specifications →Get a quote for Vacuum Brazed Diamond Cup Wheel
Send the material, machine and size. You will get a specification and a price, not a catalogue page.