Home
Products
Tuck Point & Crack Chaser
U-Slot Laser Welded Tuck Point

Tuck Point & Crack Chaser

U-Slot Laser Welded Tuck Point

Name: U-Slot Laser Welded Tuck Point
Brand: Bello Diamond Tools
SKU: CA105UC

U-slot tuck point for dusty joint cutting

The U-slot keeps the segment clearing in dry dusty joints where a plain rim packs up and stops. Item IDs CA105UC-CA230UC cover the common grinder sizes.

Request A Quote Talk To An Engineer

Construction and Demolition
CA105UC to CA230UC
7 sizes listed

U-Slot Laser Welded Tuck Point — U-slot tuck point for dusty joint cutting

Product Overview

What U-Slot Laser Welded Tuck Point Is For

The plant specification sheet describes this tool as for fast cutting concrete, asphalt, hard brick, masonry with special u-slot. That is exactly where it belongs, and where it stops.

The specification table lists 7 sizes, Item IDs CA105UC to CA230UC.

Inside Tuck Point & Crack Chaser there are 4 items to choose between. This one is the u-slot tuck point for dusty joint cutting option — the comparison further down this page sets it against the others.

Technical Features

How It Is Built

Bond selected per enquiry

We do not ship a single general-purpose bond. Laser welded.

Item ID series

Ordering runs on the CA105UC to CA230UC series, so repeat orders return the same specification.

Sizes beyond the standard list

Other sizes are available upon customer's request.

Export handling

Packed for export and shipped from Shangqiu, Henan. Give us your destination port with the enquiry.

Specifications

Sizes and Item IDs

Taken from the plant specification sheets. Where a value is not published we say so rather than fill it in.

U-Slot Laser Welded Tuck Point — Specification table
Item ID	Diameter	Bore size	Segment
mm	inch	mm	thickness (mm)	height (mm)
CA105UC	105	4"	22.23	6.4/9.5	10
CA125UC	125	5"	22.23	6.4/9.5	10
CA150UC	150	6"	22.23	6.4/9.5	10
CA180UC	180	7"	22.23	6.4/9.5	10
CA200UC	200	8"	22.23	6.4/9.5	10
CA230UC	230	9"	22.23	6.4/9.5	10

Product family: Construction and Demolition
Category: Tuck Point & Crack Chaser
Bond: Laser welded.
Country of manufacture: China (Shangqiu, Henan)
Private label: Laser marking on the steel core available for OEM orders

Who It Is For

Concrete repair contractors
Road and pavement maintenance crews
Restoration masons

Every one of these buyers gets the same first question from us: what material, what machine, what size.

The Problem It Solves

Chasing a crack with a standard blade wanders off the line and loads the segment sideways.

U-Slot Laser Welded Tuck Point is the answer to that in the tuck point & crack chaser part of the range: u-slot tuck point for dusty joint cutting.

For fast cutting concrete, asphalt, hard brick, masonry with special u-slot.

Key Benefits

Why This Version and Not Another

Four geometries: laser-welded tuck point, crack chaser, U-slot and V-shape wave

Applies across the tuck point & crack chaser series, including this item.

Laser-welded segments for side-loaded cutting

Part of how this category is built.

Dia 105-230 mm on standard grinder bores

Part of how this category is built.

Use Guide

Confirm the fit
Check diameter, bore and segment dimensions against the table above and against your machine.
Set the parameters
Start at the machine builder's figures for your material, then adjust feed until the cut runs quiet and the surface stays clean.
Keep it free-cutting
If the tool stops cutting and the face goes shiny, it has glazed. Dress it, then tell us — that means the bond should change.
Order by Item ID
Quote the Item ID on repeat orders so you get the same specification as last time.

Compared With the Rest of the Category

Tuck Point & Crack Chaser holds 4 items in the programme. The difference between them is geometry and construction, not marketing.

Laser Welded Crack Chaser — crack chaser for opening cracks before filling
Laser Welded Tuck Point — laser-welded tuck point for clean joint width
V-Shape Wave Crack Chaser — v-shape wave profile for soft abrasive material
Arrow Segment Diamond Grinding Cup Wheel — arrow segments for fast concrete removal
Continuous Rim Diamond Grinding Wheel with Slot — slotted rim balancing finish and cooling
Continuous Rim Diamond Grinding Wheel — continuous rim for smoothing concrete surfaces

See the whole tuck point & crack chaser category

Questions Buyers Ask

U-Slot Laser Welded Tuck Point — Questions We Get Asked

What sizes does U-Slot Laser Welded Tuck Point come in

The standard programme lists 7 sizes on this page, Item IDs CA105UC to CA230UC. Other sizes are available upon customer's request.

Which bond will you supply for my material

The bond is set per enquiry rather than per catalogue number. Laser welded.

What do you need to quote U-Slot Laser Welded Tuck Point

The material you process, the machine and its power, the size and bore you need, and the quantity. With those four we quote a specification rather than a guess.

What is the lead time and minimum order for U-Slot Laser Welded Tuck Point

Lead time and minimum order depend on whether the size is in the standard programme or needs a production batch. Ask the sales office for this item — we do not publish a single figure that would be wrong half the time. (TBC)