PVC Self-Adhesive Tape supplied by Avans Tech

PVC Tapes And Films

PVC Self-Adhesive Tape

Name: PVC Self-Adhesive Tape
Brand: Avans Tech

This self-adhesive range covers two rubber builds for cable joint work. The high-voltage waterproof SA series is 0.8 mm thick in 19 mm 23 mm and 50 mm widths rated 10 KV for terminals and joints. The EPR build SA-23 is 0.8 mm by 25 mm by 5 m rated 69 KV for primary insulation restoration on solid dielectric cables.

Request A Quote On WhatsApp Email An Inquiry

ISO 9001:2015 production Samples available Small orders accepted

Product Overview

This self-adhesive range covers two rubber builds for cable joint work. The high-voltage waterproof SA series is 0.8 mm thick in 19 mm 23 mm and 50 mm widths rated 10 KV for terminals and joints. The EPR build SA-23 is 0.8 mm by 25 mm by 5 m rated 69 KV for primary insulation restoration on solid dielectric cables.

Materials

High-voltage rubber compound
EPR ethylene propylene rubber polymer

Key Benefits

Self-amalgamating rubber fuses into one insulation layer that does not fall off
SA series rated 10 KV and EPR SA-23 rated 69 KV, covering distribution and higher voltage joints
Breakdown strength of at least 20 KV/mm on both builds
30 month shelf life, so stock held for outage seasons stays usable
Elongation at break of at least 800 percent on the EPR build for wrapping stress cones

Application Scenarios And Who It Is For

Application Scenarios

Insulation waterproofing and sealing for 10 KV and below cable terminals and joints
Main insulation restoration on 600 to 69000 V solid dielectric cables
Primary insulation restoration with stress cones on solid dielectric cables up to 35000 V
Sealing joints that operate at up to 90 degrees C

Who It Is For

Utility jointers working on distribution and HV cable
Industrial electrical maintenance teams rebuilding damaged joints
Cable accessory distributors stocking jointing consumables
EPC contractors assembling field jointing kits

Problems It Solves

Taped joints that unwind or track because the layers never fused
Kits that cover only one voltage class, forcing several part numbers on the van
Insulation rebuild work where heat-shrink cannot be used near live or confined plant
Consumables that expire before the next outage window

Technical Features

SA series: thickness 0.8 mm, tensile at least 1.3 Mpa, elongation at break at least 400 percent, breakdown strength at least 20 KV/mm, volume resistivity at least 1x10^14 at 20 degrees C, dielectric constant 5.0 or less, no loosening after 24 h self-adhesion test
EPR SA-23: thickness 0.8 mm, tensile at least 1.0 Mpa, elongation at break at least 800 percent, breakdown strength at least 20 KV/mm, dielectric loss tangent 0.05 or less
Operating temperature range 90 degrees C or below

Specifications

Values below are taken from our published product data. Our tables note that figures are general averages for reference and that actual data should be confirmed by testing within the applicable scope.

SA10	0.8 mm x 19 mm x 4.5 Y, outer diameter 82 mm, 10 KV
SA20	0.8 mm x 23 mm x 5 Y, outer diameter 85 mm, 10 KV
SA20S	0.8 mm x 50 mm x 5 m, outer diameter 85 mm, 10 KV
SA-23 EPR	0.8 mm x 25 mm x 5 m, outer diameter 85 mm, 69 KV
Breakdown Strength	at least 20 KV/mm
Volume Resistivity	at least 1x10^14 at 20 degrees C
Dielectric Constant	5.0 or less
Operating Temperature Range	90 degrees C or below
Shelf Life	30 months from production date

Quality Control

Breakdown strength and volume resistivity tested at 20 degrees C
24 hour self-adhesion check for loosening
Tensile and elongation tested longitudinally on both builds
Thickness held at 0.8 mm across all widths

Customization Options

Width and roll length combinations for your jointing kits
Kit packing together with the waterproof composite tape and PVC outer tape
Labelling to your own kit part numbers

Comparison With Other Products

Compared With	Why This Product
Heat-shrink joint kits	No flame or heat gun, which matters in confined substations and near flammable plant
Waterproof Insulating Composite Tape	The SA rubber builds are for insulation rebuild and stress cones, the composite tape carries the 35 KV sealing rating

Use Guide

Remove the release film and stretch the tape by 200 percent before wrapping
Wrap in a half-overlap pattern around the area needing insulation or waterproofing
On the EPR build keep folding and wrapping until the required thickness is reached; in critical areas stretch to the point of rupture, which does not change its physical or electrical characteristics
Add an outer protective layer of PVC adhesive tape for durability
Store in a cool dry place

Questions Buyers Ask

PVC Self-Adhesive Tape FAQ

Which build do I need for a 35 KV joint

The EPR build SA-23 is listed for primary insulation restoration with stress cones on solid dielectric cables up to 35000 V and is rated 69 KV pressure resistance.

How far should the tape be stretched

Stretch by about 200 percent before wrapping. In critical areas the EPR build can be stretched to the point of rupture without changing its physical or electrical characteristics.

What is the maximum operating temperature

The published operating range is 90 degrees C or below.

How long can it be stored

Shelf life is 30 months from the production date under room-temperature indoor storage.

Do I need an outer layer over it

Yes, an outer protective layer of PVC adhesive tape is recommended for mechanical durability.

Can you pack these into our own joint kits

Yes. Send your kit contents and part numbers on WhatsApp and we will quote kit packing.