RuLin Industrial Park, Jintan, Changzhou, Jiangsu Province, China 213200
Home / Products / PVC Tapes And Films / PVC Warning Tape

PVC Tapes And Films

PVC Warning Tape

PVC Warning Tape is a plasticized PVC film coated with a pressure-sensitive adhesive, supplied in 0.13 mm and 0.15 mm thicknesses at 45 mm width. It is used to mark walkways, hazard zones and pipelines in plants and warehouses where painted lines wear off and have to be repainted during production hours.

ISO 9001:2015 production Samples available Small orders accepted

Product Overview

PVC Warning Tape is a plasticized PVC film coated with a pressure-sensitive adhesive, supplied in 0.13 mm and 0.15 mm thicknesses at 45 mm width. It is used to mark walkways, hazard zones and pipelines in plants and warehouses where painted lines wear off and have to be repainted during production hours.

Materials

  • Plasticized PVC film
  • Pressure-sensitive adhesive

Key Benefits

  • Wear-resistant glossy surface keeps floor markings legible in aisles under forklift traffic
  • Oil resistance means markings survive machine shops and maintenance bays without lifting
  • Eight roll lengths from 10 m to 33 m let you match roll size to the marked run instead of scrapping part rolls
  • Applied by hand with no curing time so a line can be remarked between shifts
  • Plastic-core option PE1333 for buyers standardising on non-paper cores

Application Scenarios And Who It Is For

Application Scenarios

  • Walkway and corridor marking in factories, warehouses, hospitals and retail spaces
  • Hazard labelling on walls, stairs and pipeline runs
  • Paint line masking and high-visibility splicing
  • Carton sealing, surface protection and decorative marking

Who It Is For

  • Plant maintenance and EHS teams responsible for floor marking schemes
  • Warehouse operators setting out picking aisles and staging zones
  • Industrial distributors carrying safety and marking consumables
  • Contractors doing fit-outs for hospitals and retail spaces

Problems It Solves

  • Painted floor lines need downtime to dry; tape is walkable immediately
  • Low-grade tape tears when lifted and leaves adhesive that has to be scraped off
  • Marking in oily areas fails early and creates a repeated maintenance job
  • Mixed roll sizes across sites make reordering and stock control messy

Technical Features

  • Plasticized PVC film with high-performance pressure-sensitive adhesive
  • Tensile strength 20 N/cm at 0.13 mm and 21 N/cm at 0.15 mm
  • Elongation 150 percent at 0.13 mm and 170 percent at 0.15 mm
  • Peel strength 1.3 N/cm on both thicknesses
  • Dielectric strength 43 KV/mm
  • Temperature rating 80 degrees C

Specifications

Values below are taken from our published product data. Our tables note that figures are general averages for reference and that actual data should be confirmed by testing within the applicable scope.

Thickness0.13 mm and 0.15 mm
Width45 mm
Roll Lengths10 m 13 m 16 m 18 m 33 m
Model CodesG1304 G1306 G1308 G1502 G1504 G1506 G1533 G1333 PE1333
Outer Diameter94.5 mm to 115 mm by model
Tensile Strength20 N/cm at 0.13 mm 21 N/cm at 0.15 mm
Elongation150 percent at 0.13 mm 170 percent at 0.15 mm
Peel Strength1.3 N/cm
Adhesion0.30 kg/25 mm at 0.13 mm 0.36 kg/25 mm at 0.15 mm
Dielectric Strength43 KV/mm
Temperature Rating80 degrees C
SurfaceGlossy wear-resistant
Shelf Life12 months from production date

Quality Control

  • Thickness and width checked against the model code on every production run
  • Tensile and elongation tested to the published values
  • Adhesion and peel strength verified before packing
  • Published figures are general averages and actual data should be confirmed against test results on your own substrate

Customization Options

  • Roll length and core type on request including plastic core
  • Colour selection for marking schemes
  • Carton quantity and labelling for distributor stock

Comparison With Other Products

Compared WithWhy This Product
Painted floor markingNo drying time and no solvent smell so aisles reopen immediately
PVC Wrapping TapeWarning Tape is adhesive-backed for surfaces while wrapping tape is non-adhesive for harness colour coding

Use Guide

  • Clean the surface to remove grease dust and moisture before application
  • Apply with even tension and press down along the full run
  • Do not over-stretch the final section to avoid curling
  • Store at room temperature in a ventilated shaded indoor area

Questions Buyers Ask

PVC Warning Tape FAQ

What thicknesses and widths are available

0.13 mm and 0.15 mm, both at 45 mm width, in roll lengths of 10 m 13 m 16 m 18 m and 33 m.

Will the tape leave adhesive residue when removed

The adhesive is a pressure-sensitive type intended for clean removal, but residue depends on substrate, temperature and how long the tape has been in place, so test on your own surface first.

What is the shelf life

12 months from the production date when stored at room temperature indoors, ventilated and out of direct sunlight.

Can you supply a plastic core instead of paper

Yes. Model PE1333 is the plastic-core version of the 0.13 mm 45 mm 33 m roll.

What is the minimum order quantity

Small order quantities are available. Send the models and roll counts you need on WhatsApp and we will confirm the quantity and lead time.

Can I get a free sample before ordering

Yes. Tell us which models you want to evaluate and your shipping address and we will send samples for checking.

Ask About PVC Warning Tape

Send the model, quantity and destination port and we will reply with a quotation, packing detail and lead time.