Subgrade Reinforcement And Settlement
Confine the fill you already have, then prove the settlement is inside the design envelope layer by layer.
Stage By Stage
Every Step And The Problem It Removes
- 1
Ground Assessment
Soft foundation that will rut under traffic loading
Geocell confinement spreads load and reduces rutting over weak subgrade.
- 2
Material Choice
Hauling in graded fill at project cost
Cells are filled with local soil, gravel or concrete inside the confinement.
- 3
Panel Geometry
One cell size that does not suit every layer
Cell height and weld distance adjusted to the engineering case, in PP or PE.
- 4
Transport And Placing
Bulk reinforcement shipping to remote sites
Panels ship collapsed and stretch into the net on site with fast connection.
- 5
Settlement Instrumentation
Settlement known only at the surface
AT-88 magnet rings on 53 mm or 70 mm casing record settlement layer by layer.
- 6
Verification
Design earth pressure never confirmed in the built work
Earth pressure cells from 0.1 to 6.0 MPa placed at the interfaces that matter.
Products In This Solution
What Ships On The Order
Geocell
Geocell is a cell structure welded from thermoplastic sheets that is shipped collapsed and stretched open on site, then filled with...
View Specifications
Settlement Magnet Ring
The AT-88 series settlement magnet ring is the target component in a settlement measurement system. The housing is injection...
View Specifications
Piezometer Casing Pipes
GT-PC series PVC piezometer casing is supplied in OD 53 mm, 70 mm and 80 mm, in 2 m or 4 m lengths, with wall thickness deviation...
View Specifications
Vibrating Wire Load Cell
Two earth pressure load cell models are supplied. AT-LC-2020 is a vibrating wire load cell for the pressure stress between soil and...
View Specifications
Water Level Meter
The GT-WLM series water level meter is a dip meter for measuring water depth in boreholes and standpipes. Eight tape lengths cover...
View SpecificationsWhere It Applies
Industries Using This Approach
What You Get From One Supplier
- Parts that match by published specification rather than by assumption
- One contact for casing, consumables and instruments
- ISO 9001:2015 production with traceable casing quality
- Samples before commitment and small order quantities accepted
Questions Buyers Ask
Subgrade Reinforcement And Settlement Questions
Can you take responsibility for the whole item list
Yes. Casing, couplings, caps, protection boxes and the instruments that read the hole come from the same catalogue, so parts match by specification.
How is a large order scheduled
Two extrusion lines produce tens of thousands of metres of casing or pipe per day, and deliveries are scheduled against your programme.
Do you accept small trial orders
Yes. Small order quantities are available and free samples can be sent for evaluation.
What certification covers production
The quality management system is based upon the requirements of ISO 9001:2015.
How do we get a quotation
Send the item list, quantities and destination on WhatsApp or by email and we will reply with pricing, packing and lead time.
Plan Subgrade Reinforcement And Settlement With Us
Send the drawings, hole depths or item list and we will come back with a full quotation.