PVC Tapes And Films

Self-Adhesive Fireproof Wrapping Tape

Name: Self-Adhesive Fireproof Wrapping Tape
Brand: Avans Tech

Self-Adhesive Fireproof Wrapping Tape model FSD-99 is a 0.7 mm by 60 mm by 5 m self-adhesive tape that chars on flame contact to form a fire-resistant carbonized layer over cable sheaths. It is applied to cable runs in substations, metros, tunnels and coal mines without affecting current-carrying capacity.

Request A Quote On WhatsApp Email An Inquiry

ISO 9001:2015 production Samples available Small orders accepted

Product Overview

Self-Adhesive Fireproof Wrapping Tape model FSD-99 is a 0.7 mm by 60 mm by 5 m self-adhesive tape that chars on flame contact to form a fire-resistant carbonized layer over cable sheaths. It is applied to cable runs in substations, metros, tunnels and coal mines without affecting current-carrying capacity.

Materials

Self-adhesive fire-resistant polymer tape

Key Benefits

Forms a carbonized barrier on flame contact so fire does not travel along the cable run
Oxygen index of at least 45 percent and char height of 2.5 m or less on test
Self-adhesive, so no clamps, heat or primer are needed to secure the wrap
Does not affect the current-carrying capacity of the cable it protects
Non-toxic and odourless during application, which matters in tunnels and enclosed plant rooms

Application Scenarios And Who It Is For

Application Scenarios

Cable fireproofing and reinforcement of cable sheaths
Additional insulation for high fire-risk zones and vulnerable cable sections
Fire protection for high and low voltage power lines in substations metros and coal mines
Fireproofing in industrial facilities tunnels and urban infrastructure

Who It Is For

Electrical contractors working to fire-stopping specifications on infrastructure projects
Substation and metro maintenance teams retrofitting existing cable trays
Coal mine and tunnel operators with fire-sensitive cable routes
Panel builders and cable accessory distributors

Problems It Solves

A single cable fire spreading along a tray and taking out parallel circuits
Retrofitting fire protection where there is no room to pull new fire-rated cable
Coatings that need curing time and ventilation inside occupied tunnels
Wraps that raise conductor temperature and force a derate

Technical Features

Total thickness 0.7 mm
Longitudinal tensile strength at least 3.0 Mpa
Elongation at break at least 500 percent longitudinal
Low-temperature tensile at minus 15 degrees C plus or minus 2 degrees C at least 60 percent
Flame retardancy char height 2.5 m or less
Oxygen index at least 45 percent

Specifications

Values below are taken from our published product data. Our tables note that figures are general averages for reference and that actual data should be confirmed by testing within the applicable scope.

Model	FSD-99
Thickness	0.7 mm
Width	60 mm
Length	5 m
Tensile Strength Longitudinal	at least 3.0 Mpa
Elongation at Break	at least 500 percent
Low-Temperature Tensile	at least 60 percent at minus 15 degrees C
Char Height	2.5 m or less
Oxygen Index	at least 45 percent
Shelf Life	12 months from production date

Quality Control

Thickness verified against the 0.7 mm specification on each run
Tensile and elongation tested longitudinally
Flame behaviour checked against char height and oxygen index limits
Low-temperature tensile checked at minus 15 degrees C

Customization Options

Roll length and width on request
Carton quantity and export labelling
Combination shipments with insulating and waterproof tapes on the same order

Comparison With Other Products

Compared With	Why This Product
Fire-retardant paint coatings	No curing time, no solvent release and no spray equipment in occupied tunnels
PVC Flame Retardant Electrical Tape	This tape is built to char and block flame spread on sheaths rather than to insulate conductors

Use Guide

Clean the cable sheath before wrapping
Wrap in a half-overlapping manner with even tension
Do not over-stretch the final layer
Store at room temperature indoors, ventilated and shaded

Questions Buyers Ask

Self-Adhesive Fireproof Wrapping Tape FAQ

Does the tape reduce the current rating of the cable

The product is specified as not affecting cable current-carrying capacity. Confirm against your own derating rules for the installation.

What size is one roll

Model FSD-99 is 0.7 mm thick, 60 mm wide and 5 m long.

How does it behave in fire

It chars on flame contact to form a fire-resistant carbonized layer. Tested char height is 2.5 m or less with an oxygen index of at least 45 percent.

Can it be applied in cold conditions

Low-temperature tensile is specified at minus 15 degrees C plus or minus 2 degrees C at at least 60 percent. For colder installations tell us the site temperature before ordering.

How long can it be stored before use

12 months from the production date under room-temperature indoor storage.

Do you supply samples for testing

Yes. Send your project details on WhatsApp and we will send a sample roll for evaluation.