PVC Tapes And Films
Aluminum Protective Film
Aluminum Protective Film is a soft PVC film coated with a rubber-based sensitive adhesive, supplied in 0.12 mm and 0.20 mm and certified to ROHS. It is applied to aluminium and plastic-steel door and window profiles to keep surfaces clean through fabrication, transport and installation, then peels away without residue.
ISO 9001:2015 production Samples available Small orders accepted
Product Overview
Aluminum Protective Film is a soft PVC film coated with a rubber-based sensitive adhesive, supplied in 0.12 mm and 0.20 mm and certified to ROHS. It is applied to aluminium and plastic-steel door and window profiles to keep surfaces clean through fabrication, transport and installation, then peels away without residue.
Materials
- Soft PVC film
- Rubber-based sensitive adhesive
Certifications
- ROHS
Key Benefits
- Moderate adhesion holds through handling yet peels with no residual glue
- No edge lifting, so profiles arrive on site still covered
- ROHS certified on both 0.12 mm and 0.20 mm grades
- Two thicknesses let you match film cost to how rough the handling is
- Elongation of 150 percent lets the film follow profile contours
Application Scenarios And Who It Is For
Application Scenarios
- Surface protection for aluminium door and window profiles
- Protection of plastic-steel doors and windows through fabrication and shipping
- Keeping finished profiles clean on site until handover
Who It Is For
- Aluminium and plastic-steel window fabricators
- Profile extruders shipping finished lengths to fabricators
- Facade contractors storing profiles on site before installation
- Distributors supplying window fabrication consumables
Problems It Solves
- Scratches and site dirt on finished profiles that force rework or replacement
- Films that leave adhesive behind and turn into a cleaning job at handover
- Film that lifts at the edges during transport and stops protecting anything
- Protection material that fails a ROHS requirement in the customer specification
Technical Features
- Soft PVC film with rubber-based sensitive adhesive
- Available in 0.12 mm and 0.20 mm total thickness
- Elongation 150 percent on both grades
- Adhesion 0.28 kg/25 mm at 0.12 mm and 0.32 kg/25 mm at 0.20 mm
- Tensile value 4.0 kg/25 mm on both grades
- ROHS certified
Specifications
Values below are taken from our published product data. Our tables note that figures are general averages for reference and that actual data should be confirmed by testing within the applicable scope.
| Thickness | 0.12 mm and 0.20 mm |
|---|---|
| Elongation | 150 percent |
| Adhesion | 0.28 kg/25 mm at 0.12 mm and 0.32 kg/25 mm at 0.20 mm |
| Tensile | 4.0 kg/25 mm |
| Certification | ROHS certified |
| Shelf Life | 12 months from production date |
Quality Control
- Adhesion checked against the published kg/25 mm value for each grade
- Thickness verified at 0.12 mm and 0.20 mm
- Peel behaviour checked for residue and edge lifting
- ROHS status maintained for both grades
Customization Options
- Width and roll length cut to your profile sizes
- Printed film for brand or batch identification on request
- Carton quantities to suit fabricator stock levels
Comparison With Other Products
| Compared With | Why This Product |
|---|---|
| PVC Wrapping Tape | Protective film covers a full profile face while wrapping tape is a narrow band for harness work |
| Higher-tack protective films | Moderate adhesion is chosen so the film peels clean from a finished anodised or coated surface |
Use Guide
- Clean the surface to remove grease dust and moisture before applying
- Apply with even tension and avoid trapping air along the edges
- Do not over-stretch at the end of a run to prevent curling
- Remove within the recommended storage life and check on a test piece if profiles have been stored outdoors
Questions Buyers Ask
Aluminum Protective Film FAQ
Which thickness should I choose
0.12 mm suits normal fabrication and shipping. 0.20 mm gives more mechanical protection where profiles get rougher handling on site.
Will the film leave glue on anodised profiles
The film is specified as moderate adhesion with no residual glue and no edge lifting. Test on your own finish before running a full batch.
Is it ROHS compliant
Yes. Both the 0.12 mm and 0.20 mm grades are listed as ROHS certified.
What roll widths do you supply
Width and length are cut to your profile sizes. Send your profile dimensions on WhatsApp for a quotation.
How long can the film stay on the profile
Shelf life is 12 months from production date under indoor storage. For long outdoor exposure send us the conditions so we can advise.
Can I get a sample roll
Yes. Tell us the thickness and width you need and we will send samples for checking.
Related
Related Products And Pages
PVC Warning Tape
PVC Warning Tape is a plasticized PVC film coated with a pressure-sensitive adhesive, supplied in 0.13 mm and 0.15 mm thicknesses...
View Specifications
Self-Adhesive Fireproof Wrapping Tape
Self-Adhesive Fireproof Wrapping Tape model FSD-99 is a 0.7 mm by 60 mm by 5 m self-adhesive tape that chars on flame contact to...
View Specifications
Waterproof Insulating Composite Tape
Waterproof Insulating Composite Tape model FSD-77 is a 1.65 mm by 50 mm by 3 m tape rated for 35 KV insulation protection. It...
View Specifications
PVC Wrapping Tape
PVC Wrapping Tape is supplied in two builds. The non-adhesive phase colour tape 1822 is 0.18 mm by 22 mm by 15 m in lead-free...
View SpecificationsAsk About Aluminum Protective Film
Send the model, quantity and destination port and we will reply with a quotation, packing detail and lead time.