Cable Jointing And Protection
A joint kit is only as good as its weakest layer. This is how the tape range is put together by voltage, sealing and fire duty.
Stage By Stage
Every Step And The Problem It Removes
- 1
Assessing The Duty
Voltage class, water exposure and fire risk each pull toward a different tape
Select by published rating: 10 KV SA series, 35 KV composite tape, 69 KV EPR build.
- 2
Insulation Rebuild
Layers that never fuse and later track
Self-amalgamating rubber stretched 200 percent wraps into one insulation body.
- 3
Waterproofing
Joints that fail months after commissioning through moisture
Composite tape rated 35 KV with breakdown strength of at least 20 KV/mm, from minus 40 to 90 degrees C.
- 4
Fire Protection
Fire travelling along a cable tray
FSD-99 fireproof wrap chars on flame contact, oxygen index at least 45 percent.
- 5
Mechanical Protection
Rubber layers damaged during backfill or pulling
PVC outer tape selected for flame retardancy or cold resistance as the site requires.
- 6
Kit Packing
Loose consumables missing from the van at the joint
Kit packing to your own part numbers and carton quantities.
Products In This Solution
What Ships On The Order
PVC Self-Adhesive Tape
This self-adhesive range covers two rubber builds for cable joint work. The high-voltage waterproof SA series is 0.8 mm thick in 19...
View Specifications
Waterproof Insulating Composite Tape
Waterproof Insulating Composite Tape model FSD-77 is a 1.65 mm by 50 mm by 3 m tape rated for 35 KV insulation protection. It...
View Specifications
Self-Adhesive Fireproof Wrapping Tape
Self-Adhesive Fireproof Wrapping Tape model FSD-99 is a 0.7 mm by 60 mm by 5 m self-adhesive tape that chars on flame contact to...
View Specifications
PVC Flame Retardant Electrical Tape
PVC Flame Retardant Electrical Tape is a matte-surface flame-retardant film supplied at 0.13 mm and 0.15 mm in 17 mm 18 mm and 23...
View Specifications
PVC Cold-Resistant Electrical Tape
PVC Cold-Resistant Electrical Tape is built for low-temperature work, supplied as a matte-surface build at 0.15 mm and a super...
View SpecificationsWhere It Applies
Industries Using This Approach
What You Get From One Supplier
- Parts that match by published specification rather than by assumption
- One contact for casing, consumables and instruments
- ISO 9001:2015 production with traceable casing quality
- Samples before commitment and small order quantities accepted
Questions Buyers Ask
Cable Jointing And Protection Questions
Can you take responsibility for the whole item list
Yes. Casing, couplings, caps, protection boxes and the instruments that read the hole come from the same catalogue, so parts match by specification.
How is a large order scheduled
Two extrusion lines produce tens of thousands of metres of casing or pipe per day, and deliveries are scheduled against your programme.
Do you accept small trial orders
Yes. Small order quantities are available and free samples can be sent for evaluation.
What certification covers production
The quality management system is based upon the requirements of ISO 9001:2015.
How do we get a quotation
Send the item list, quantities and destination on WhatsApp or by email and we will reply with pricing, packing and lead time.
Plan Cable Jointing And Protection With Us
Send the drawings, hole depths or item list and we will come back with a full quotation.