RuLin Industrial Park, Jintan, Changzhou, Jiangsu Province, China 213200
Waterproofing A Cable Joint That Has To Last
Home / Knowledge Centre / Waterproofing A Cable Joint That Has To Last

Installation Guide

Waterproofing A Cable Joint That Has To Last

Surface Preparation Decides The Outcome

Clean and abrade the area before application. Most joint failures we are asked about start with contamination under the first layer.

Waterproof Insulating Composite Tape

Stretch Is Part Of The Specification

The composite tape is stretched 150 percent after the release paper is removed. The self-amalgamating rubber builds are stretched about 200 percent. Under-stretching leaves the layers unfused.

PVC Self-Adhesive Tape

Half Overlap Every Time

Wrapping in a half-overlapping pattern gives two layers everywhere, which is what the published ratings assume.

Waterproof Insulating Composite Tape

Add A Mechanical Outer Layer

An outer layer of PVC adhesive tape protects the rubber during backfill and handling.

PVC Flame Retardant Electrical Tape

Match The Rating To The Duty

The composite tape carries a 35 KV insulation protection rating, the SA series 10 KV and the EPR build 69 KV pressure resistance.

PVC Self-Adhesive Tape

Waterproofing A Cable Joint That Has To Last
Product photography from our own production, not stock imagery.

Questions Buyers Ask

Questions About This Guide

Are these figures guaranteed values

Our specification tables note that published data are general averages for reference and that actual product data should be based on your own test results within the applicable scope.

Can you supply everything mentioned in this article

Yes, every product linked here is in our own catalogue and can be quoted on one order.

Can we get samples to check before ordering

Yes. Free samples are available. Tell us the items and your shipping details on WhatsApp.

Who should we talk to about a specific project

Send the project detail to [email protected] or on WhatsApp and it goes straight to the technical team.

Still Deciding Which One To Order

Send us the hole depth, voltage class or loading case and we will point at the right model from the same data.