Inclinometer Casings
Grooved casing strings in ABS PVC and aluminium, extruded in house to a single groove standard so one probe fits every hole on site.
7 Products In This Category
Every Inclinometer Casings Item We Make
Settlement Magnet Ring
The AT-88 series settlement magnet ring is the target component in a settlement measurement system. The housing is injection...
View Specifications
Optional Parts For Inclinometer Casings
Top and bottom caps and outer protection boxes for inclinometer casings. These are the parts that keep a monitoring hole usable...
View Specifications
Piezometer Casing Pipes
GT-PC series PVC piezometer casing is supplied in OD 53 mm, 70 mm and 80 mm, in 2 m or 4 m lengths, with wall thickness deviation...
View Specifications
Standard Aluminum Inclinometer Casing
GT-AL-00 is the standard OD 70 mm aluminium inclinometer casing, built to the same groove and straightness specification as our ABS...
View SpecificationsStandard PVC Inclinometer Casing
GT-PVC-00 is the standard OD 70 mm PVC inclinometer casing, dimensionally matched to our ABS casing so the same probes and...
View Specifications
Flushed ABS Inclinometer Casing
GT-ABS-01 is the flushed type ABS inclinometer casing at OD 70 mm, supplied in 3 m lengths with a slim 73 mm coupling at 3 mm wall...
View Specifications
Standard ABS Inclinometer Casing
GT-ABS-00 is the standard OD 70 mm ABS inclinometer casing with four internal guide grooves for traversing probes and in place...
View SpecificationsProblems This Category Solves
What Buyers Come To Us With
- Casing spiral that corrupts the survey direction over depth
- Couplings that let grout into the casing and jam the probe
- Project quantities arriving in batches and holding up drilling
- Groove sizes that do not match the probe already owned
Who It Is For
Who Buys This Range
- Geotechnical monitoring contractors
- Drilling contractors installing instrumentation
- Consultants writing casing specifications
- Instrumentation distributors
Core Advantages
What The Specification Guarantees
- One groove standard across ABS PVC and aluminium
- OD 70 plus minus 1.0 mm with wall 5 plus minus 0.5 mm
- Bending 1.0 per mille or less and torsion 0.2 degrees per metre or less
- Intensity strength at least 1200 N/100m
- Heat deflection temperature at least 97 degrees C
- Two extrusion lines producing tens of thousands of metres per day
Application Scenarios
- Slope and landslide monitoring boreholes
- Deep excavation and diaphragm wall monitoring
- Dam and embankment deformation monitoring
- Piezometer and settlement installations
Industries
Related Reading
Questions Buyers Ask
Inclinometer Casings Questions
What tolerance is held on the casing
OD 70 plus minus 1.0 mm, wall thickness 5 plus minus 0.5 mm, guide groove width 5 plus minus 0.5 mm and groove depth 2 plus minus 0.2 mm across ABS, PVC and aluminium.
Which materials can you supply
ABS in standard and flushed type, PVC and aluminium, all at OD 70 mm. OD 53, 80 and 85 mm are also available.
What lengths do the casings come in
3 m or 2 m on the standard casings and 3 m on the flushed ABS casing.
Do you supply couplings caps and protection boxes
Yes. Couplings come with the casing, and top and bottom caps and outer protection boxes are listed as optional parts.
How quickly can a large casing order be produced
Two extrusion lines can produce tens of thousands of metres of casing or pipe each day, so quantities are scheduled against your drilling programme.
Is production quality certified
The company is approved to ISO 9001:2015, which makes casing product quality traceable and qualified.
Get A Quotation For Inclinometer Casings
Send the models and quantities you need. Free samples are available and small order quantities are accepted.