PVC Tapes And Films
PVC Flame Retardant Electrical Tape
PVC Flame Retardant Electrical Tape is a matte-surface flame-retardant film supplied at 0.13 mm and 0.15 mm in 17 mm 18 mm and 23 mm widths. It is difficult to ignite and self-extinguishing, and is used for cable joint insulation up to 80 degrees C and 600 V. A separate new-energy vehicle build RENDER 1035 is offered at 0.10 mm with an 85 degrees C rating and ROHS compliance.
ISO 9001:2015 production Samples available Small orders accepted
Product Overview
PVC Flame Retardant Electrical Tape is a matte-surface flame-retardant film supplied at 0.13 mm and 0.15 mm in 17 mm 18 mm and 23 mm widths. It is difficult to ignite and self-extinguishing, and is used for cable joint insulation up to 80 degrees C and 600 V. A separate new-energy vehicle build RENDER 1035 is offered at 0.10 mm with an 85 degrees C rating and ROHS compliance.
Materials
- Thin PVC flame-retardant film
- PVC film with premium plasticizer on the new energy build
- High-performance pressure-sensitive adhesive
Certifications
- ROHS 2002/95/EC six-item standard on the new energy vehicle build
Key Benefits
- Self-extinguishing film for insulation work in fire-prone plant areas
- Dielectric strength of at least 40 KV/mm and breakdown voltage of at least 5000 V on both thicknesses
- Peel strength 1.8 N/cm holds the wrap in place through vibration
- New-energy vehicle build rated 85 degrees C with a 35 m roll for line use
- 24 month shelf life on all builds
Application Scenarios And Who It Is For
Application Scenarios
- Insulation of wire or cable connections at 80 degrees C or below and 600 V or below
- Phase colour identification and protective sheathing
- Wire bundling in fire-prone environments
- Harness winding and bundling on new energy vehicles
Who It Is For
- Electrical contractors working to flame-retardant specifications
- New energy vehicle harness manufacturers
- Panel builders and switchgear assemblers
- Industrial distributors stocking electrical consumables
Problems It Solves
- Standard tape feeding a fire along a cable route
- Wraps that peel back on vibrating assemblies
- Restricted-substance and temperature requirements on EV harness programmes
- Managing several suppliers for flame-retardant and standard tape
Technical Features
- 0.13 mm build: tensile 20 N/cm, elongation 170 percent, peel 1.8 N/cm, adhesion 0.38 kg/25 mm
- 0.15 mm build: tensile 22 N/cm, elongation 180 percent, peel 1.8 N/cm, adhesion 0.40 kg/25 mm
- Dielectric strength at least 40 KV/mm and breakdown voltage at least 5000 V
- RENDER 1035 new energy build: 0.10 mm, tensile 14 N/cm, elongation 130 percent, peel 1.4 N/cm, 85 degrees C
- Matte surface with glossy lettering
Specifications
Values below are taken from our published product data. Our tables note that figures are general averages for reference and that actual data should be confirmed by testing within the applicable scope.
| PFRET 1315 | 0.13 mm x 17 mm x 15 m, outer diameter 68 mm |
|---|---|
| PFRET 7200 | 0.15 mm x 18 mm x 12 m, outer diameter 70 mm |
| PFRET 7223 | 0.15 mm x 23 mm x 12 m, outer diameter 70 mm |
| RENDER 1035 | 0.10 mm x 19 mm x 35 m, outer diameter 80 mm |
| Tensile Strength | 20 N/cm at 0.13 mm and 22 N/cm at 0.15 mm |
| Elongation | 170 percent at 0.13 mm and 180 percent at 0.15 mm |
| Peel Strength | 1.8 N/cm |
| Adhesion | 0.38 kg/25 mm at 0.13 mm and 0.40 kg/25 mm at 0.15 mm |
| Dielectric Strength | at least 40 KV/mm |
| Breakdown Voltage | at least 5000 V |
| Use Rating | 80 degrees C or below and 600 V or below |
| Compliance | ROHS 2002/95/EC six-item standard on the new energy build |
| Shelf Life | 24 months from production date |
Quality Control
- Flame behaviour checked for ignition resistance and self-extinguishing
- Dielectric strength and breakdown voltage tested on each thickness
- Peel strength and adhesion verified per build
- Published data are general averages; confirm by testing within the applicable scope
Customization Options
- Model and roll length selection from the published list
- Colour options for phase identification
- Bulk packing for harness production lines
Comparison With Other Products
| Compared With | Why This Product |
|---|---|
| PVC Wiring Tape | The flame-retardant build is thicker and stronger where fire performance matters more than bundle diameter |
| Self-Adhesive Fireproof Wrapping Tape | This tape insulates conductors, while the fireproof wrap chars to block flame spread along a cable sheath |
Use Guide
- Clean the surface to remove grease dust and moisture before wrapping
- Wrap semi-overlapping with sufficient tension for a uniform layer
- Do not over-stretch the last layer to avoid curling
- Keep within the stated voltage and temperature scope
Questions Buyers Ask
PVC Flame Retardant Electrical Tape FAQ
What voltage and temperature is this tape rated for
Insulation of wire or cable connections at 600 V or below and 80 degrees C or below. The new energy vehicle build is rated 85 degrees C.
How flame retardant is it
The film is specified as difficult to ignite and self-extinguishing. Ask us for the test data if your specification requires a named standard.
Which models come in 23 mm width
PFRET 7223 is 0.15 mm x 23 mm x 12 m.
Do you have a ROHS compliant version
Yes. The new energy automobile build is stated as compliant with the ROHS 2002/95/EC six-item standard.
What roll length suits a production line
RENDER 1035 is a 35 m roll, which reduces roll changes compared with the 12 m and 15 m models.
Are samples available before a bulk order
Yes. Tell us the model codes and we will send free samples for evaluation.
Related
Related Products And Pages
PVC Warning Tape
PVC Warning Tape is a plasticized PVC film coated with a pressure-sensitive adhesive, supplied in 0.13 mm and 0.15 mm thicknesses...
View Specifications
Self-Adhesive Fireproof Wrapping Tape
Self-Adhesive Fireproof Wrapping Tape model FSD-99 is a 0.7 mm by 60 mm by 5 m self-adhesive tape that chars on flame contact to...
View Specifications
Waterproof Insulating Composite Tape
Waterproof Insulating Composite Tape model FSD-77 is a 1.65 mm by 50 mm by 3 m tape rated for 35 KV insulation protection. It...
View Specifications
Aluminum Protective Film
Aluminum Protective Film is a soft PVC film coated with a rubber-based sensitive adhesive, supplied in 0.12 mm and 0.20 mm and...
View SpecificationsRelated Industries
Related Solutions
Related Articles
Ask About PVC Flame Retardant Electrical Tape
Send the model, quantity and destination port and we will reply with a quotation, packing detail and lead time.