Sanitary Stainless Steel Clamped Equal Tee
The sanitary stainless steel clamped equal tee is engineered for superior performance in hygienic fluid systems.
Why Engineers Specify This Item
- Precision-machined to comply with AS, BS, DIN, and SMS standards, this equal tee guarantees leak-free performance and optimal flow distribution.
- Constructed from premium 304 or 316L stainless steel, it ensures excellent corrosion resistance and durability, meeting FDA, 3A, and CE certification standards.
- Its tri-clamp connection design allows for quick installation and disassembly, minimizing downtime during maintenance.
- Ideal for pharmaceutical and food processing industries, it maintains strict sanitary conditions while supporting high-pressure applications.
- The polished surface (Ra≤0.8μm) prevents bacterial buildup and simplifies cleaning for long-term reliability.
What It Prevents
- Branch stubs long enough to hold stagnant product that CIP never reaches
- Hand-cut branches with weld beads that snag fibre and biofilm
- Instrument connections improvised from reducers and adapters
Technical Data
Figures below are the catalogue range for this item. Exact dimensions are confirmed in writing against the standard you work to before production.
| Material | SS 304 or SS 316L for option |
|---|---|
| Media | Water, oil, milk, beverage, sanitary fluid etc |
| Connection | Butt-Welded, Thread, Clamped, Flange |
| Size Range | 1"-6" |
| Pressure | 0-20Bar |
| Working Temperature | -20 C to 120 C |
| Standard | AS, BS, 3A, DIN, SMS, ISO |
| Gasket | EPDM/SILICON/PTFE/VITON |
| Certification | 3A, FDA, CE |
Materials
- SS 304
- SS 316L
Manufacturing Process
- Machining
- Forming and welding
- Interior polishing
- Assembly
- Quality inspection
Quality Control
- Dimensional check against the standard stated on the order
- Surface finish verified against the specified Ra figure
- Visual and leak inspection before packing
- Material certificates to EN 10204 3.1 available on request
Where It Is Installed
- Sampling point on a product transfer line
- CIP supply branch into a tank spray ball
- Merging two feeds into one filler header
- Thermowell or pressure sensor take-off
Who Buys It
- Fabricators building hygienic pipe runs to a drawing
- Plants adding a sampling or instrument point to an existing line
- Skid builders who need short dead legs by design
What It Is Built To
- 3A
- FDA
- CE
What We Can Change
- Non-standard sizes made to your dimensions
- Special connection types and mixed-standard ends
- Customised surface finish down to Ra 0.4 um
- Seal material selected for your media and CIP cycle
How It Compares
Compared with Sanitary Elbows and Bends
Specify the Sanitary Stainless Steel Clamped Equal Tee where the duty is what this category is built for: branch fittings in clamped, welded and union versions, including short outlet, Y-type, U-type and instrument tees. Move to sanitary elbows and bends instead where the requirement is 45, 90 and 180 degree bends in clamped, welded and threaded versions, including long radius bends for pumped product.
Compared with Sanitary Reducers
Specify the Sanitary Stainless Steel Clamped Equal Tee where the duty is what this category is built for: branch fittings in clamped, welded and union versions, including short outlet, Y-type, U-type and instrument tees. Move to sanitary reducers instead where the requirement is concentric and eccentric reducers that change line size without creating a pocket the line cannot drain.
Compared with A general industrial equivalent
An industrial-grade part of the same nominal size is usually cheaper and carries no declared hygienic surface finish, no crevice-free joint geometry and no material certificate. On a product contact line that difference shows up at the first swab test, not on the purchase order.
Installing and Living With It
Bring the two ferrule faces square before closing the clamp. Fit the gasket dry and seated in the groove, then tighten the clamp evenly; overtightening extrudes the gasket into the bore.
Purge the bore with inert gas before welding and keep heat input low so the heat affected zone does not discolour. Polish the internal weld to the finish specified for the rest of the line.
Do not use tape or sealant on a hygienic union thread. The seal is made by the gasket at the liner seat, not by the thread, so check the gasket is seated before tightening the nut.
Align the flange faces parallel before drawing the bolts up, and tighten opposite pairs in stages so the gasket is loaded evenly across the face.
Keep the duty inside the stated working temperature range of -20 C to 120 C. Running a CIP cycle hotter than the seal material allows is the most common cause of early failure on this item.
Do not exceed the 0-20Bar working pressure. Where the line sees pressure pulsation, specify a heavy duty or bolted clamp at the joints either side.
Record the standard, size, material and seal material fitted, so the replacement ordered in two years matches what is installed today.
Others in the Tees Range
Sanitary Stainless Steel Welded Equal Tee for Hygienic Fluid Distribution
Sanitary Stainless Steel 45 Degree Welded Y Tee for Food and Beverage Systems
Sanitary Stainless Steel Lateral Y Tee with Tri-Clamp Connection for Food Equipment
Sanitary Stainless Steel Welded Y-Type Tee for Hygienic Fluid Systems
Guides That Cover This Item
Sanitary Fitting Standards Compared AS1528 BS4825 DIN SMS and RJT
Six standards, one job. Here is what actually differs between them and how to tell which one your plant already uses before you or...
304 or 316L Stainless Steel for Hygienic Process Equipment
Both are supplied as standard on everything in this catalogue. The choice is about chlorides and welding, not about one grade bein...
Surface Finish Ra and Why Polished Is Not a Specification
Ra 0.8 um is the standard finish on everything here, with Ra 0.6 um and Ra 0.4 um available. This is what the figure means and whe...
Industries This Item Serves
Related Capability
Sanitary Stainless Steel Clamped Equal Tee FAQ
What we are asked before this item is ordered.
What sizes is the Sanitary Stainless Steel Clamped Equal Tee available in
The catalogue range is 1"-6". Dimensions follow the AS, BS, 3A, DIN, SMS, ISO standards. Confirm the tube outside diameter and wall thickness you work to when you enquire and we will match the exact dimensions before production.
Which material should I specify for the Sanitary Stainless Steel Clamped Equal Tee
Material options are SS 304 or SS 316L. Choose 316L where chlorides are present or where the item will be welded into a line that has to be validated; 304 is adequate for neutral product and standard caustic CIP. Material certificates to EN 10204 3.1 are available on request.
Which seal material suits my cleaning cycle
The Sanitary Stainless Steel Clamped Equal Tee is supplied with EPDM/SILICON/PTFE/VITON sealing options. EPDM is the default for hot water and caustic CIP, silicone for high temperature steam contact, PTFE for aggressive chemicals and Viton for oils and fats. Tell us the media and the peak CIP temperature and we will specify it on the order.
What is the lead time and minimum order for this item
Standard catalogue items such as the Sanitary Stainless Steel Clamped Equal Tee are typically 7-15 days, and small quantity orders of standard items are accepted. Custom sizes, special connections and bulk quantities are quoted with a confirmed date before production starts.
Quote the Sanitary Stainless Steel Clamped Equal Tee
Send the size, media, working pressure, temperature and the standard you work to. We confirm dimensions, material and finish in writing before quoting.