Sanitary Stainless Steel 360-degree Rotating Spray Ball
Clamp Butterfly Valve comes with a pull-trigger locking mechanism to control process flow.
Why Engineers Specify This Item
- Tri-clamp connections allow for easy field disassembly for clean-in-place processes.
- This product comes standard in 316L stainless steel alloy.
- We recommend clamp gaskets and our single-pin heavy duty clamp in order to safely connect this product to the rest of your system.
- Butterfly Valve Operating Manua l Tri-Clamp Butterfly Valve Part
What It Prevents
- Shadowed areas behind agitator shafts and baffles that a fixed ball never reaches
- CIP cycles run longer and hotter than necessary to compensate for poor coverage
- Devices sized for a flow rate the CIP pump cannot actually deliver
Technical Data
Figures below are the catalogue range for this item. Exact dimensions are confirmed in writing against the standard you work to before production.
This item is specified against your duty rather than from a fixed data sheet. Send the line size, media, working pressure and temperature and we will confirm the full specification in writing.
Materials
- AISI 304
- AISI 316L
Manufacturing Process
- Machining
- Forming and welding
- Interior polishing
- Assembly
- Quality inspection
Quality Control
- Dimensional check against the standard stated on the order
- Surface finish verified against the specified Ra figure
- Visual and leak inspection before packing
- Material certificates to EN 10204 3.1 available on request
Where It Is Installed
- Cleaning a mixing vessel with an internal agitator
- Tall narrow tanks where a fixed ball cannot reach the top corners
- Retrofitting CIP into a vessel that was cleaned manually
- Reducing cycle time on a validated cleaning regime
Who Buys It
- Plants validating tank cleaning with a riboflavin or swab test
- Producers trying to cut CIP water, chemical and cycle time
- Tank builders specifying the cleaning device with the vessel
What It Is Built To
- 3-A
- FDA
- CE
What We Can Change
- Non-standard sizes made to your dimensions
- Special connection types and mixed-standard ends
- Customised surface finish down to Ra 0.4 um
- Seal material selected for your media and CIP cycle
How It Compares
Compared with Sanitary Manways
Specify the Sanitary Stainless Steel 360-degree Rotating Spray Ball where the duty is what this category is built for: fixed and rotating CIP devices that put cleaning solution on every internal surface of a tank. Move to sanitary manways instead where the requirement is round, square, oval and pressure manways that give safe access into a tank and still hold the vessel rating.
Compared with Sanitary Sight Glasses
Specify the Sanitary Stainless Steel 360-degree Rotating Spray Ball where the duty is what this category is built for: fixed and rotating CIP devices that put cleaning solution on every internal surface of a tank. Move to sanitary sight glasses instead where the requirement is inline and tank mounted sight glasses so operators can see the product without breaking into the line.
Compared with A general industrial equivalent
An industrial-grade part of the same nominal size is usually cheaper and carries no declared hygienic surface finish, no crevice-free joint geometry and no material certificate. On a product contact line that difference shows up at the first swab test, not on the purchase order.
Installing and Living With It
Bring the two ferrule faces square before closing the clamp. Fit the gasket dry and seated in the groove, then tighten the clamp evenly; overtightening extrudes the gasket into the bore.
Record the standard, size, material and seal material fitted, so the replacement ordered in two years matches what is installed today.
Guides That Cover This Item
CIP Design Checklist for Hygienic Pipework
Most cleaning failures are layout problems, not chemistry problems. Work through this before the line is welded, because afterward...
Industries This Item Serves
Related Capability
Sanitary Stainless Steel 360-degree Rotating Spray Ball FAQ
What we are asked before this item is ordered.
How do I get a full specification for the Sanitary Stainless Steel 360-degree Rotating Spray Ball
This item is specified against your duty rather than from a fixed data sheet. Send the line size, media, working pressure, temperature and the standard you work to, and we will confirm dimensions, material and finish in writing before quoting.
What is the lead time and minimum order for this item
Standard catalogue items such as the Sanitary Stainless Steel 360-degree Rotating Spray Ball are typically 7-15 days, and small quantity orders of standard items are accepted. Custom sizes, special connections and bulk quantities are quoted with a confirmed date before production starts.
Quote the Sanitary Stainless Steel 360-degree Rotating Spray Ball
Send the size, media, working pressure, temperature and the standard you work to. We confirm dimensions, material and finish in writing before quoting.