Sanitary Pneumatic Butterfly Valve CIP Tri-Clamp Connection
Clamp Butterfly Valve comes with a pull-trigger locking mechanism to control process flow.
Why Engineers Specify This Item
- Tri-clamp connections allow for easy field disassembly for clean-in-place processes.
- This product comes standard in 316L stainless steel alloy.
- We recommend clamp gaskets and our single-pin heavy duty clamp in order to safely connect this product to the rest of your system.
- Butterfly Valve Operating Manua l Tri-Clamp Butterfly Valve Part
What It Prevents
- Seats that harden after repeated hot CIP and start weeping across the disc
- Handles that creep open under line vibration and let product bypass a closed branch
- Powder lines where a standard liquid seat packs solid and jams the disc
Technical Data
Figures below are the catalogue range for this item. Exact dimensions are confirmed in writing against the standard you work to before production.
This item is specified against your duty rather than from a fixed data sheet. Send the line size, media, working pressure and temperature and we will confirm the full specification in writing.
Materials
- AISI 304
- AISI 316L
Manufacturing Process
- Machining
- Forming and welding
- Interior polishing
- Assembly
- Quality inspection
Quality Control
- Dimensional check against the standard stated on the order
- Surface finish verified against the specified Ra figure
- Visual and leak inspection before packing
- Material certificates to EN 10204 3.1 available on request
Where It Is Installed
- Tank bottom discharge on a mixing vessel
- Branch isolation on a CIP supply and return header
- Diverting flow between two filling heads
- Powder discharge under a silo cone
Who Buys It
- Skid builders who need a short face-to-face valve where there is no room for a ball valve
- Dairy and beverage plants running frequent hot caustic cleaning cycles
- Powder handling lines discharging from silos and tank bottoms
What It Is Built To
- 3-A
- FDA
- CE
What We Can Change
- Non-standard sizes made to your dimensions
- Special connection types and mixed-standard ends
- Customised surface finish down to Ra 0.4 um
- Seal material selected for your media and CIP cycle
How It Compares
Compared with Sanitary Ball Valves
Specify the Sanitary Pneumatic Butterfly Valve CIP Tri-Clamp Connection where the duty is what this category is built for: compact on-off isolation for hygienic pipework, from a hand lever on a 1 inch transfer line to a pneumatic actuator on a tank outlet. Move to sanitary ball valves instead where the requirement is full bore shut-off where the line must drain clean and the pressure drop has to stay near zero, including 3-way and 4-way diverting bodies.
Compared with Sanitary Diaphragm Valves
Specify the Sanitary Pneumatic Butterfly Valve CIP Tri-Clamp Connection where the duty is what this category is built for: compact on-off isolation for hygienic pipework, from a hand lever on a 1 inch transfer line to a pneumatic actuator on a tank outlet. Move to sanitary diaphragm valves instead where the requirement is the valve to use when the actuation mechanism must be completely isolated from the product, for high purity water, media and sterile transfer.
Compared with A general industrial equivalent
An industrial-grade part of the same nominal size is usually cheaper and carries no declared hygienic surface finish, no crevice-free joint geometry and no material certificate. On a product contact line that difference shows up at the first swab test, not on the purchase order.
Installing and Living With It
Bring the two ferrule faces square before closing the clamp. Fit the gasket dry and seated in the groove, then tighten the clamp evenly; overtightening extrudes the gasket into the bore.
Record the standard, size, material and seal material fitted, so the replacement ordered in two years matches what is installed today.
Others in the Butterfly Valves Range
Stainless Steel Sanitary Powder Butterfly Valve for Tank Bottom Discharge
Sanitary Manual Male-Welded Butterfly Valve
Stainless Steel Food Grade Sanitary Pneumatic Butterfly Valve with Limit Switch
Sanitary Stainless Steel Sanitary Flange Valve | Food Grade
Guides That Cover This Item
How to Choose Between Butterfly Ball Diaphragm and Check Valves
Four valve families, four different jobs. Picking on price rather than duty is how you end up with a valve that cleans badly or we...
Industries This Item Serves
Related Capability
Sanitary Pneumatic Butterfly Valve CIP Tri-Clamp Connection FAQ
What we are asked before this item is ordered.
How do I get a full specification for the Sanitary Pneumatic Butterfly Valve CIP Tri-Clamp Connection
This item is specified against your duty rather than from a fixed data sheet. Send the line size, media, working pressure, temperature and the standard you work to, and we will confirm dimensions, material and finish in writing before quoting.
What is the lead time and minimum order for this item
Standard catalogue items such as the Sanitary Pneumatic Butterfly Valve CIP Tri-Clamp Connection are typically 7-15 days, and small quantity orders of standard items are accepted. Custom sizes, special connections and bulk quantities are quoted with a confirmed date before production starts.
Quote the Sanitary Pneumatic Butterfly Valve CIP Tri-Clamp Connection
Send the size, media, working pressure, temperature and the standard you work to. We confirm dimensions, material and finish in writing before quoting.