Process
How It Runs, Step by Step
Match the pan
Supports and brackets are quoted with the pan that shares the application, not as a separate order.
Check the reference
Recorded numbers include 8D0, 4B0, 330, 1H0 and 06A families on the VW side and 90448 177, 96 184 912 and 96 550 221 on the GM side.
Confirm the casting
Support castings carry mount loads, so section thickness and bore position are checked against the sample.
Produce together
Pans and supports scheduled in the same production window.
Pack together
Shipped in one consignment so a workshop order does not arrive in two freight events.
Outcome
The mount, the bracket and the pan arrive in the same carton instead of from three suppliers.
Every figure and capability named on this page is one RUIFAN recorded on its original site. Where a detail was never recorded, it is agreed per programme rather than stated here.
What the factory records
- Founded 1994 in Ruian, Zhejiang
- Stated annual oil pan output of 500,000 pieces
- Quality systems recorded as ISO 9001 and TS 16949
- Deep and shallow draw stamping; die, sand and gravity casting
- Chrome plating and vacuum metallization
- Development of oil pans and aluminum castings from customer samples or drawings
Background Reading
How Will I Know I Have a Bad Oil Pan
How a failing oil pan announces itself, why a dent is usually not an emergency, and when replacement is the right call.
Do They Make Different Oil Pans
Why engine code, sensor-hole configuration and drain-plug position decide fitment, and how to use an OE number properly.
Stamped Steel vs Cast Aluminum Oil Pans
How a drawn steel pan and a cast aluminum sump differ in structure, failure mode and repairability, and what that means when you source a replacement.
Questions About Engine Support and Bracket Supply
How long does engine support and bracket supply take?
Lead time was not recorded in the archived catalogue and is confirmed per programme, because it depends on whether tooling exists, how many references are in the order and where it is shipping.
What do you need from us to start?
For catalogue references, the number list, quantities and destination market. For anything not in the catalogue, a sample, a drawing or a dimensioned photograph.
Who owns the tooling?
Tooling cost, lead time and ownership are agreed in writing before any work begins. Nothing on that is assumed.
Can this run alongside a catalogue order?
Yes, and it usually should. Consolidating is what makes low-volume references economic to produce and to ship.
What quality systems apply?
ISO 9001 and TS 16949 are the systems RUIFAN recorded on its original site. Certificate numbers and validity dates are supplied on request.
Start With Engine Support and Bracket Supply
Send what you have — a number list, a drawing or a sample. We will tell you what the catalogue covers and what needs tooling.