Fiat Parts
oil pan 40418987
| Vehicle brand block | Fiat Parts |
|---|---|
| Part type | Oil Pan |
Fields that were empty in the original catalogue database are shown as not recorded. No specification on this page has been invented.
Product overview
Fiat Oil Pan
40418987 is a oil pan in the RUIFAN Fiat range. It is one of 12 references in the Fiat Parts block and one of 136 across the catalogue as a whole.
It ships mixed with other catalogue lines, which is what makes a low-volume reference worth stocking at all.
This is a wet-sump reservoir: it holds the oil, keeps it over the pump pickup under braking and cornering, and seals the bottom of the crankcase against a machined or pressed flange. The archived record for this reference holds the catalogue name, the vehicle brand block and the photograph; nothing further was stored, and nothing further is claimed here.
What this reference is used for
- Engine reconditioning and rebuild programmes
- Aftermarket catalogue coverage across a number family
- Private-label and importer programmes
- Fleet and workshop stock for recurring service work
Specifications
40418987 Data Sheet
Everything RUIFAN holds on this reference, taken from the archived catalogue record.
| Catalogue name | oil pan 40418987 |
|---|---|
| Part type | Oil Pan |
| Vehicle brand block | Fiat Parts |
| Manufacturer | Ruian Ruifan Engine Parts Co Ltd, Ruian, Zhejiang, China |
| Quality systems | ISO 9001, TS 16949 (as recorded by RUIFAN) |
Not recorded in the archive
These fields were not stored in the original catalogue database. They are confirmed per order rather than estimated here.
Who it is for
Buyers Who Order This Reference
OE and tier programme buyers
Engineering buyers who arrive with a drawing or a sample instead of a catalogue number.
Classic and long tail specialists
Single-marque and restoration businesses that keep selling references mainstream catalogues have already dropped.
Aftermarket distributors
Warehouse distributors and wholesalers building coverage across a whole Fiat number family rather than a single fast mover.
Problems it solves
What Brings Buyers to This Part
- The pan on the vehicle is dented, corroded or leaking, and the engine cannot go back into service until it is replaced.
- The drain boss thread has been stripped by repeated servicing and a thread insert is not an acceptable repair.
- A catalogue line has gone dead because the previous supplier stopped tooling this reference.
- The number is quoted under two or three different references in different markets and the buyer cannot confirm they are the same casting.
Key benefits
Why Buy 40418987 From RUIFAN
No invented specifications: anything the archive did not record is shown as not recorded
Supplied against the reference recorded in the catalogue, not against a guessed equivalent
Archive photograph published at working size so flange pattern and drain position can be checked before ordering
Produced in the plant that holds the rest of the Fiat Parts block, so packing and marking are consistent across a programme
Quotable as a single line or as part of a wider order across the Fiat Parts range
Manufactured under the quality systems recorded by RUIFAN: ISO 9001 and TS 16949
Materials and manufacturing
How This Oil Pan Is Produced
The archived record does not state a material for this reference. RUIFAN produces both drawn steel and cast aluminum parts of this type, and the correct construction is confirmed against the part being replaced before production is scheduled.
Confirm construction
Material and method confirmed against the part being replaced or a supplied sample.
Form or cast
Drawn from sheet, or die, gravity or sand cast, according to what the original part is.
Machine and finish
Sealing faces, bores and threads finished to the reference.
Inspect and pack
Checked against the reference sample, then packed with the sealing face protected.
Manufacturing methods listed here are the ones recorded on the original RUIFAN services page: deep and shallow draw stamping; die casting, sand casting and gravity casting; chrome plating and vacuum metallization. The method used for a given reference is confirmed against the part being replaced.
Quality control
Quality Systems Behind This Reference
RUIFAN recorded ISO 9001 and TS 16949 quality systems on its original site. Certificate numbers and validity dates were not stored in the archived material and are supplied on request rather than stated here.
Sealing flange
Flatness across the full perimeter decides whether the part seals at all. It is the first thing to check on arrival.
Drain boss
Thread condition and squareness to the boss face, checked before packing.
Dimensional check
Against the reference sample for the catalogue number being run.
Packing
Flange protection specified per programme, because a bent flange makes a sound part unusable.
Customisation
If This Reference Is Not Exactly What You Need
The original RUIFAN site stated that the factory develops oil pans and other aluminum castings from customer-supplied samples or drawings. That route covers references that never made it into the catalogue, superseded parts whose tooling has been scrapped, and private-label variants of an existing part.
A physical sample is enough to start. Where no sample survives, a dimensioned drawing or a 3D file works. Tooling cost, lead time and ownership are agreed in writing before any work begins.
What to send with an enquiry
- The number stamped or cast into the part being replaced
- The vehicle, the engine code and the production year
- A photograph of the flange face and one of the drain boss side
- Annual quantity, or the quantity for a first order
- Destination market, which affects packing and documentation
Comparison
40418987 Against the Alternatives
How sourcing this reference from RUIFAN compares with the other routes a buyer has.
| Option | What you get | Where it falls short |
|---|---|---|
| RUIFAN catalogue supply | The reference held in a 136-number catalogue with the archive data published alongside it, produced in one plant with one packing standard. | Fields the original database never recorded are shown as not recorded rather than filled in. |
| Original equipment channel | Guaranteed fitment and full manufacturer documentation. | Highest unit cost, and older references are progressively withdrawn from supply. |
| Local pattern part supply | Short lead time and no import handling. | Coverage is usually limited to fast movers, so the long tail of a number family stays unsourced. |
| Used or reclaimed oil pan | Lowest purchase cost, sometimes the only route for a withdrawn reference. | Flange flatness, thread condition and corrosion are unknown until it is on the bench. |
Use guide
Identifying and Fitting 40418987
A working sequence for confirming the reference and fitting it without a repeat leak.
- Confirm the reference against the number cast or stamped into the part you are replacing, not against the parts system entry.
- Compare the archive photograph on this page with the part on the vehicle: flange outline, bolt count, drain boss side and overall depth.
- Check whether the application requires an oil level sensor boss. Two otherwise identical references can differ on this alone.
- Clean both the pan flange and the block face completely before fitting. Old gasket material and oil film are the usual cause of a repeat leak.
- Check the new pan sits flat against the block dry, before any gasket or sealant goes on.
- Follow the engine manufacturer's gasket or sealant specification. Do not add sealant on top of a moulded gasket.
- Torque from the centre of each long side outwards in at least two passes, and respect the sealant cure time before filling with oil.
Torque figures, sealant specification and gasket type are set by the vehicle manufacturer for the engine concerned. Follow that procedure rather than a generic figure.
Questions About 40418987
What vehicle does 40418987 fit?
The archived catalogue record lists this reference in the Fiat Parts block. No vehicle application table was stored for this reference in the original database, so none is shown. Send the vehicle, the engine code and the number from the old part and we will confirm against the catalogue before quoting.
What is 40418987 made from?
The original catalogue record did not state a material for this reference, so none is published. RUIFAN produces both drawn steel and cast aluminum parts of this type, and the correct construction is confirmed against a sample or the part being replaced before quoting.
Can you supply this reference together with other Fiat lines?
Yes. The Fiat Parts block holds 12 references and they are normally quoted and shipped together. Consolidating is what makes low-volume lines viable in the first place.
What if the number I need is not in your catalogue?
The original RUIFAN site stated that the factory develops oil pans and other aluminum castings from customer-supplied samples or drawings. Send a sample, a drawing or a dimensioned photograph and we will review whether it can be tooled.
What quality systems does the factory work to?
The original RUIFAN site recorded ISO 9001 and TS 16949. Current certificate numbers and validity dates are not published here because they were not in the archived material; they are provided on request.
Related References in Fiat Parts
Guides That Help With This Part
Upper and Lower Two Piece Oil Pans
What an upper pan does that a lower sump does not, and how to avoid ordering the wrong half of a two-piece system.
Die Casting Sand Casting and Gravity Casting for Engine Parts
The three casting methods listed in the RUIFAN process sheet, what each one is good for, and how the choice shows up in the finished part.
Deep and Shallow Draw Stamping for Oil Pans
How a steel pan is drawn, where the metal thins, and why draw depth is the constraint that decides tooling.
Request a Quote for 40418987
Send the reference, the quantity and the destination market. We will confirm the part against the catalogue record before quoting.