VW Parts
GEARBOX COVER 02A 301 211A
| Vehicle brand block | VW Parts |
|---|---|
| Part type | Gearbox Cover |
Fields that were empty in the original catalogue database are shown as not recorded. No specification on this page has been invented.
Product overview
VW Gearbox Cover
RUIFAN lists 02A 301 211A as a gearbox cover in its VW range. The part is produced in Ruian, Zhejiang, in the same plant that handles the rest of the VW Parts catalogue.
It is supplied to aftermarket distributors, engine rebuilders and workshops, and can be quoted as part of a wider order covering other references in the same number family.
A gearbox cover closes a transmission housing against a sealing face that has to stay flat. It is a low-value part that holds up a high-value rebuild when it is not available, which is why it is kept in the catalogue. The archived record for this reference holds the catalogue name, the vehicle brand block and the photograph; nothing further was stored, and nothing further is claimed here.
What this reference is used for
- Aftermarket coverage of transmission housing parts
- Transmission rebuild and reconditioning work
- Replacement of a damaged or corroded cover
Specifications
02A 301 211A Data Sheet
Everything RUIFAN holds on this reference, taken from the archived catalogue record.
| Catalogue name | GEARBOX COVER 02A 301 211A |
|---|---|
| Part type | Gearbox Cover |
| Vehicle brand block | VW Parts |
| Manufacturer | Ruian Ruifan Engine Parts Co Ltd, Ruian, Zhejiang, China |
| Quality systems | ISO 9001, TS 16949 (as recorded by RUIFAN) |
Not recorded in the archive
These fields were not stored in the original catalogue database. They are confirmed per order rather than estimated here.
Who it is for
Buyers Who Order This Reference
Importers and private label brands
Brand owners who sell under their own label and need the factory behind that label to stay the same from season to season.
OE and tier programme buyers
Engineering buyers who arrive with a drawing or a sample instead of a catalogue number.
Classic and long tail specialists
Single-marque and restoration businesses that keep selling references mainstream catalogues have already dropped.
Problems it solves
What Brings Buyers to This Part
- A rebuild is held on the bench for a low-value cover that nobody local stocks.
- The cover is damaged and the gearbox cannot be closed up until a correct replacement arrives.
- Cover references sit between engine and transmission catalogues and fall through the gap in most parts systems.
Key benefits
Why Buy 02A 301 211A From RUIFAN
Scheduled against a stated annual oil pan output of 500,000 pieces
Long-tail references consolidated with volume lines instead of being dropped
No invented specifications: anything the archive did not record is shown as not recorded
Supplied against the reference recorded in the catalogue, not against a guessed equivalent
Archive photograph published at working size so flange pattern and drain position can be checked before ordering
Produced in the plant that holds the rest of the VW Parts block, so packing and marking are consistent across a programme
Materials and manufacturing
How This Gearbox Cover Is Produced
The archived record does not state a material for this reference. RUIFAN produces both drawn steel and cast aluminum parts of this type, and the correct construction is confirmed against the part being replaced before production is scheduled.
Blank and draw
A flat blank is drawn into the die. Deep sections need more than one operation because the wall can only thin so far per stroke.
Form the flange
The sealing flange is formed and pierced to the bolt pattern.
Join the deep section
Where the profile requires it, a separately drawn deep section is joined to the main body.
Finish and inspect
Coating applied, then flange flatness and bolt pattern checked against the reference sample.
Manufacturing methods listed here are the ones recorded on the original RUIFAN services page: deep and shallow draw stamping; die casting, sand casting and gravity casting; chrome plating and vacuum metallization. The method used for a given reference is confirmed against the part being replaced.
Quality control
Quality Systems Behind This Reference
RUIFAN recorded ISO 9001 and TS 16949 quality systems on its original site. Certificate numbers and validity dates were not stored in the archived material and are supplied on request rather than stated here.
Sealing flange
Flatness across the full perimeter decides whether the part seals at all. It is the first thing to check on arrival.
Drain boss
Thread condition and squareness to the boss face, checked before packing.
Dimensional check
Against the reference sample for the catalogue number being run.
Packing
Flange protection specified per programme, because a bent flange makes a sound part unusable.
Customisation
If This Reference Is Not Exactly What You Need
The original RUIFAN site stated that the factory develops oil pans and other aluminum castings from customer-supplied samples or drawings. That route covers references that never made it into the catalogue, superseded parts whose tooling has been scrapped, and private-label variants of an existing part.
A physical sample is enough to start. Where no sample survives, a dimensioned drawing or a 3D file works. Tooling cost, lead time and ownership are agreed in writing before any work begins.
What to send with an enquiry
- The number stamped or cast into the part being replaced
- The vehicle, the engine code and the production year
- A photograph of the flange face and one of the drain boss side
- Annual quantity, or the quantity for a first order
- Destination market, which affects packing and documentation
Comparison
02A 301 211A Against the Alternatives
How sourcing this reference from RUIFAN compares with the other routes a buyer has.
| Option | What you get | Where it falls short |
|---|---|---|
| RUIFAN catalogue supply | The reference held in a 136-number catalogue with the archive data published alongside it, produced in one plant with one packing standard. | Fields the original database never recorded are shown as not recorded rather than filled in. |
| Original equipment channel | Guaranteed fitment and full manufacturer documentation. | Highest unit cost, and older references are progressively withdrawn from supply. |
| Local pattern part supply | Short lead time and no import handling. | Coverage is usually limited to fast movers, so the long tail of a number family stays unsourced. |
| Used or reclaimed gearbox cover | Lowest purchase cost, sometimes the only route for a withdrawn reference. | Flange flatness, thread condition and corrosion are unknown until it is on the bench. |
Use guide
Identifying and Fitting 02A 301 211A
A working sequence for confirming the reference and fitting it without a repeat leak.
- Confirm the reference against the number on the cover being replaced.
- Check the sealing face for flatness before fitting.
- Clean both faces completely and use the sealant or gasket the transmission manufacturer specifies.
- Torque evenly in a cross pattern in two passes.
Torque figures, sealant specification and gasket type are set by the vehicle manufacturer for the engine concerned. Follow that procedure rather than a generic figure.
Questions About 02A 301 211A
What vehicle does 02A 301 211A fit?
The archived catalogue record lists this reference in the VW Parts block. No vehicle application table was stored for this reference in the original database, so none is shown. Send the vehicle, the engine code and the number from the old part and we will confirm against the catalogue before quoting.
What are the minimum order quantity and lead time for 02A 301 211A?
Minimum order quantity, carton quantity and lead time were not recorded in the archived catalogue and are confirmed per order, because they depend on whether the reference is being run on its own or alongside other lines in the same family.
Do you have cross reference numbers for this part?
No alternate numbers were stored against this reference in the original database, so none are published here. Twenty of the 136 catalogue records do carry recorded alternates. If you hold a number you believe matches this part, send it with a photograph and we will check.
What is 02A 301 211A made from?
The original catalogue record did not state a material for this reference, so none is published. RUIFAN produces both drawn steel and cast aluminum parts of this type, and the correct construction is confirmed against a sample or the part being replaced before quoting.
Can you supply this reference together with other VW lines?
Yes. The VW Parts block holds 52 references and they are normally quoted and shipped together. Consolidating is what makes low-volume lines viable in the first place.
Related References in VW Parts
Guides That Help With This Part
Upper and Lower Two Piece Oil Pans
What an upper pan does that a lower sump does not, and how to avoid ordering the wrong half of a two-piece system.
Die Casting Sand Casting and Gravity Casting for Engine Parts
The three casting methods listed in the RUIFAN process sheet, what each one is good for, and how the choice shows up in the finished part.
Deep and Shallow Draw Stamping for Oil Pans
How a steel pan is drawn, where the metal thins, and why draw depth is the constraint that decides tooling.
Request a Quote for 02A 301 211A
Send the reference, the quantity and the destination market. We will confirm the part against the catalogue record before quoting.