Artos Stenter Pin Plate 4 x 130 x 12 mm
Pin plate for Artos stenter rails, 4 x 130 x 12 mm with two 4 mm fixing holes on 76 mm centres. Artos machines are German-built and still run in finishing mills across Asia and Europe, where the pin rails wear long before the machine does. Copper plate body, carbon steel or stainless steel pins.
Key Benefits
- 4 x 130 x 12 mm with 4 mm holes on 76 mm centres, matched to the Artos holder
- Two pin rows at 3 to 4 pins per cm, pins about 5 mm proud
- Copper plate body keeps the pin roots cooler in the chamber
- Stocked so an Artos rail does not wait on a German OEM order
Application Scenarios
- Artos pin rails worn after long heat setting runs
- Older Artos machines kept in service past OEM parts support
- Mills running Artos alongside Monforts on the same floor
Who It Is For
- Textile finishing mills running Artos pin stenters
- Maintenance teams rebuilding a pin rail after a chain overhaul
- Machinery dealers and service companies holding spare part stock for customers
- Mills keeping an older Artos machine in production where OEM support has thinned out
Problems It Solves
- Worn or bent pins let the selvedge slip, so the fabric loses width and the edge frays.
- Artos spare parts becoming slow or expensive to source through the original channel.
- OEM plates can take weeks to arrive and the stenter stands still while you wait.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Application: Monforts stenter
- Size: 4*130*12, hole to hole 76mm, 2 holes, hole 4mm
- Material: plate:copper / pin: corban steel or stainless steel
- Colour: silver and yellow
- Brand: XTY
- Origin: Zhejiang, China
Specifications
| Application | Monforts stenter |
|---|---|
| Size | 4*130*12, hole to hole 76mm, 2 holes, hole 4mm |
| Material | plate:copper / pin: corban steel or stainless steel |
| Colour | silver and yellow |
| Brand | XTY |
| Origin | Zhejiang, China |
Quality Control
- Dimensions gauged against the reference part on every production batch
- Fit checked on a rail or chain section before packing
- Material certificate held for the stock used
- Parts packed in matched sets from one batch so wear is even along the rail
Customisation Options
- Hole centres matched from your Artos sample
- Stainless steel pins on request
- Matched full-rail sets
How It Compares
| Compared With | What Changes |
|---|---|
| Artos pin plate second pattern | We list two Artos plates. Check the hole centres and plate length against your old plate before ordering. |
| Artos clips | Pins take higher tension and run faster; clips leave the selvedge unmarked. |
Fitting and Replacing This Part
Step 1
Stop the machine and let the assembly cool before stripping it
Step 2
Note how the old part sits before removing it
Step 3
Clean the seat completely before fitting the new part
Step 4
Turn the rail by hand for one full pass and check free movement
Step 5
Replace in complete sets so grip and wear stay even across the machine
Related Solutions
- Custom Part Manufacturing From Samples — Pin plates, pin plate holders, clips, brush wheels and other metal parts made to customer requirement, from a sample or a drawing.
- Complete Stenter Rail Rebuild — Chain, pin plates, holders, clips, sliders and graphite strip quoted and shipped as one matched package.
Industries Using This Part
Artos Stenter Pin Plate 4 x 130 x 12 mm Questions
What are the plate dimensions?
4 x 130 x 12 mm, two fixing holes of 4 mm, hole to hole 76 mm.
Do you also convert Artos rails to Monforts?
Yes. We do rail guide conversion work, Artos rail changed to Monforts rail. Ask us with your machine details.
Will an Artos plate fit a Bruckner rail?
Not reliably. The hole patterns differ between brands. Always match on hole centres and plate length.
How long is delivery?
Standard plates ship within 7 days of order confirmation.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.