BESLUX High Temperature Chain Oil From Spain
BESLUX chain lubrication oil, made in Spain, for stenter chains. A stenter chain runs hot and fast, and the wrong oil either slings off the chain or breaks down in the chamber. The qualities that matter are viscosity and adhesion, high temperature stability, anti-wear and anti-corrosion additives, and low friction.
Key Benefits
- High viscosity with good adhesion, so it stays on the chain and does not sling off at speed
- Stable at the temperatures a stenter chamber runs at
- Anti-wear and anti-corrosion additives protect against wear and rust in humid conditions
- Reduces friction, which improves efficiency and extends chain life
Application Scenarios
- Annual chain servicing on any stenter brand
- Machines in humid mills where chains rust between runs
- High speed lines where cheaper oils sling off the chain
Who It Is For
- Finishing mills servicing stenter chains
- Maintenance teams setting up a lubrication schedule
- Machinery dealers supplying consumables alongside spare parts
Problems It Solves
- Oil slinging off the chain at high speed and leaving the bearing surfaces dry.
- Lubricant breaking down at chamber temperature and leaving deposits.
- Chain corrosion in humid mills between production runs.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Brand: BESLUX
- Origin: Spain
- High viscosity with good adhesive properties
- High temperature stability
- Anti-wear and anti-corrosion additives
- Low friction formulation
Specifications
| Application | LK stenter chain |
|---|---|
| Material | high quality oil |
| Brand | beslux |
| Origin | Zhejiang, China |
Quality Control
- Supplied in sealed original BESLUX packaging
- Batch and origin traceable to the manufacturer
- Stored away from heat and direct sun before shipping
Customisation Options
- Supplied in the pack sizes BESLUX offers
- Shipped alongside chain and spare parts in one consignment
How It Compares
| Compared With | What Changes |
|---|---|
| General purpose chain oil | General oils lack the high temperature stability and the adhesion a stenter chain needs. They sling off or break down. |
| High temperature grease | Grease is what most of our customers use at the annual service, DuPont, Miller or Kluber grade. Oil is the choice where the chain is lubricated in service. |
Fitting and Replacing This Part
Step 1
Clean the guide and the chain before lubricating, at least once a year
Step 2
Apply to a warm but not hot chain so the oil penetrates
Step 3
Work the chain through a full pass so lubricant reaches every bearing surface
Step 4
Wipe off surplus that could reach the fabric
Step 5
Record the service date so the annual interval is not missed
Related Solutions
- Rail Guide Conversion — Artos rail changed to Monforts rail, LK rail changed to Monforts rail, so a mixed machine park runs on one parts list.
- Multi-Brand Spare Parts Sourcing — Monforts, Bruckner, Artos, LK, IL SUNG, Stentex, Krantz, EHWHA, ALKAN, Unitech, ACC and Italian compact machines from one purchase order.
Industries Using This Part
Guides That Mention This Part
Oil-Free or Lubricated Stenter Guides
An oil-free guide keeps lubricant away from the fabric using graphite strips and PEEK sliders. A lubricated guide uses a grease film. The chain is different for each, and mixing them is a costly mistake.
Read GuideStenter Chain Maintenance and Lubrication
Clean the guide and chain at least once a year, use a high temperature grease, and measure pitch over ten links before you decide to replace anything.
Read GuideBESLUX High Temperature Chain Oil From Spain Questions
Where is BESLUX oil made?
Spain. We stock it alongside the chains and parts we manufacture in Zhejiang.
What makes a good chain oil?
Viscosity and adhesion so it stays on the chain, high temperature stability, anti-wear and anti-corrosion additives, and low friction.
How often should I lubricate?
Clean the guide and the chain at least once a year and lubricate at that service. High speed lines may need it more often.
Can I use it on any brand of stenter?
Yes. It is a chain lubricant, not a brand-specific part.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.