The spring clip that holds a recessed downlight in its ceiling cut-out, zinc plated and formed in a U so the legs press outwards against the plasterboard. Installers judge a downlight almost entirely on how these clips behave.
Leg spread and force are set for the ceiling thickness the fitting is designed around, so the light sits flush and stays there.
An electrician fits these overhead on a ladder. The clip has to be workable with one hand and no tool.
Ceiling voids see condensation. Zinc plating keeps the clip from rusting into place over the fitting's life.
Check clip force against a plasterboard sample at the thinnest ceiling you support. A clip that holds in 15 mm board may not hold in 9 mm.
Downlights that drop out of the ceiling as clip force fades
Clips so stiff that installers damage the ceiling fitting them
Dimensional and load figures are set per order against your drawing or sample, so they are marked TBC rather than filled with catalogue numbers.
| Product Type | Spring Clips |
|---|---|
| Raw Material Options | Stainless steel, Spring steel, Carbon steel, 65Mn, Music wire |
| Wire Diameter Range | 0.1-8 mm |
| Surface Treatment Options | Zinc plating, Nickel plating, Silver plating, Gold plating, Tin plating, Galvanizing in various colours, Dacromet, Black oxide, Phosphating |
| Standard | ISO, non-standard and OEM drawings |
| Processing Route | Material sourcing → Coiling and forming → Heat treatment → Surface treatment → Quality inspection → Packing → Shipping |
| Inspection Equipment | Grinding and shot peening machinery; Precision tensile strength testers; Magnetic powder flaw detectors |
| Packing | Plastic bags, cartons or pallets, or packing to your own specification |
| Payment Terms | L/C, T/T, D/A, D/P, Western Union, 30% deposit before production, 70% balance before shipment |
| Lead Time | 7-15 days after the order is confirmed |
| Minimum Order Quantity | Quoted per part — tell us your requirement (TBC) |
| Dimensions and Load Rating | Made to your drawing or sample (TBC per part) |
Every batch follows the same seven step route, with tensile testing and magnetic powder flaw detection carried out before packing.
Available in Stainless steel, Spring steel, Carbon steel, 65Mn, Music wire, in wire from 0.1-8 mm, with any of our nine surface finishing routes. Geometry, end treatment and finish are all specified per order.
ISO 9001, SGS certificate and RoHS report (stated on the legacy site, certificates pending re-confirmation). Certificate copies are sent on request once re-confirmed.
Against a screw-fixed luminaire, spring clips let a fitting be installed and removed in seconds, at the cost of depending entirely on clip force being right.
Yes. Send the fitting and a clip and we will reproduce the geometry and the force.
Leg spread and wire size are adjusted. Tell us the range of ceiling thickness the fitting must cover.
The clip is our scope. We agree the interface at sampling so it fits your body without adjustment.
Send your drawing, dimensions or a sample. We will confirm the specification and come back with a price and a lead time.
