A stainless flat spring clamp for holding accessories onto equipment, spreading its grip over a wide face so that the accessory is held firmly without being marked. It is the practical alternative to a bracket and a fastener.
Wide strip contact distributes the clamping force rather than concentrating it into a line.
Accessories that need to come off for cleaning or transport can be released by hand.
Equipment accessories move between indoor and outdoor use, and stainless handles both.
Open the clamp only as far as the accessory requires. Repeated over-opening sets the strip and reduces the clamping force permanently.
Accessories marked by the clamps meant to hold them
Bracket and fastener mounts that make an accessory slow to remove
Dimensional and load figures are set per order against your drawing or sample, so they are marked TBC rather than filled with catalogue numbers.
| Product Type | Flat Springs |
|---|---|
| Raw Material Options | Stainless steel, Spring steel, Carbon steel, 65Mn, Music wire |
| Wire Diameter Range | 0.1-8 mm |
| Surface Treatment Options | Zinc plating, Nickel plating, Silver plating, Gold plating, Tin plating, Galvanizing in various colours, Dacromet, Black oxide, Phosphating |
| Standard | ISO, non-standard and OEM drawings |
| Processing Route | Material sourcing → Coiling and forming → Heat treatment → Surface treatment → Quality inspection → Packing → Shipping |
| Inspection Equipment | Grinding and shot peening machinery; Precision tensile strength testers; Magnetic powder flaw detectors |
| Packing | Plastic bags, cartons or pallets, or packing to your own specification |
| Payment Terms | L/C, T/T, D/A, D/P, Western Union, 30% deposit before production, 70% balance before shipment |
| Lead Time | 7-15 days after the order is confirmed |
| Minimum Order Quantity | Quoted per part — tell us your requirement (TBC) |
| Dimensions and Load Rating | Made to your drawing or sample (TBC per part) |
Every batch follows the same seven step route, with tensile testing and magnetic powder flaw detection carried out before packing.
Available in Stainless steel, Spring steel, Carbon steel, 65Mn, Music wire, in wire from 0.1-8 mm, with any of our nine surface finishing routes. Geometry, end treatment and finish are all specified per order.
ISO 9001, SGS certificate and RoHS report (stated on the legacy site, certificates pending re-confirmation). Certificate copies are sent on request once re-confirmed.
Against a bracket and screw mounting, a flat spring clamp is far quicker to use and holds a fixed force, which cannot be adjusted after assembly.
By strip thickness and the bend geometry, adjusted at sampling against your accessory.
Tell us the surface being clamped and we will confirm what is achievable at quoting.
Tell us the expected frequency. A clamp opened daily is designed with more margin than one opened at service intervals.
Send your drawing, dimensions or a sample. We will confirm the specification and come back with a price and a lead time.
