Manufacturing and exporting computer cases and power supplies from Dongguan since 2012
+86 769 2882 8216 [email protected]
Ulike Technology
Request A Quote
Ulike computer case assembly line in Dongguan with staff building tower chassis
Tooling workshop with milling machines used to cut computer case dies at Ulike
Stamping press line forming SPCC and SGCC steel chassis panels at Ulike

Computer Cases and Power Supplies Built for Buyers Who Ship Containers

Ulike Technology has manufactured and exported PC chassis, ATX and Flex power supplies and cooling parts from Dongguan since 2012, to buyers in more than 50 countries.

  • 80 models across cases, power supplies and cooling
  • Clearance and carton data published on every page
  • OEM tooling handled inside the group
  • ISO 9001 and ISO 14001 certified plants
Request A Quote Browse All 80 Models
  • Manufacturing since 2012
  • Exporting to 50+ countries
  • 2 joint venture plants, 600,000 m²
  • Dongguan, Guangdong, China
What We Make

Cases Power and Cooling From One Production Base

Computer cases, switching power supplies and cooling parts. Eighty models across gaming towers, entry level ATX, micro ATX, slim desktop and special shaped chassis, ATX, Micro ATX, Flex and TFX power supplies from 200W to 1000W, and 120 mm RGB case fans.

Gaming Cases manufactured by Ulike Technology

Gaming Cases

33 models · Tempered glass and mesh ATX towers with RGB lighting, front USB 3.0 and long graphics ca

Special Shaped Cases manufactured by Ulike Technology

Special Shaped Cases

7 models · Non-rectangular gaming chassis with angled tempered glass panels for retail shelves that

Entry Level ATX Cases manufactured by Ulike Technology

Entry Level ATX Cases

14 models · Cost-driven full-size ATX towers for office, education and government desktop volume.

Micro ATX Cases manufactured by Ulike Technology

Micro ATX Cases

13 models · Compact M-ATX and ITX towers for small-footprint office, retail POS and thin-client desk

Slim Cases manufactured by Ulike Technology

Slim Cases

4 models · Horizontal and slim-profile desktop shells around 103 to 105 mm wide for low-profile bui

ATX Power Supplies manufactured by Ulike Technology

ATX Power Supplies

2 models · Standard ATX and Micro ATX switching supplies from 200W to 600W for desktop and office b

80 PLUS Power Supplies manufactured by Ulike Technology

80 PLUS Power Supplies

3 models · Higher efficiency ATX supplies in the 300W to 1000W range, including modular units.

1U 2U Flex Power Supplies manufactured by Ulike Technology

1U 2U Flex Power Supplies

2 models · Flex ATX and TFX form factor supplies from 200W to 250W for 1U, 2U and slim chassis.

See Every Model With Full Specifications
Products

Sixteen Models From Across the Catalogue

Every model on this site carries its own specification table, clearance figures and carton data taken from the factory sheet.

Who We Serve

Six Kinds of Buyer With Six Different Problems

Desktop system integrators, PC brands running OEM programmes, esports venues and internet cafes, education and government tender suppliers, industrial and embedded builders, and distributors filling mixed containers.

01

Desktop System Integrators

Chassis, power and cooling that arrive to the same specification every time

02

PC Brands and OEM Programmes

Your own front panel and your own box without funding an outside tool shop

03

Esports Venues and Internet Cafes

Machines that run long hours and are opened often

04

Education and Government Tenders

Cost sheets that hold and specifications you can put in a bid document

05

Industrial and Embedded Builders

Flex and TFX power inside 1U, 2U and slim enclosures

06

Distributors and Wholesalers

Mixed containers with one packing list and one invoice

What Problem We Solve

Chassis Buying Goes Wrong in Predictable Places

Chassis and power supply buying goes wrong in predictable places: clearance figures nobody published, steel gauge that quietly drops on the repeat order, carton dimensions that wreck a container plan, and peak wattage printed where rated wattage should be. Every page on this site publishes those figures so the argument happens before the purchase order rather than after the shipment.

Clearance figures nobody published

A build fails on the line because the graphics card is 8 mm too long. Every chassis page here lists card clearance, cooler height and maximum power supply length.

Steel gauge that drops after the sample

The sample is 0.5 mm and the bulk run is 0.4 mm. Grade and thickness are named on every product page and recorded on the sample sheet.

Carton sizes that wreck a load plan

Freight on chassis is charged on volume. Carton dimensions and gross and net weight are published so the container can be planned before the order.

Peak wattage printed as rated wattage

Every power supply lists rated power and peak power as separate rows, with per-rail load, regulation and ripple below them.

Three suppliers for one container

Cases, power supplies and cooling parts come from one order, one packing list and one booking.

An OEM change that needs an outside tool shop

Die and mould work runs inside the group, so a new bezel or I/O cut-out is a tooling item rather than a subcontract.

Why Buyers Choose Ulike

A Production Base Not a Product Listing

Manufacturing and exporting since 2012 from two ISO 9001 and ISO 14001 certified joint venture plants in Dongguan, with die and mould work inside the group, CE EMC and LVD certificates on the case and power supply lines, and a catalogue wide enough to fill a container from one order.

2012Manufacturing Since
50+ countriesExport Markets
2Joint Venture Plants
80Catalogue Models
  • Established in 2012 as a research, manufacturing and export business for computer components and peripherals
  • Two joint venture factories covering a combined 600,000 square metres
  • Both plants certified to ISO 9001:2000 and ISO 14001:2004
  • Products carry CE, UL, CCC, FCC and 80 PLUS approvals
  • Exporting to more than 50 countries
  • QC officers carry out inspection to control defect-free shipment
Inside the Plant

Stamping Tooling and Assembly Under One Supplier

These are the three operations that decide whether a chassis order goes well: the press shop that sets the steel gauge, the tool room that makes an OEM bezel possible, and the line that assembles and checks the finished unit.

Chassis assembly line in Dongguan. Towers move down a single bench line where panels, drive cages and front I/
Chassis assembly line in Dongguan. Towers move down a single bench line where panels, drive cages and front I/O are fitted and function checked before packing.
Tooling workshop. Die and mould work runs inside the group, which is why a front bezel change or a new I/O cut
Tooling workshop. Die and mould work runs inside the group, which is why a front bezel change or a new I/O cut-out is handled as a tooling item rather than subcontracted.
Stamping press shop. Chassis panels are formed here from SPCC and SGCC coil, which is where the sheet gauge qu
Stamping press shop. Chassis panels are formed here from SPCC and SGCC coil, which is where the sheet gauge quoted on each product page is actually set.
See Certificates and Factory Detail
Solutions

How a Project Actually Runs From Enquiry to Container

Four programmes covering the routes buyers take through this catalogue, each one broken down stage by stage with the problem each stage exists to solve.

01

OEM and ODM Case Development

From a reference photo to a tooled chassis in your own carton

02

CKD Packing and Container Planning

Ship volume, not air, and assemble after arrival

03

Case and Power Supply Matching

One quotation where the supply is known to fit and known to carry the load

04

Private Label and Packaging Programme

Your brand on the chassis, the supply, the box and the manual

Knowledge Centre

Guides Written for People Who Buy These Parts by the Container

Form factor selection, power supply datasheets, steel grades, panel materials, freight planning and factory qualification.

All 8 Guides

Questions Buyers Ask Before the First Order

Are you a factory or a trading company?

Ulike Technology manufactures and exports through two joint venture plants in Dongguan covering a combined 600,000 square metres, both certified to ISO 9001:2000 and ISO 14001:2004. Die and mould work runs inside the group, which is what makes bezel and I/O tooling changes possible rather than subcontracted.

What is the minimum order quantity?

It varies by model, colour and packing option, so publishing one figure would be wrong for most enquiries. Send the model numbers and target quantities on WhatsApp and you will get the MOQ and the price in writing.

Can you make a case with our own front panel and our own box?

Yes. That is the most common OEM request and it is handled as a tooling item on an existing chassis rather than a new design programme. Send a drawing or a photograph of the reference part to start.

Do you publish clearance and carton data before we order?

Every chassis page on this site lists graphics card clearance, CPU cooler height clearance, maximum power supply length, carton dimensions and gross and net weight. Those are the figures that decide whether a build fits and what a container costs.

Which certifications do you hold?

The joint venture plants are certified to ISO 9001:2000 and ISO 14001:2004. CE EMC and CE LVD certificates are held for the computer case line and for the ATX and Micro ATX power supply lines, and the certificate images are shown on the About page. The company also states CE, UL, CCC, FCC and 80 PLUS approvals across its product range.

Can chassis, power supplies and fans ship together?

Yes, on one order, one packing list and one container booking. Filling a mixed container from a single supplier is the main reason distributors work with us.

Which countries do you export to?

More than 50 countries. Tell us your destination port and we will confirm what we already ship there and calculate the load plan from the published carton data.

Send Us Your Model List and Target Quantities

You will get pricing, MOQ, lead time and a container load plan calculated from the published carton data. One reply, in writing, from the engineer who will run the order.

Chat on WhatsApp Email Us Download Catalogue