Micro ATX Cases
Model 359 All Metal Micro ATX Case
- Motherboard SupportM-ATX, ITX
- Max GPU Length185mm
- Case SizeL355*W175*H365mm
Micro ATX Cases · Model 358
Model 358 All Metal Micro ATX Case
Model 358 All Metal Micro ATX Case is a Micro ATX tower case built on a 0.35mm SGCC chassis with an ABS front panel and steel panels on both sides.
- Motherboard SupportM-ATX, ITX
- Max GPU Length185mm
- Max CPU Cooler Height165mm
- Case SizeL355*W175*H365mm
Product Overview
What This Model Is and What It Takes
Model 358 All Metal Micro ATX Case is a Micro ATX tower case built on a 0.35mm SGCC chassis with an ABS front panel and steel panels on both sides. The assembled case measures L355*W175*H365mm, each unit ships in a L400*W210*H4055mm carton, at 3.5Kg & 2.5Kg gross and net. The chassis takes boards in M-ATX, ITX format, graphics cards up to 185mm, CPU coolers up to 165mm and power supplies up to 140mm.
Technical Features
- Motherboard support: M-ATX, ITX
- Power supply form factor: Standard ATX
- Front I/O: 2*USB1.0, HD Audio
- Expansion slots: 4pcs
- Fan support: Rear:1*8cm
- Airflow design: Air channels(front, side, rear)
Key Benefits
The Figures That Decide Whether This Model Fits Your Build
- Graphics card clearance is published at 185mm, so the card on your build list is confirmed before the purchase order
- CPU cooler height clearance of 165mm is stated rather than left to be discovered on the assembly line
- Panel steel is specified as 0.35mm SGCC, which is the figure held from sample through to bulk production
- The front panel carries 2*USB1.0, HD Audio, so the motherboard header set can be matched in advance
- Fan mounting is laid out as Rear:1*8cm, giving a defined airflow plan instead of a generic claim
- Carton size L400*W210*H4055mm at 3.5Kg & 2.5Kg lets you calculate container loading and freight cost directly
Who It Is For
Buyers This Model Is Specified By
- Desktop system integrators building to a fixed bill of materials
- PC brands that need an OEM chassis without funding a full tooling programme
- Distributors stocking barebone chassis for local assemblers
- Internet cafe and esports venue operators refreshing a floor of machines
- Chassis arriving with a different steel gauge than the sample, so the panels flex on the shelf
- Graphics cards that do not fit because the supplier never published a clearance figure
- Carton dimensions changing between orders and wrecking a container loading plan
- Front I/O port sets that do not match the motherboard already bought
Application Scenarios
Where This Model Is Used
Office desktop fleets built to a standard board and drive configuration
Esports and gaming cafe machines running long daily hours
Education laboratory desktops that get moved and re-cabled often
Retail boxed PC programmes sold under the buyer's own brand
Specifications
Full Factory Specification Table
Reproduced from the factory specification sheet for this model. Figures the factory does not publish are left out rather than estimated.
| Motherboard Support | M-ATX, ITX |
|---|---|
| PSU Form Factor | Standard ATX |
| Structure Size | L325*W175*H365mm |
| Case Size | L355*W175*H365mm |
| Carton Size | L400*W210*H4055mm |
| Gross / Net Weight | 3.5Kg & 2.5Kg |
| Front Panel Material | ABS |
| Steel Thickness and Grade | 0.35mm SGCC |
| Side Panel Material | Both metal panel |
| Packing | A=B & Foam |
| Front I/O Ports | 2*USB1.0, HD Audio |
| Expansion Slots | 4pcs |
| 5.25 inch Bays | 3 |
| 3.5 inch Bays | 4 |
| 2.5 inch Bays | 1 |
| Fan Support | Rear:1*8cm |
| Airflow Design | Air channels(front, side, rear) |
| Max CPU Cooler Height | 165mm |
| Max PSU Length | 140mm |
| Max GPU Length | 185mm |
Materials
- Front panel: ABS
- Chassis steel: 0.35mm SGCC
- Side panels: Both metal panel
Certifications
- CE EMC certificate held for the computer case line
- CE LVD certificate held for the computer case line
- Produced in ISO 9001:2000 and ISO 14001:2004 certified joint venture plants
Manufacturing Process
How This Model Is Made
- Step 01
Steel coil cut to size and stamped on ...
Steel coil cut to size and stamped on the press line
- Step 02
Chassis panels formed, punched and spo...
Chassis panels formed, punched and spot welded
- Step 03
Surface coating applied to the specifi...
Surface coating applied to the specified finish
- Step 04
Front panel and plastic parts moulded ...
Front panel and plastic parts moulded and trimmed
- Step 05
Chassis assembled, fitted out and func...
Chassis assembled, fitted out and function checked
- Step 06
Packed as A=B & Foam into a L400*W210*...
Packed as A=B & Foam into a L400*W210*H4055mm carton
Quality Control
What Is Checked and When
- Incoming steel and plastic checked against the recorded grade before production
- In-process checks on stamping, welding and surface finish at the line
- Assembled unit function checked before packing
- Packed carton verified against the recorded packing specification and carton size
- QC officers carry out inspection before shipment as stated by the factory
Customisation Options
What Can Be Changed on This Model
- Front bezel and I/O cut-out changes handled as an in-house tooling item
- Chassis and panel colour changed against an approved sample
- Logo printing on the bezel and on the colour box
- Packing changed between assembled and barebone CKD where the design allows
- Fan and lighting configuration specified at order stage
Comparison
How This Compares With the Alternatives
| A chassis bought without published clearance figures | This model states 185mm of card clearance and 165mm of cooler clearance, so the build list is confirmed before the order rather than on the assembly line. |
|---|---|
| A generic import with no stated steel grade | Panel steel is named as 0.35mm SGCC and recorded on the sample sheet, which is what stops the gauge drifting on the repeat order. |
| An all-in-one or proprietary enclosure | Standard ATX-family components stay field replaceable, so servicing does not depend on one supplier's spare parts. |
Use Guide
Checks to Run Before You Place the Order
- Check your graphics card length against the published 185mm, measuring from the mounting bracket to the far end of the shroud
- Check the assembled height of your CPU cooler against 165mm including the fan clip
- Confirm the power supply fits within 140mm and leave room for the cable exit behind it
- Match your motherboard header set to the front panel ports: 2*USB1.0, HD Audio
- Plan the fan population from the supported positions: Rear:1*8cm
- Use the carton figure L400*W210*H4055mm at 3.5Kg & 2.5Kg for your container load plan
Model 358 All Metal Micro ATX Case Questions
What is the maximum graphics card length in Model 358 All Metal Micro ATX Case?
The published clearance is 185mm. Measure your card from the bracket to the end of the shroud, including any power connector that exits the end rather than the top.
Will a tower air cooler fit?
Cooler height clearance is 165mm. Compare that against the total height of the cooler including the fan clip, not the heatsink alone.
Which motherboard sizes does this case take?
It is drilled for M-ATX, ITX. Standoffs for the smaller formats are part of the same tray.
What are the carton dimensions for freight calculation?
One unit packs into a L400*W210*H4055mm carton at 3.5Kg & 2.5Kg. Send us your destination port on WhatsApp and we will confirm how many pieces fit a 20ft or 40ft container.
Can the front panel be changed for our own brand?
Yes. Die and mould work runs inside the group, so a revised bezel, a different I/O cut-out or a printed logo is handled as a tooling item rather than outsourced. Send the drawing or a photo of the reference part and we will quote the tooling separately from the unit price.
What is the minimum order quantity and lead time?
Both depend on the colour, the packing option and whether tooling is involved, so we confirm them per order rather than publishing one figure. Message us the model number 358 and your target quantity and you will get both in writing.
Related Products
Other Models in Micro ATX Cases
Micro ATX Cases
Model 357 All Metal Micro ATX Case
- Motherboard SupportM-ATX, ITX
- Max GPU Length185mm
- Case SizeL355*W175*H365mm
Micro ATX Cases
Model 355 All Metal Micro ATX Case
- Motherboard SupportM-ATX, ITX
- Max GPU Length185mm
- Case SizeL355*W175*H365mm
Micro ATX Cases
Model 541 All Metal Micro ATX Case
- Motherboard SupportM-ATX, ITX
- Max GPU Length260mm
- Case SizeL305*W170*H340mm (with feet)
Related Industries and Solutions
Where This Model Fits a Wider Programme
Desktop System Integrators
Chassis, power and cooling that arrive to the same specification every time
PC Brands and OEM Programmes
Your own front panel and your own box without funding an outside tool shop
Education and Government Tenders
Cost sheets that hold and specifications you can put in a bid document
OEM and ODM Case Development
From a reference photo to a tooled chassis in your own carton
CKD Packing and Container Planning
Ship volume, not air, and assemble after arrival
Related Guides
Reading That Helps You Specify This Model
ATX vs Micro ATX vs Slim Case Form Factors Explained for Buyers
How chassis form factor decides board fit, card clearance, carton volume and freight cost, with the clearance figures pu
SPCC vs SGCC Steel and Why Chassis Gauge Matters to Your Cost Sheet
What the steel grade and thickness on a chassis specification mean in practice, and why a tenth of a millimetre changes
Get a Quotation on Model 358 All Metal Micro ATX Case
Send your target quantity and destination port. You will get unit price, MOQ, lead time and how many pieces fit a container, calculated from the published carton data.