Gaming Cases
Model 8510 Tempered Glass Micro ATX Gaming Case
- Motherboard SupportE-ATX, ATX, M-ATX, ITX
- Max GPU Length330mm
- Case SizeL365*W210*H422mm (with feet)
Solution
Private Label and Packaging Programme
Your brand on the chassis, the supply, the box and the manual
A private-label programme fails on the parts nobody scoped: the manual, the carton marking, the label on the power supply. Handling all of it inside one supplier is what keeps the ship date.
Process
Eight Stages From Enquiry to Container
Each stage exists because something specific goes wrong without it.
- Step 01
Requirement
We list every printed and marked surface at the start so nothing appears late.
- Step 02
Design
Artwork is checked against the actual print area of each part before approval.
- Step 03
Prototyping
A printed sample of each item is produced for physical approval.
- Step 04
Material selection
Board grade and print method are recorded with the approved sample.
- Step 05
Production
Printing is scheduled alongside chassis production, not after it.
- Step 06
Quality control
Printed items are checked against the approved sample before packing starts.
- Step 07
Packing
The complete kit is packed and sealed as one retail-ready unit.
- Step 08
Logistics
Outer marking is prepared to match your retail and customs requirements.
Stage by Stage
The Problem Each Stage Exists to Solve
| Requirement | Problem. Branding scoped as a logo turns into six separate print items. How we handle it. We list every printed and marked surface at the start so nothing appears late. |
|---|---|
| Design | Problem. Print area on a bezel or a supply label is smaller than the artwork assumes. How we handle it. Artwork is checked against the actual print area of each part before approval. |
| Prototyping | Problem. Colour on screen is not colour on steel or on cardboard. How we handle it. A printed sample of each item is produced for physical approval. |
| Material selection | Problem. Carton board downgraded after approval shows up as crushed boxes. How we handle it. Board grade and print method are recorded with the approved sample. |
| Production | Problem. Print runs scheduled after the chassis run always arrive last. How we handle it. Printing is scheduled alongside chassis production, not after it. |
| Quality control | Problem. A misprinted carton cannot be sold and cannot be returned. How we handle it. Printed items are checked against the approved sample before packing starts. |
| Packing | Problem. Chassis, supply, manual and accessories have to end up in one sealed box. How we handle it. The complete kit is packed and sealed as one retail-ready unit. |
| Logistics | Problem. Retail-ready cartons have different marking requirements to bulk cartons. How we handle it. Outer marking is prepared to match your retail and customs requirements. |
Product Ranges
What This Programme Covers
Models
Typical Starting Points
Gaming Cases
Model U02 Tempered Glass ATX Gaming Case
- Motherboard SupportATX, M-ATX, ITX
- Max GPU Length430mm G.W / N.W 8.3kg / 7.1kg Q’ty in 40HQ 800Pcs
- Case SizeL434*W245*H473mm (with panel &feet)
Gaming Cases
Model 8508 Tempered Glass Micro ATX Gaming Case
- Motherboard SupportE-ATX, ATX, M-ATX, ITX
- Max GPU Length330mm
- Case SizeL365*W210*H422mm (with feet)
Special Shaped Cases
Model 1617 Micro ATX Special Shaped Gaming Case
- Motherboard SupportM-ATX
- Max GPU Length325mm
- Case SizeL450*W315*H350mm
Special Shaped Cases
Model 1613 ATX Special Shaped Gaming Case
- Motherboard SupportATX, M-ATX
- Max GPU Length320mm
- Case SizeL520*W225*H495mm
Special Shaped Cases
Model 1612 Micro ATX Special Shaped Gaming Case
- Motherboard SupportM-ATX
- Max GPU Length310mm
- Case SizeL580*W225*H450mm
80 PLUS Power Supplies
ATX 300W 350W 400W 80 PLUS Computer Power Supply
- Rated Power300W
- Output Rails+3.3V +5V +12V1 +12V2 -12V +5VSB
- Dimensions150x86x140mm (WxHxL), 12cm Fan
80 PLUS Power Supplies
ATX 450W 500W 550W 600W 80 PLUS Computer Power Supply
- Rated Power450W
- Output Rails+3.3V +5V +12V1 +12V2 -12V +5VSB
- Dimensions150x86x160mm (WxHxL), 14cm Fan
Industries
Who Uses This Programme
Related Guides
Background Reading
How to Read a Computer Power Supply Datasheet Before You Buy in Bulk
Rated versus peak wattage, per-rail load limits, ripple and regulation figures, and the questions that separate a real d
SPCC vs SGCC Steel and Why Chassis Gauge Matters to Your Cost Sheet
What the steel grade and thickness on a chassis specification mean in practice, and why a tenth of a millimetre changes
Tempered Glass vs Mesh Front Panels for Gaming Chassis Programmes
The trade-off between a glass front that sells on a shelf and a mesh front that moves air, and how packing and breakage
Private Label and Packaging Programme Questions
How does a private label and packaging programme project start?
With a written brief rather than a form. Send the model numbers, quantities, destination and any artwork or drawing over WhatsApp or e-mail and we will respond with the first stage of the plan set out on this page.
Who do we deal with during the project?
The same sales engineer from quotation through to shipment, so the specification recorded at sample stage is held by the person managing the production.
What is confirmed in writing?
Steel grade and thickness, panel materials, colour reference, packing method, carton dimensions and gross weight. Those are the items that drift if they are not recorded.
Start a Private Label and Packaging Programme Project
Send the model numbers, quantities, destination and any artwork or drawing. You will get the first stage back in writing, not a form acknowledgement.