Lighting for the Machines That Keep Working After Dark
SUNLITEC builds auxiliary lighting for off-road vehicles, trucks, excavators, cranes, forklifts, mining machinery, tractors and boats. Every range below is in production now, with the beam pattern, sealing rating and voltage window published on each model page.
LED Work Lights
High output LED work lights for heavy machinery and vehicles that need reliable illumination in harsh environments where
88 models
LED Driving Lights
LED driving lights for off-road vehicles and heavy machinery that need a reliable, high-output beam pattern to improve v
29 models
LED Light Bars
Durable LED light bars for off-road vehicles cranes excavators forklifts and engineering vehicles that need consistent,
14 models
LED Laser Driving Lights
High intensity LED laser driving lights for off-road vehicles and heavy machinery that need a focused beam to illuminate
7 models
LED Search Lights
High output remote controlled and fixed search lights for boats service trucks and rescue vehicles that need to put a us
7 models
Forklift Safety Lights
Forklift safety lights with IP68 sealed housings and 9 to 80V input range for use on industrial vehicles that operate in
7 modelsModels Buyers Ask For Most Often
A cross section of the range. Each page carries the original specification data, the beam pattern and the packing details where the factory sheet provides them.
4 Inch 27W Hot Sale Square LED Work Light
View specification
4 Inch 27W Hot Sale Round LED Work Ligh
View specification
5 Inch 27W Square LED Work Light
View specification
7 Inch CREE 10W High Power Driving Light
View specification
9 Inch 120W LED Driving Light Spot Beam
View specification
9 Inch 225W High Power LED Driving Light Spot
View specification
Offroad CREE LED Light Bar
View specification
Offroad CREE LED Light Bar EMC CISPR 25 CLASS 4
View specification
Offroad Utility CREE LED Light Bar
View specification
Green Laser Adjustable Flashlight for Lighting Hunting. LT-F02
View specification
14 Inch 20 Inch 30 Inch 42 Inch 50 Inch Osram LED Single Row Laser Light Bar SLL-LB1450S
View specification
60mm 10W Laser LED Torch Light 500LM 1LUX@927M SLL-19001B
View specification
90W Wireless Handheld Remote Control Search Light 370°Rotation X 135°Tilt
View specification
11 Inch 60W Remote Control LED Search Light SLL-CH078-60W
View specification
7 Inch High/low Version LED Search Light SLL-CH001B-60W
View specification
Forklift Blue Safety Lights
View specificationMachines We Light Every Day
The About page of this factory lists the machines the range was built for. Each of those groups has its own lighting problem, and the pages below start from that problem rather than from the catalogue.
Most Lighting Complaints Come From Four Places
- Water gets in through the cable entry, the lens fogs and the lamp is scrap after a season of pressure washing
- Halogen lamps fail under mast and chassis vibration and pull current a small alternator cannot spare
- A flood lamp is fitted where a spot was needed, so the operator gets a bright patch and a dark working edge
- Uncertified auxiliary lighting fails an EMC or road inspection on machines that also use public roads
- Sealed housings rated IP67 IP68 or IP69 depending on model, with the rating printed on every product page
- Die-cast aluminium bodies, PC lenses and stainless brackets tested on a vibration rig and in a salt spray chamber
- Beam pattern stated for every model so flood spot combo and driving optics can be matched to the job
- EMC and ECE R10 approvals listed where a model carries them, so the specification can be checked before purchase
Numbers a Buyer Can Check
Testing Done in House
- Integrating sphere
- Vibration test machine
- Salt spray corrosion testing chamber
- High and low temperature alternating hot and humid testing chamber
Commercial Terms Published by the Factory
- Sample orders welcome, mixed samples acceptable
- Sample orders normally 3-7 working days; bulk lead time depends on item and quantity
- MOQ applies to standard orders but small orders are also accepted
- Samples ship by DHL UPS FedEx or TNT in about 4-7 days; bulk by air about 7-15 days or by sea about 15-30 days
- OEM and ODM service available
How a Lighting Programme Usually Runs
Four routes through the same factory, depending on whether you are specifying for one machine, standardising a mixed fleet, or building a private label range.
Technical Guides for Buyers and Fitters
Questions Buyers Ask Before the First Order
What does SUNLITEC actually manufacture
Vehicle LED lighting: work lights, driving lights, light bars, laser driving lights, search lights, forklift safety lights and the brackets that mount them. The site lists more than 30 series and 200 models.
Can I order samples before a bulk order
Yes. Sample orders are welcome and mixed samples of several models can travel in one parcel, normally despatched in 3 to 7 working days.
Do you supply under our own brand
Yes. OEM and ODM service covers a private label logo on the housing and printed cartons.
Which certifications do the products hold
The company is certified to the ISO 9001 quality management system and products are CE and RoHS compliant. Individual models list further approvals such as EMC and ECE R10 on their own pages.
How long does shipping take
Samples usually go by DHL, UPS, FedEx or TNT in about 4 to 7 days. Bulk orders ship by air in about 7 to 15 days or by sea in about 15 to 30 days.
Which voltage systems are supported
Most lamps state a 9 to 32V or 10 to 30V input so one part number covers 12V and 24V machines. Forklift models extend to 48V and 80V systems.
Send Us the Machine and the Job
Tell us the machine, the voltage system and the area that has to be lit. You will get a model shortlist with beam pattern, sealing rating and packing data.



