Vehicle LED lighting factory in Foshan China since 2010 [email protected] WhatsApp +86 188 2665 4156
Front view of the driving light with the polycarbonate lens and no visible bezel

LED Lighting for Off Road and 4x4 Vehicles

Off road and 4x4 vehicles operate in environments where visibility is limited by terrain, weather, and darkness. SUNLITEC has manufactured LED lighting in Foshan since 2010, and the off-road range includes work lights, driving lights, and light bars designed f

Talk To An Engineer See the models
Context

What This Application Demands

Off road and 4x4 vehicles operate in environments where visibility is limited by terrain, weather, and darkness. SUNLITEC has manufactured LED lighting in Foshan since 2010, and the off-road range includes work lights, driving lights, and light bars designed for rugged use on full size SUVs and off-road vehicles. The lamps are sealed and vibration tested because constant movement and exposure to dust, water, and temperature extremes can degrade performance and reliability over time.

Pain Points

Where Lighting Fails on These Machines

  • Drivers lose visibility in deep mud, sand, or snow where standard headlights fail
  • Standard lights fail to illuminate the full width of a trail or the ground ahead of a tire
  • Vibration from rough terrain loosens fittings and damages internal connections
  • Water and dust enter unsealed housings during river crossings or heavy rain
  • Fleet operators must manage multiple light models due to voltage differences between vehicles
Requirements

What the Specification Has to Cover

  • Wide beam patterns such as flood or combo to illuminate the full trail width
  • Sealed housings with IP68 or IP69 ratings to resist water, dust, and mud ingress
  • Vibration-tested mounting systems that hold alignment under continuous off-road use
  • A supplier who maintains consistent product specifications across multiple reorders
Application Scenarios

Typical Fitting Positions

  • Driving through a forest trail at night with a combo beam lighting both the path and the sides
  • Using a flood beam to illuminate the ground in front of a tire during a rock crawl
  • Mounting a spot beam on a full size SUV for long-range visibility on unlit roads
  • Fitting a light bar with IP69 rating to survive river crossings and high-pressure washdown
  • Using a 9–32V input light bar on a 24V off-road truck without needing a voltage regulator
How It Runs

From First Enquiry to Fitted Machines

Step 1

Confirm the vehicle’s electrical system voltage and available mounting locations

Step 2

Select a beam pattern and power level that matches the intended use—driving, work, or fog

Step 3

Request mixed samples to test fit and performance before placing a bulk order

Step 4

Agree on packaging and labelling for fleet deployment or retail distribution

Supply

Delivery and Commercial Terms

  • Sample orders normally ship in 3 to 7 working days via DHL UPS FedEx or TNT
  • Bulk orders ship by air in about 7 to 15 days or by sea in about 15 to 30 days
  • MOQ applies to standard orders, but small trial orders are accepted
  • OEM and ODM service is available for private label housings and carton printing
  • Exported to more than 80 countries and regions since the company was founded in 2010
Shortlist

Models Suited to These Machines

SUNLITEC SLL-7090 7 inch high power driving light with square die-cast aluminium housing and top mount bracket Driving Lights 7 Inch CREE 10W High Power Driving Light View specification SUNLITEC SLL-9121 9 inch LED driving light with 10 degree spot beam and die-cast aluminium housing Driving Lights 9 Inch 120W LED Driving Light Spot Beam View specification SUNLITEC SLL-9225 9 inch high power LED driving light spot with die-cast aluminium housing and polycarbonate lens Driving Lights 9 Inch 225W High Power LED Driving Light Spot View specification SUNLITEC SLL-7105 7 inch spot beam LED driving light with stainless steel bracket and die-cast aluminium housing Driving Lights 7 Inch 105W 8 400 LM 6000K View specification SUNLITEC SLL-0702-12-M 3 inch round LED work light with stainless steel bracket and die-cast aluminium housing Work Lights Real Work LED Lights View specification SUNLITEC SLL-0702-16-M 3.5 inch round LED flood work light with stainless steel bracket Work Lights Best LED Work Lights View specification SUNLITEC SLL-0702-24-M 4 inch round LED work light with die-cast aluminium housing and polycarbonate lens Driving Lights LED Light for Work View specification SUNLITEC SLL-0801-10 2 inch square off-road LED light with 360-degree adjustable mount Driving Lights 2 Inch Off-Road LED Lights View specification
Ranges

Product Ranges Behind This Shortlist

29 modelsLED Driving LightsOpen range7 modelsLED Laser Driving LightsOpen range14 modelsLED Light BarsOpen range22 modelsNew Driving LightsOpen range
Buyer Questions

Off Road and 4x4 Vehicles Lighting Questions

Are the lights sealed for river crossings

Yes. Models with IP68 and IP69 ratings are designed for full immersion and high-pressure washdown, suitable for river crossings and off-road use.

Can we trial a small quantity first

Yes. Sample orders are welcome, and mixed samples of different models are accepted in one shipment.

Do you supply mounting brackets

Brackets are listed as a separate range on the site. Some models include a bracket, as stated on the product page.

How quickly can a repeat order ship

Bulk lead time depends on model and quantity. Air freight normally runs 7 to 15 days and sea freight 15 to 30 days once the order is produced.

Can the lights carry our own brand

Yes. OEM and ODM service is available, including private label logos on the housing and carton.

Specify Lighting for Off Road and 4x4 Vehicles

Send the machine list and the voltage systems in the fleet. You will get a shortlist, packing data and a quotation.

Chat on WhatsApp Email UsAll models