7 Inch High/low Version LED Search Light SLL-CH001B-60W
The SLL-CH001B-60W is a 7 inch high/low version LED search light designed for vehicles and machinery that operate in low visibility conditions, including night driving, off-road work, and emergency response. Twelve 5W high intensity LEDs deliver 4800 effective lumens with a 30 degree spot beam, projecting a focused light beam up to 1000 meters to illuminate distant terrain or obstacles. The die-cast aluminium housing is sealed to IP65 and rated for over 30000 hours, making it suitable for continuous use on cranes, excavators, and emergency vehicles where reliability under vibration and dust is critical.
- 12 x 5W high intensity LEDs produce 4800 effective lumens with a 30 degree spot beam for long-range visibility
- IP65 sealing protects against dust and water jets, suitable for outdoor and industrial environments
- 30000 hours lifetime reduces replacement frequency on machines that operate continuously
- 12/24V DC operation allows one part number to serve both 12V and 24V vehicle systems
- Die-cast aluminium housing resists deformation under vibration and dissipates heat efficiently
Where This Lamp Is Used
- Emergency vehicle lighting during night patrols and rescue operations
- Off-road vehicle navigation in remote terrain with no street lighting
- Crane and excavator operation at dusk or in tunnels with poor ambient light
- Forklift and mining vehicle lighting in underground or enclosed work zones
- Truck and bus lighting for night freight transport on unlit roads
Who It Is For
- Fleet operators needing a single search light model for both 12V and 24V trucks and buses
- Machinery OEMs integrating search lights into production line builds for cranes and excavators
- Emergency service suppliers fitting reliable lighting on response vehicles with minimal downtime
- Distributors stocking a high-lumen search light with a long service life for industrial buyers
- 4x4 accessory brands building a private label search light line with consistent performance
Problems It Solves
- Halogen search lights fail quickly under vibration and draw excessive current from vehicle electrical systems
- Cheap plastic housings crack or degrade under UV exposure and high heat during extended use
- Narrow beam lights leave large areas in shadow, while wide beams lack reach for distant object detection
- Lights without proper sealing allow water ingress during pressure washing or rain exposure
- Short lifetime bulbs require frequent replacement, increasing maintenance cost and downtime
Technical Features
- Twelve 5W high intensity LEDs with a total real power draw of 60W and 4800 effective lumens
- 30 degree spot beam pattern with a focused light cone for long-range visibility
- Semi-gloss black or white powder coated housing with a die-cast aluminium body
- Operating voltage range of 12 to 24V DC, compatible with both 12V and 24V vehicle systems
- Rated for over 30000 hours of continuous operation under normal conditions
- Sealed cable entry gland and rubber gasket to maintain IP65 rating during operation
Technical Specification
Values taken from the original factory specification for this model. Fields the factory sheet does not state are left out rather than estimated.
| Part Number | SLL-CH001B 60W |
|---|---|
| Max Power | 60W |
| Real Power | 60W |
| LED | 12 pcs x 5W high intensity |
| Theoretical Lumen | 4800 lm |
| Effective Lumen | 4800 lm |
| Beam Pattern | Spot |
| Beam Angle | 30 degrees |
| Colour Temperature | 6000K |
| Operating Voltage | 12/24V DC |
| Housing Material | Die-cast aluminium |
| Lens Material | Polycarbonate |
| Bracket Material | Die-cast aluminium |
| Waterproof Rating | IP65 |
| Lifetime | More than 30000 hours |
| Size | 7 inch diameter |
| Certification | CE, RoHS |
Materials Used
- Anti-UV and impact-resistant polycarbonate lens
- Silicone rubber gasket and sealed cable entry gland
- Semi-gloss black or white powder coating
- Die-cast aluminium mounting bracket
How This Lamp Is Built
Die casting of the aluminium housing and heat sink
Powder coating in black or white
LED board assembly with 12 high intensity 5W LEDs
Lens bonding and gasket sealing
Quality Control on This Model
- Photometric output verified in an integrating sphere
- Sealing verified against the IP65 rating before shipment
- Vibration testing on a vibration test machine to simulate machine-mounted service
- Salt spray corrosion testing on housing coating and bracket
Customisation Options
- Alternative colour finish (black or white) on request
- Private label logo on the housing and printed carton
- Custom cable length to match specific machine harnesses
- Mixed cartons combining this search light with other SUNLITEC models for trial orders
How It Compares With the Alternatives
| Halogen search light of similar output | Draws 5A at 12V against roughly double that for halogen and survives vibration that destroys a filament |
|---|---|
| Round 7 inch search light | The same diameter body allows a flat mounting surface but requires a compatible bracket pattern |
| Wider beam version of the same lamp | Spot beam reaches further ahead but leaves the immediate area darker, ideal for long-range scanning |
| Larger 9 inch search light | Higher output but requires more space and may not fit on compact vehicle mounts |
How to Fit and Use It
- Aim the 30 degree spot beam at distant obstacles or terrain features and use additional flood lights for near-field illumination
- Clean the PC lens with water and a soft cloth only, as solvents may damage the anti-UV coating
Questions About This Model
Can I order a sample before placing a bulk order
Yes. Sample orders are welcome and mixed samples of different models in one shipment are accepted.
What is the lead time
Sample orders normally take around 3 to 7 working days. Bulk lead time depends on the model and the quantity ordered.
Do you have a minimum order quantity
There is an MOQ for standard orders, but smaller orders are also accepted, which suits distributors testing a new model.
How is the lamp shipped
Samples usually go by DHL, UPS, FedEx or TNT in around 4 to 7 days. Bulk orders ship by air in about 7 to 15 days or by sea in about 15 to 30 days.
Will this lamp work on both 12V and 24V machines
Yes. The operating range is 12 to 24V DC, so the same part number can be fitted to both 12V and 24V vehicles.
Can you supply the lamp with our own brand
Yes. OEM and ODM service is available, including a private label logo on the housing and printed cartons.
Is it approved for road going machines
The lamp is CE and RoHS compliant, and carries IP65 sealing, which meets requirements for outdoor and industrial vehicle use.
Models Often Compared With This One
90W Wireless Handheld Remote Control Search Light 370°Rotation X 135°Tilt
View specification
11 Inch 60W Remote Control LED Search Light SLL-CH078-60W
View specification
7 Inch 60W Low Version Remote Control LED Search Light SLL-CH015-60W
View specification
7 Inch Low Version Remote Control LED Search Light 50W SLL-CH015-50W
View specificationGet a Price on 7 Inch High/low Version LED Search Light SLL-CH0
Send the quantity, the destination port and any branding requirement. You will get pricing, packing data and the production lead time.