Automotive and Motorcycle
Gears, bearings, springs and cast housings on the same line, each needing a different alloy of media.
Pain Points On This Line
- Peened springs and gears must reach a repeatable Almen intensity, which needs uniform grain size and hardness
- Aluminium housings blasted with steel media pick up iron and rust before assembly
- Media consumption per shift drives the running cost of the blast wheel
What Buyers Ask For
- A round conditioned grain for peening and an as-cut grain for cleaning
- Stainless or aluminium media for non-ferrous housings
- Consistent chemistry batch to batch
Recommended Products
Carbon steel
Carbon Steel Cut Wire Shot Conditioned
New steel wire and spring wire, 0.2 mm to 2.5 mm, rounded
Stainless steel
Stainless Steel Shot Conditioned
SUS304 / 302 / 202 / 201 / 430 / 410, 0.2 mm to 2.5 mm, 300-600 HV
Aluminum
Aluminum Round Shot
A1070 / A1050 / 5056 / 1100, 0.6 mm to 3.5 mm, 65-125 HV
Steel balls
Low Carbon Steel Balls
AISI 1015 / 1010 / Q235, G10 to G1000, 0.5 mm to 30 mm, 55-62 HRCHow An Enquiry Runs
From the first message to the pallet leaving Yongkang.
Frequently Asked Questions
Which media do you recommend for automotive and motorcycle
The products listed on this page cover the substrates and processes named above. Send the part material, the current media and the finish you need and we will confirm the alloy, shape and grain size.
What volumes do you supply
Supply ability is 500,000 kg per month across most ranges and 1,000,000 kg on the stainless steel shot lines. Minimum order is 500 kg on most ranges and 1,000 kg on carbon steel cut wire shot.
Do you deliver to our country
Products are exported to more than 50 countries including Germany, Japan, the United States, Singapore, Malaysia, Thailand, Vietnam, South Korea, Colombia, Argentina and Indonesia. Send your destination port for a quote.
Can we trial the media before switching over
Yes. The minimum order is set low so a trial batch can be run on your own parts before a volume commitment.
Talk To Us About Automotive and Motorcycle
Send the part material, the current media and the finish you have to hand over.
Minimum order from 500 kg. Packed 25 kg per bag, 40 bags per pallet. Quotes in USD, terms T/T.