Decorative LED Lighting Built In Our Own Zhongshan Factory
Chandeliers pendants ceiling floor table and IP54 wall lights in high purity aluminium, 20 days or less in production
Decorative LED Lighting Made In One Factory
SFD Lighting builds decorative LED fixtures in high purity aluminium: chandeliers and pendant lights, ceiling lights, floor lights, table lights and IP54 wall lights. Every fixture in this catalogue is made in our own factory in Zhongshan, from the aluminium extrusion and the sprayed finish through to the LED board, the driver and the export carton.
Wholesalers Contractors And Hospitality Buyers
We supply lighting wholesalers, project contractors, hotel and hospitality buyers, and interior fit-out companies. Our fixtures have gone into chandelier and pendant projects in France, Dubai, India, Spain, Belgium, Bangladesh and Australia, and the company sells into more than 50 countries and regions.
Five Ranges Built Around Where The Light Has To Go
Every model below is made in our own factory, with the LED type and the driver brand stated on the product page.
3 modelsCeiling LightsSurface mounted decorative LED ceiling lights in high purity aluminium, 15 W to 40 W.Browse the range
10 modelsChandeliers and Pendant LightsRing, linear and multi-ring LED pendants from 400 mm to 1270 mm, 18 W to 75 W.Browse the range
3 modelsFloor LightsUpright and arc LED floor lights from 1300 mm to 2000 mm, 5 W to 80 W.Browse the range
1 modelsTable LightsWeighted decorative LED table lights for bedside and reception surfaces.Browse the range
1 modelsWall LightsIP54 rated aluminium LED wall lights in three lengths, 8 W to 24 W.Browse the rangeAll 18 Models In Production Today
Nothing here is a render. Each photograph is of the fixture as it ships.
Ceiling LightsHigh Purity Alu Ceiling Light SX2344-ACrossed-bar aluminium ceiling light, 680 x 480 mm, 20 W, sand black and goldView specification
Chandeliers and Pendant LightsHigh Purity Alu Pendant Light SD2343-M1270 mm linear wave pendant, 50 mm wide, 18 W, sand black and greyView specification
Chandeliers and Pendant LightsHigh Purity Alu Pendant Light SD2342-2RM600 mm double ring pendant, 45 W, sand black, 1500 mm dropView specification
Chandeliers and Pendant LightsHigh Purity Alu Ceiling Light SX2342-2RS400 mm surface ring ceiling light, 220 mm deep, 30 W, sand blackView specification
Chandeliers and Pendant LightsHigh Purity Alu Pendant Light SD2341-2RM800 mm and 600 mm stepped double ring pendant, 75 W, grey and goldView specification
Chandeliers and Pendant LightsHigh Purity Alu Pendant Light SD2341-1RM600 mm single ring pendant, 30 W, grey and gold, 1500 mm dropView specification
Chandeliers and Pendant LightsHigh Purity Alu Pendant Light SD2169-A1200 mm straight linear pendant, 120 mm wide, 34 W, sand blackView specification
Floor LightsSimple Floor Light SL2243-5CFive-arm arc floor light, 2000 mm high, chrome, 80 WView specification
Chandeliers and Pendant LightsHigh Purity Alu Pendant Light SD2237-RM600 mm matt gold ring pendant with acrylic diffuser, 36 W, drop 110 to 1500 mmView specificationTable LightsHigh Purity Alu Table Light ST2308-RS515 mm table light, matt white, Cree-class 5 W, 2.2 kgView specificationChandeliers and Pendant LightsHigh Purity Alu Pendant Light SD2126-CL1200 mm ring and bar pendant, matt white, 40 W, 2 kgView specification
Ceiling LightsHigh Purity Alu Ceiling Light SX2313-4C900 x 900 mm crossed-bar ceiling light, 40 W, matt white, 2 kgView specification
Chandeliers and Pendant LightsSD2313-4C Aluminium Acrylic Pendant Light900 x 900 mm crossed-bar pendant, 40 W, matt white, drop 200 to 1500 mmView specificationWall LightsHigh Purity Aluminium Wall Light SB2167 IP54IP54 aluminium wall light in three lengths, 8 W to 24 W, matt black matt white or goldView specification
Ceiling LightsHigh Purity Alu Ceiling Light SX2126-RS RM RLSlim 40 mm ceiling light in three sizes, 15 W to 30 W, matt black, matt white or rose goldView specification
Chandeliers and Pendant LightsUp and Down Pendant Light With Gesture Dimming SD2126-RS RM RLUp and down pendant in three sizes with gesture dimming, 25 W to 55 WView specification
Floor LightsGesture Dimming Floor Light SL2312-2C1365 mm upright floor light with top button dimming, Cree COB 10 W, 5 kgView specification
Floor LightsGesture Dimming Floor Light SL2312-1C1300 mm upright floor light with top button dimming, Cree COB 5 W, 3.1 kgView specificationFour Kinds Of Buyer With Four Different Problems
IndustryHotels and HospitalityFixtures bought from several suppliers never quite match in finishHow we serve it
IndustryResidential InteriorsCeiling heights vary room to room inside one apartmentHow we serve it
IndustryRetail and ShowroomsColour temperature differences across a long run change how stock looksHow we serve it
IndustryOffices and WorkspacesRecessed troffers look institutional in a designed workspaceHow we serve itWhere Decorative Lighting Orders Usually Go Wrong
Decorative lighting is where most import orders go wrong: finishes drift between batches, a ring arrives bent because the carton was never tested, a drop length turns out to be fixed when the ceiling height changed on site, and no one can tell you which driver is inside. We control the finish, the packing and the components in one factory, and we publish the driver brand and the wattage for every model.
- 1
The Finish Drifts Between Batches
Painted gold, rose gold and matt colours are sprayed, not plated. Two runs six weeks apart will not match. We spray a whole order in one batch wherever the schedule allows and we tell buyers to include their top-up quantity in the same run.
- 2
The Carton Was Never Tested
A 600 mm ring bends from a mid-span impact, not from an end drop. Every piece is packed singly and all our products can pass the standard of drop test, which is how the packing is verified before a run ships.
- 3
The Drop Length Is Wrong
Built ceilings move from drawing heights. Our suspensions come at 1500 mm to be cut on site, or cut at the factory when you send a measured height. SD2237-RM goes from 110 mm to 1500 mm on one part number.
- 4
Nobody Will Name The Driver
When a decorative fixture fails early it is usually the driver. We state the brand on every product page: Eaglerise, YSD, Waiberlon or Done brand, with Epistar SMD2835 or CREE sources.
A Factory That Can Change A Product Not Only Resell It
The team came out of established lighting manufacturers in Zhongshan and we run our own design and development department, so a model can be modified rather than only resold. Production time is 20 days or less on the models in this catalogue. Cartons are checked by drop test before a run ships.
- Own design and development department in the same building as production
- Team members came from established Zhongshan lighting manufacturers
- Export certificate held, with shipments to the United States, Russia and Europe
- Operating in more than 50 countries and regions
The Building The Benches And The Packing Line
These are photographs of our own plant in HengLan, Zhongshan, not stock images.
How We Work With Buyers
SolutionOEM and ODM Lighting DevelopmentWe run our own design and development department, so a model in this catalogue can be modified rather than only resold. This page walks through how a change request becomes a shipped product, and where each stage can go wrong.Read more
SolutionProject Lighting SupplyProject orders fail on coordination more often than on product. This is how we run a project order, from the fixture schedule through to a container that can be unpacked floor by floor.Read moreSolutionWholesale and Private LabelFor distributors the problem is rarely the first container. It is the second one, eighteen months later, when the finish has drifted, the driver has been swapped and the model code no longer means the same thing.Read moreProjects We Have Supplied
Case StudyChandelier Project in FranceThe fixture had to be read from the ground floor, from the stair itself and from the landing above, which rules out anything flat.Read moreCase StudyChandelier Project in DubaiA lobby ceiling of that size cannot be held by one fixture, so the installation had to be built from repeated elements that still read as one piece.Read more
Case StudyThree Metre Chandelier Project in BangladeshA three metre fixture is a transport and installation problem before it is a lighting problem.Read moreGuides For Lighting Buyers
Design GuideHow to Size a Pendant for a Stair VoidStair voids are where most pendant orders go wrong. The fixture is either lost in the space or hanging where someone will walk into it.Read more
Product GuideGesture Dimming Explained and Where It Is Worth UsingTwo families in this catalogue dim from the fixture itself rather than from the wall. This is what that changes on site, and where it is not worth paying for.Read moreBuying GuideWhy Driver Brand Matters in Decorative LightingWe publish the driver brand on every model: Eaglerise, YSD, Waiberlon or Done brand. Most decorative lighting catalogues do not, and there is a reason for that.Read moreQuestions We Are Asked Before A First Order
Where is SFD Lighting manufactured?
In our own factory at No.4 XinGui Street, WuSha Industrial District, HengLan, Zhongshan, Guangdong, China.
How long does production take?
20 days or less on the models in this catalogue. Transit time is separate and depends on the shipping mode you choose.
Which LED and driver brands do you use?
Epistar SMD2835 across most of the range, with Cree COB and CREE LED on the floor and wall lights. Drivers are Eaglerise, YSD, Waiberlon or Done brand, stated per model.
What colour temperatures are available?
3000K, 4000K and 6000K on every model. The board is built to the value you select, so state the split per line item at quotation stage.
Do you supply project quantities?
Yes. We have supplied chandelier and pendant projects in France, Dubai, India, Spain, Belgium, Bangladesh and Australia, and we sell into more than 50 countries and regions.
How are fixtures packed for export?
Every piece is packed singly, and all our products can pass the standard of drop test.
Can you make a model to our own design?
We run our own design and development department. Send the overall size, the required drop and the target wattage over WhatsApp and we confirm what is feasible.
Send Us Your Fixture Schedule
Give us quantities, finishes and colour temperatures and we come back with a line by line quotation.