Chandeliers and Pendant Lights
High Purity Alu Pendant Light SD2343-M
1270 mm linear wave pendant, 50 mm wide, 18 W, sand black and grey
Chandeliers and Pendant Lights
Product Overview
SD2343-M is a 1270 mm linear pendant whose aluminium body curves in a shallow wave rather than running straight. It is only 50 mm wide and draws 18 W, so it sits over a dining table or a reception desk without blocking sight lines. The diffuser is PC, the body is aluminium with an iron suspension, and the drop is adjustable up to 1500 mm.
| Material | Aluminum +Iron+ PC |
|---|---|
| Product Size | L 1270*W50*H1500mm |
| Available Colours | sand black +grey |
| LED Colour Temperature | 3000K/4000K/6000K |
| LED and Driver | Epistar SMD2835 Eaglerise driver 18W |
| Packaging | Single packaging per piece |
| Production Time | 20 days or less |
| Delivery Time | Based on the mode of shipping chosen |
Key Benefits
What You Get From This Model
- 50 mm width keeps the fixture visually light over a table where a wide shade would dominate
- 18 W over 1270 mm gives a soft continuous line rather than a hot spot
- Wave form reads as a designed object from the side, not as a plain batten
- PC diffuser is less brittle in transit than glass or acrylic on a long span
- 1500 mm drop covers both standard 2.7 m ceilings and double-height voids with a short cable
Problems It Solves
What It Fixes On Site
- Wide linear pendants block the view across a dining table
- Straight batten pendants look like office lighting in a residential room
- Long diffusers crack in transit when they are made from brittle material
Application Scenarios
Where This Model Is Installed
- Dining tables 1.2 m to 1.8 m long in apartments and villas
- Reception and hotel check-in desks
- Café counters and bar tops
- Console tables in entrance halls
Who It Is For
Buyers Who Specify It
- Interior designers specifying a linear pendant that is not a plain bar
- Hospitality contractors fitting reception counters
- Distributors adding a slim decorative linear pendant to their range
Technical Features
How It Is Built
- Overall 1270 x 50 mm body with 1500 mm suspension
- Aluminium body, iron suspension, PC diffuser
- Epistar SMD2835 with Eaglerise driver, 18 W
- Sand black and grey two-tone finish
Quality Control
What We Check Before It Ships
- Raw material selection checked before processing
- In process checks during assembly and wiring
- Every fixture powered and inspected before packing
- Packing verified by drop test before a run ships
Customisation Options
What Can Be Changed To Order
- Colour temperature selected per line item: 3000K, 4000K or 6000K
- Body colour sprayed to order outside the standard finishes
- Suspension drop cut at the factory when the measured ceiling height is supplied
- Private label cartons and labelling agreed at order stage
Certification documents beyond our export certificate are supplied on request against the destination market. We do not publish claims we cannot evidence.
Use Guide
Installing And Living With It
- Hang the fixture 700 to 800 mm above a dining table top so the diffuser stays out of sight lines
- Centre the 1270 mm body on the table, not on the room, if the two centres differ
- Shorten the suspension cable on site, the drop is adjustable up to 1500 mm
Comparison
How It Differs From The Alternatives
| Compared with | Difference |
|---|---|
| SD2169-A | Narrower 50 mm profile and a curved form, where SD2169-A is a 120 mm wide straight bar |
| SD2126-CL | Single wave line instead of a ring and bar combination, for tables where a ring is too wide |
Also Consider
Related Products
Chandeliers and Pendant LightsHigh Purity Alu Pendant Light SD2342-2RM600 mm double ring pendant, 45 W, sand black, 1500 mm dropView specification
Chandeliers and Pendant LightsHigh Purity Alu Ceiling Light SX2342-2RS400 mm surface ring ceiling light, 220 mm deep, 30 W, sand blackView specification
Chandeliers and Pendant LightsHigh Purity Alu Pendant Light SD2341-2RM800 mm and 600 mm stepped double ring pendant, 75 W, grey and goldView specificationCase Studies
Projects Using This Range
Case StudyChandelier Project in FranceThe fixture had to be read from the ground floor, from the stair itself and from the landing above, which rules out anything flat.Read more
Case StudyChandelier Project in DubaiA lobby ceiling of that size cannot be held by one fixture, so the installation had to be built from repeated elements that still read as one piece.Read more
Case StudyChandelier Project in IndiaThe room had a high ceiling and a wide seating group, so a single ring would have looked undersized.Read moreKnowledge Centre
Related Guides
Design GuideHow to Size a Pendant for a Stair VoidStair voids are where most pendant orders go wrong. The fixture is either lost in the space or hanging where someone will walk into it.Read more
Process GuidePacking and Drop Testing Lighting for ExportA fixture that is perfect when it leaves the line and bent when it arrives is a failed order. This is how our packing is built and checked.Read moreQuestions Buyers Ask
High Purity Alu Pendant Light SD2343-M Questions
How long is SD2343-M?
The body is 1270 mm long and 50 mm wide, with a suspension drop up to 1500 mm.
What is the diffuser made of?
PC, chosen because it survives long-span transit better than brittle materials.
Is 18 W enough over a dining table?
It is sized to light the table surface as a decorative line. Where a room needs general light as well, pair it with the SX2126 ceiling family.
What finishes are standard?
Sand black with grey.
Can the drop be shortened on site?
Yes, the suspension cable is cut and clamped on site down from the 1500 mm maximum.
What is the lead time?
Production time is 20 days or less.
Quote High Purity Alu Pendant Light SD2343-M
Tell us the quantity, the finish and the colour temperature and we come back with a price and a production slot.