Chandeliers and Pendant Lights
High Purity Alu Pendant Light SD2342-2RM
600 mm double ring pendant, 45 W, sand black, 1500 mm drop
Chandeliers and Pendant Lights
Product Overview
SD2342-2RM is a 600 mm diameter pendant built from two intersecting aluminium rings on a single suspension. It runs at 45 W from Epistar SMD2835 diodes with a YSD driver and hangs to 1500 mm. The sand black finish and silicone diffuser keep the lit face matt rather than glossy, which matters when the fixture hangs at eye level over a stair or a void.
| Material | Aluminum +Iron+ silicone |
|---|---|
| Product Size | Φ600*H1500mm |
| Available Colours | sand black |
| LED Colour Temperature | 3000K/4000K/6000K |
| LED and Driver | Epistar SMD2835 YSD driver 45W |
| Packaging | Single packaging per piece |
| Production Time | 20 days or less |
| Delivery Time | Based on the mode of shipping chosen |
Key Benefits
What You Get From This Model
- Two rings give the fixture depth from every viewing angle, unlike a flat single ring
- 45 W in a 600 mm body is enough to be the main light over a dining or meeting table
- Sand black hides dust and fingerprints better than a polished finish in a public space
- Silicone diffuser removes glare when the fixture is seen from below at close range
- One suspension point carries the whole assembly, so only one ceiling fixing is needed
Problems It Solves
What It Fixes On Site
- Flat ring pendants look thin when they are seen from a stair landing above
- Glossy black fixtures show every mark in a lobby
- Multi-ring fixtures often need several ceiling fixings and a coordination drawing
Application Scenarios
Where This Model Is Installed
- Stairwells and double-height voids where the fixture is seen from several levels
- Round dining tables 1.2 m to 1.4 m across
- Hotel lobby seating groups
- Reception areas in offices and clinics
Who It Is For
Buyers Who Specify It
- Project lighting buyers specifying a sculptural pendant for a void
- Interior contractors on villa and duplex apartment projects
- Wholesalers stocking a mid-size ring chandelier
Technical Features
How It Is Built
- 600 mm diameter, two intersecting rings, 1500 mm suspension
- Aluminium body with iron structure and silicone diffuser
- Epistar SMD2835 with YSD driver, 45 W
- Sand black finish
Quality Control
What We Check Before It Ships
- Raw material selection checked before processing
- In process checks during assembly and wiring
- Every fixture powered and inspected before packing
- Packing verified by drop test before a run ships
Customisation Options
What Can Be Changed To Order
- Colour temperature selected per line item: 3000K, 4000K or 6000K
- Body colour sprayed to order outside the standard finishes
- Suspension drop cut at the factory when the measured ceiling height is supplied
- Private label cartons and labelling agreed at order stage
Certification documents beyond our export certificate are supplied on request against the destination market. We do not publish claims we cannot evidence.
Use Guide
Installing And Living With It
- Allow at least 2100 mm clear below the fixture where people walk under it
- Over a table, hang the bottom ring 750 to 850 mm above the table top
- Fix to the structural slab, not to the plasterboard, when the drop is close to 1500 mm
Comparison
How It Differs From The Alternatives
| Compared with | Difference |
|---|---|
| SD2341-2RM | Single 600 mm diameter instead of the 800 plus 600 mm stepped pair, for rooms that cannot take an 800 mm ring |
| SD2341-1RM | Two intersecting rings instead of one, for a fuller form at the same 600 mm diameter |
Also Consider
Related Products
Chandeliers and Pendant LightsHigh Purity Alu Pendant Light SD2343-M1270 mm linear wave pendant, 50 mm wide, 18 W, sand black and greyView specification
Chandeliers and Pendant LightsHigh Purity Alu Ceiling Light SX2342-2RS400 mm surface ring ceiling light, 220 mm deep, 30 W, sand blackView specification
Chandeliers and Pendant LightsHigh Purity Alu Pendant Light SD2341-2RM800 mm and 600 mm stepped double ring pendant, 75 W, grey and goldView specificationCase Studies
Projects Using This Range
Case StudyChandelier Project in FranceThe fixture had to be read from the ground floor, from the stair itself and from the landing above, which rules out anything flat.Read more
Case StudyChandelier Project in DubaiA lobby ceiling of that size cannot be held by one fixture, so the installation had to be built from repeated elements that still read as one piece.Read more
Case StudyChandelier Project in IndiaThe room had a high ceiling and a wide seating group, so a single ring would have looked undersized.Read moreKnowledge Centre
Related Guides
Design GuideHow to Size a Pendant for a Stair VoidStair voids are where most pendant orders go wrong. The fixture is either lost in the space or hanging where someone will walk into it.Read more
Process GuidePacking and Drop Testing Lighting for ExportA fixture that is perfect when it leaves the line and bent when it arrives is a failed order. This is how our packing is built and checked.Read moreQuestions Buyers Ask
High Purity Alu Pendant Light SD2342-2RM Questions
What is the diameter of SD2342-2RM?
600 mm across, with two intersecting rings.
How far down does it hang?
Up to 1500 mm, adjustable shorter on site.
Which driver is fitted?
A YSD driver at 45 W.
Is the black finish glossy or matt?
Sand black, a matt textured finish.
Can it be ordered in gold?
The standard finish is sand black. Other colours are sprayed to order, confirm the reference before the order is placed.
How is a 600 mm ring packed for sea freight?
Single packaging per piece, and our cartons are checked by drop test before a run ships.
Quote High Purity Alu Pendant Light SD2342-2RM
Tell us the quantity, the finish and the colour temperature and we come back with a price and a production slot.