SunGold President Solar Lantern - Solar Lanterns
SunGold President Solar Lantern view 2SunGold President Solar Lantern view 3
Solar Lanterns

SunGold President Solar Lantern

Model SunGold President

A 2.5W lantern with 24 LEDs, LiFePO4 battery, USB phone charging and a remaining lighting time indicator.

Drawings and artwork for OEM work can be sent to [email protected] or over WhatsApp. We do not use web forms.

Product Overview

A 2.5W lantern with 24 LEDs, LiFePO4 battery, USB phone charging and a remaining lighting time indicator.

Portable solar lanterns with USB phone charging, dimmable output and lithium or LiFePO4 batteries, built for households with no grid connection.

Key Benefits

  • High efficiency solar panel
  • Four steps of dimmable lumen
  • Micro-programmed Control Unit providing protection from over voltage, over current, over charge, over discharge and short-circuit
  • Low voltage remind
  • 360 angles lighting
  • With USB mobile charging function
  • With remaining lighting time indicator
  • Certification: CE, RoHS

Who It Is For

Distributors and last-mile retailers selling single-light products, relief and rural-electrification buyers, and camping or fishing retailers.

Problems It Solves

  • Kerosene and candles cost money every week and give poor light for reading and cooking.
  • Households with no grid connection still need to charge a phone.
  • Cheap lanterns fail within a season because the battery and the charge control are not matched.

Application Scenarios

  • Home and house lighting
  • Remote, mountainous, desert and grassland areas
  • Village and country areas
  • Camping, outdoor activities and travelling
  • Lighting at night
  • Rural areas and emergency use

Technical Features

  • High efficiency solar panel
  • Four steps of dimmable lumen
  • Micro-programmed Control Unit providing protection from over voltage, over current, over charge, over discharge and short-circuit
  • Low voltage remind
  • 360 angles lighting
  • With USB mobile charging function
  • With remaining lighting time indicator
  • Certification: CE, RoHS

Specifications

Cable5m
Solar panel2.5W / 8.7V polycrystalline silicone
Battery1450mAh / 6.6V LiFePO4
Dimming3 steps dimmable
LED24
Brightness, highest270LM
Charging time8-10 hours
Lighting time2.4-10 hours
Mobile chargingYes
Remaining lighting time indicatorYes
AccessoriesCellphone charger cable x1, cellphone heads x3
Product size118 x 122 x 27 mm

Figures are the manufacturer specification for this model. Anything not listed here is confirmed in writing with the quotation.

Materials

Solar panel2.5W / 8.7V polycrystalline silicone
Battery1450mAh / 6.6V LiFePO4
LED24

Quality Control

  • Micro-programmed control units on the lighting products protect against over voltage, over current, over charge, over discharge and short circuit.
  • Solar panels are quoted at a 5 to 10 year lifespan and LED bulbs at 50,000 hours.
  • Products are stated to meet ISO, SGS, BV, COC, PVOC, SONCAP, SASO, CIQ, CE and RoHS requirements.
  • The company's own lamp development passed the Indonesian laboratory test before volume supply.
  • Certified models are tested by third parties: VeraSol certification on the SunAwada, VeraSol testing on the SunAce-Li, and the Lighting Global quality standards on the Lamp2Torch, SunAce II and SunBase.

How It Is Manufactured

Tooling and moulding

Housings start from our own moulds. The company built its moulding capability when it developed the Indonesian SEHEN lamp, and that is still where a new housing begins.

Component sourcing and incoming check

Cells, panels, LEDs and control boards are sourced and checked before they reach the line. Cost engineering happens here, not by thinning the specification later.

Board and wiring assembly

Charge control, protection and, on PAYG models, the token firmware are fitted and wired to the lamp and output ports.

Line assembly

Housings, panels, cables and accessories are assembled and packed at the Shenzhen workshop. Lantern supply ability is quoted at 100,000 pieces per month.

Function and run test

Charge, discharge, brightness step and protection behaviour are checked before the unit is boxed.

Packing and loading

Retail cartons and export packing, with container loading figures confirmed per model before shipment.

See the factory

Certifications

CE and RoHS

Declared for this model on the manufacturer specification.

Customisation Options

  • Housing colour and customer logo
  • Lamp count, cable length and accessory pack
  • Battery size and panel wattage within the same chassis
  • Retail packaging and language of the manual

How OEM development works

Compared With Other Solar Lanterns

SpecificationSunGold President Solar LanternSunAce-Li Solar Lantern With Phone ChargingSunAce II Solar Lantern With Remote ControlLamp2Torch Solar Lantern With Integrated Torch
Solar panel2.5W / 8.7V polycrystalline silicone2W / 5V polycrystalline silicone, 5M cable3W / 5V polycrystalline5W polycrystalline silicone panel
Battery1450mAh / 6.6V LiFePO42200mAh 3.7V rechargeable lithium3000mAh LiFePO45200mAh / 3.7V lithium-ion

SunAce-Li Solar Lantern With Phone Charging SunAce II Solar Lantern With Remote Control Lamp2Torch Solar Lantern With Integrated Torch

Use Guide

  1. Set the panel in the sun

    Face the panel at the open sky with nothing shading it. Roof edges and tree branches cost more output than most users expect. A full charge takes 8-10 hours.

  2. Watch the indicator, not the clock

    The charging and battery indicators tell you when the cell is full. Charging past full does no harm because the control unit blocks over charge.

  3. Match the brightness step to the job

    Use the lowest step that lets you see. Dropping a step can multiply the run time several times over on the same charge.

  4. Charge the phone in daylight if you can

    Phone charging draws from the same cell as the lamp. Charging while the panel is working leaves more for the evening.

  5. Keep the cell from sitting flat

    Charge the product at least once a week even when it is not in use, so the battery is not stored empty.

SunGold President Solar Lantern FAQ

What size solar panel does the SunGold President Solar Lantern use?
2.5W / 8.7V polycrystalline silicone.
What battery is fitted?
1450mAh / 6.6V LiFePO4.
How long does a full charge take?
8-10 hours of good sun.
Can this product be customised for our brand?
Yes. Housing colour, logo, accessory pack and packaging are customisable, and the company develops to customer specification, as it did for the Indonesian SEHEN requirement.
What is the minimum order quantity and the lead time?
Both depend on the model and the level of customisation. Send the quantity and the destination and we will confirm in writing before you commit.
Can you send a sample before we order?
Yes. Ask for a sample by email or WhatsApp with the model name and your shipping address.

Talk to an Engineer About SunGold President Solar Lantern

Send the quantity, the destination country and any change you need to the specification. You will get an answer from the people who build it.

WhatsApp Email