SunAce-Li Solar Lantern With Phone Charging - Solar Lanterns
SunAce-Li Solar Lantern With Phone Charging view 2SunAce-Li Solar Lantern With Phone Charging view 3SunAce-Li Solar Lantern With Phone Charging view 4SunAce-Li Solar Lantern With Phone Charging view 5
Solar Lanterns

SunAce-Li Solar Lantern With Phone Charging

Model SunAce-Li

A 200 lumen rain-proof lantern on a wire stand with a 2W panel, lithium battery and four light settings. VeraSol tested.

Drawings and artwork for OEM work can be sent to [email protected] or over WhatsApp. We do not use web forms.

Product Overview

A 200 lumen rain-proof lantern on a wire stand with a 2W panel, lithium battery and four light settings. VeraSol tested.

Portable solar lanterns with USB phone charging, dimmable output and lithium or LiFePO4 batteries, built for households with no grid connection.

Key Benefits

  • Solar panel 2W / 5V polycrystalline silicone panel with 5M cable
  • Battery 2200mAh 3.7V rechargeable lithium
  • 20 pcs LEDs, super 200LM
  • Lighting settings: four options, low, high, higher, dim
  • Water-proof: rain-proof
  • With USB mobile phone charging
  • With LED indicates
  • Accessories: 4 in 1 mobile charge cable
  • VeraSol tested

Who It Is For

Distributors and last-mile retailers selling single-light products, relief and rural-electrification buyers, and camping or fishing retailers.

Problems It Solves

  • Kerosene and candles cost money every week and give poor light for reading and cooking.
  • Households with no grid connection still need to charge a phone.
  • Cheap lanterns fail within a season because the battery and the charge control are not matched.

Application Scenarios

  • Household lighting
  • Shop and stall lighting
  • Camping and fishing
  • Emergency lighting

Technical Features

  • Solar panel 2W / 5V polycrystalline silicone panel with 5M cable
  • Battery 2200mAh 3.7V rechargeable lithium
  • 20 pcs LEDs, super 200LM
  • Lighting settings: four options, low, high, higher, dim
  • Water-proof: rain-proof
  • With USB mobile phone charging
  • With LED indicates
  • Accessories: 4 in 1 mobile charge cable
  • VeraSol tested

Specifications

ModelSunAce-Li
Solar panel2W / 5V polycrystalline silicone, 5M cable
Battery2200mAh 3.7V rechargeable lithium
LEDs20 pcs
Brightness200LM
Lighting settingsFour options: low, high, higher, dim
Water resistanceRain-proof
Mobile chargingUSB
Accessories4 in 1 mobile charge cable

Figures are the manufacturer specification for this model. Anything not listed here is confirmed in writing with the quotation.

Materials

Solar panel2W / 5V polycrystalline silicone, 5M cable
Battery2200mAh 3.7V rechargeable lithium
LEDs20 pcs

Quality Control

  • Micro-programmed control units on the lighting products protect against over voltage, over current, over charge, over discharge and short circuit.
  • Solar panels are quoted at a 5 to 10 year lifespan and LED bulbs at 50,000 hours.
  • Products are stated to meet ISO, SGS, BV, COC, PVOC, SONCAP, SASO, CIQ, CE and RoHS requirements.
  • The company's own lamp development passed the Indonesian laboratory test before volume supply.
  • Certified models are tested by third parties: VeraSol certification on the SunAwada, VeraSol testing on the SunAce-Li, and the Lighting Global quality standards on the Lamp2Torch, SunAce II and SunBase.

How It Is Manufactured

Tooling and moulding

Housings start from our own moulds. The company built its moulding capability when it developed the Indonesian SEHEN lamp, and that is still where a new housing begins.

Component sourcing and incoming check

Cells, panels, LEDs and control boards are sourced and checked before they reach the line. Cost engineering happens here, not by thinning the specification later.

Board and wiring assembly

Charge control, protection and, on PAYG models, the token firmware are fitted and wired to the lamp and output ports.

Line assembly

Housings, panels, cables and accessories are assembled and packed at the Shenzhen workshop. Lantern supply ability is quoted at 100,000 pieces per month.

Function and run test

Charge, discharge, brightness step and protection behaviour are checked before the unit is boxed.

Packing and loading

Retail cartons and export packing, with container loading figures confirmed per model before shipment.

See the factory

Certifications

VeraSol tested

Tested under the VeraSol programme.

Customisation Options

  • Housing colour and customer logo
  • Lamp count, cable length and accessory pack
  • Battery size and panel wattage within the same chassis
  • Retail packaging and language of the manual

How OEM development works

Compared With Other Solar Lanterns

SpecificationSunAce-Li Solar Lantern With Phone ChargingSunGold President Solar LanternSunAce II Solar Lantern With Remote ControlLamp2Torch Solar Lantern With Integrated Torch
Solar panel2W / 5V polycrystalline silicone, 5M cable2.5W / 8.7V polycrystalline silicone3W / 5V polycrystalline5W polycrystalline silicone panel
Battery2200mAh 3.7V rechargeable lithium1450mAh / 6.6V LiFePO43000mAh LiFePO45200mAh / 3.7V lithium-ion

SunGold President Solar Lantern SunAce II Solar Lantern With Remote Control Lamp2Torch Solar Lantern With Integrated Torch

Use Guide

  1. Set the panel in the sun

    Face the panel at the open sky with nothing shading it. Roof edges and tree branches cost more output than most users expect.

  2. Watch the indicator, not the clock

    The charging and battery indicators tell you when the cell is full. Charging past full does no harm because the control unit blocks over charge.

  3. Match the brightness step to the job

    Use the lowest step that lets you see. Dropping a step can multiply the run time several times over on the same charge.

  4. Charge the phone in daylight if you can

    Phone charging draws from the same cell as the lamp. Charging while the panel is working leaves more for the evening.

  5. Keep the cell from sitting flat

    Charge the product at least once a week even when it is not in use, so the battery is not stored empty.

SunAce-Li Solar Lantern With Phone Charging FAQ

What size solar panel does the SunAce-Li Solar Lantern With Phone Charging use?
2W / 5V polycrystalline silicone, 5M cable.
What battery is fitted?
2200mAh 3.7V rechargeable lithium.
Can this product be customised for our brand?
Yes. Housing colour, logo, accessory pack and packaging are customisable, and the company develops to customer specification, as it did for the Indonesian SEHEN requirement.
What is the minimum order quantity and the lead time?
Both depend on the model and the level of customisation. Send the quantity and the destination and we will confirm in writing before you commit.
Can you send a sample before we order?
Yes. Ask for a sample by email or WhatsApp with the model name and your shipping address.

Talk to an Engineer About SunAce-Li Solar Lantern With Phone Charging

Send the quantity, the destination country and any change you need to the specification. You will get an answer from the people who build it.

WhatsApp Email