Other LED Signs
RGB LED Letters 12
Bars, arcades and entertainment venues that change the colour of the sign through the evening.
View specification
The sign had to sit on one brand colour during trading hours and run a colour sequence in the evening, from a single installation and a single power feed.
The sign had to sit on one brand colour during trading hours and run a colour sequence in the evening, from a single installation and a single power feed.
Channel letters are built with either translucent clear or white acrylic on the face, with waterproof RGB LED mounted on a PVC, stainless or aluminium back plate. A programme controller is supplied, either pre-loaded or carrying a colour change sequence specified at the time of order.
Clear acrylic for saturated colour with visible points, white for an even face with muted colour.
Waterproof RGB LED fixed to the back plate so the whole face is covered evenly.
Supplied with the letters, pre-loaded or programmed to the customer's sequence.
Transformer supplied; the mains feed to it is planned by the installer.
Joints are dressed before finishing, illuminated builds are wired and lit before the back closes, and polished and acrylic faces keep their protective film for the whole journey. Formal QC documentation is TBC and is not claimed here.
One sign that holds a fixed brand colour when it needs to and runs a programmed sequence when it does not.
The face material decision is made with the trade-off stated, rather than discovered when the sign is switched on.
Bars, arcades and entertainment venues that change the colour of the sign through the evening.
View specification
Brands whose logo colour has to stay correct whether the sign is on or off.
View specification
Flagship stores that want the face lit for daytime readability and the halo for a night look.
View specificationHospitality signage is read at night, at close range, and in rooms whose lighting has already been designed. The sign has to join that lighting scheme rather than fight it.
IndustryRetail signage is bought against a landlord specification, a fit-out date and a fascia that already exists. Those three constraints decide the build more often than the design does.
RGB LED Letters 18, in the frontlit led channel letters category. The full specification is on its own product page.
No. We do not publish client names or invented project narratives. This describes how the product itself is made and what constrains it, using our own production specification.
Yes, from your own artwork. The face material decision is made with the trade-off stated, rather than discovered when the sign is switched on.
7 to 10 days in production, plus roughly 4 to 5 days on DHL or UPS express door to door.
Send your own artwork and we will quote the same construction at your letter height, with the production window and the constraints stated up front.