QTY Hand Truck Variant 3
Two wheels, a toe plate and a back — the cheapest way to move a stack without a forklift.
Published Specification
- ModelHT6018
Include the quantity, your destination port or market and your company name. Renwei states that enquiries are answered within 12 hours.
What This Model Is
The HT6018 is a hand truck from the Qingdao Renwei catalogue.
Every figure on this page is taken from the published Renwei specification for this model; nothing has been estimated to fill a gap.
What the Specification Tells a Buyer
Matched spares from the same catalogue
Wheels, casters and tubes are published here as their own models with their own specifications, so a worn part can be ordered by model number instead of described over email.
Full Published Specification
Every value below is taken from the Renwei catalogue entry for this model. Rows marked as not published are shown rather than hidden, so you know exactly which questions to ask.
| Model | HT6018 |
|---|---|
| Load Capacity(kg) | Not published on the source site |
| Wheel | Not published on the source site |
| Body Size(mm) | Not published on the source site |
| Weight(kg) | Not published on the source site |
| QTY | Not published on the source site |
Reading this table
Wheel entries give the tyre size and type — for example 16*650-8 Air is a 16 inch pneumatic wheel on an 8 inch rim.
What Is Published and What to Ask
The source catalogue publishes wheel and dimension data for this model but does not publish the frame or tray material. Ask for the material and coating specification against the model number before ordering.
Before you order
Minimum order quantity, lead time, payment terms, warranty and certifications are not published by Renwei. Ask for all five in writing against this model number before planning a shipment.
Getting the Best From This Model
- Check the rated load against what you actually intend to carry, and remember that dense material reaches the limit long before the body is full.
- Load over the axle rather than at the far end, so the weight sits on the wheels instead of on the operator.
- Keep pneumatic wheels at the pressure marked on the tyre sidewall; an under-inflated wheel rolls badly and damages its own sidewall.
- Check wheel fixings after the first week of use and then periodically — most wheel failures start as a loose fixing.
Industries and Applications
Warehousing and Logistics
Retail and Wholesale Supply
Construction and Contracting
Solutions Relevant to This Model
Private Label and OEM
Spare Parts and After Sales
Wheel and Caster Matching
QTY Hand Truck Variant 3 Questions
What is the minimum order quantity and lead time?
Neither is published on the source site, so neither is stated here. Send this model number with the quantity you are considering and ask for both in writing before you plan a shipment.
Are certificates or test reports available for the HT6018?
The source site publishes no certification list, so none is claimed on this page. Request the specific certificates your market requires and ask for them in writing before ordering.
Other Hand Truck Models
Technical Reading
Choosing a Hand Truck
Pneumatic vs Solid vs Foam Wheels
How to Read a Wheel Size
Quote the QTY Hand Truck Variant 3
Send this model number with the quantity you need, your destination port or market, and your company name.