Stamped Steel Hardware Made in Our Own Press Shop
We are a factory, not a trading company. Shelf brackets, corner braces, door and window hardware, steel pallets and OEM stampings come off our own lines and through one inspection flow.
One Supplier for a Whole Shelf Bracket Range
Utility, decorative, folding, shelf-and-rod, plastic covered and plywood profiles in metric and imperial size ladders, finished white, grey, black, zinc plated or galvanized.
Door and Gate Hardware That Survives the Yard
Padlockable barrel bolts, concealed-screw safety hasps, offset-hole T hinges and automatic gate latches, including a 304 stainless version for washdown and coastal sites.
Steel Pallets That Ship Flat and Skip Fumigation
Seam welded hot dip galvanized pallets with 4-way entry, shipped knocked down and assembled on arrival. Customized footprints without extra mould cost.
Five Product Groups From One Press Shop
We stamp and form steel hardware: 74 catalogue products across shelf brackets, corner braces and mending plates, door and window hardware, dismountable steel pallets and made-to-drawing OEM components.
A Selection From the 74 Product Catalogue
Every model that was on our catalogue is still here, with its own size ladder and finish options. Nothing was merged or dropped.
Stayed Bracket
Plywood Bracket
Plywood Bracket
Flower Bracket
Corner Brace
Structural Corner Braces
Corner Brace
Corner Brace
Gate Latch - Stainless Steel
Gate Latch
Heavy Duty T Hinge
T Hinge
Grid Dismountable Pallet
Double Faces Dismountable Pallet
American Standard Pallet
Grid Dismountable Pallet with Full Surface Covered
Nail Plate
Wind Hook
Hoop Iron
Buyers Who Need a Whole Range Held to One Standard
Hardware retail and DIY chains, builders merchants, furniture and shelving manufacturers, fence gate and agricultural suppliers, and warehouse operators who buy pallets by the container.
Hardware Retail And DIY Chains
Retail buyers need a bracket range that looks like one range on the shelf and behaves like one range in the warehouse. That means one hole pattern,...
Furniture And Shelving Manufacturers
Furniture factories buy hardware by the assembly, not by the piece. The parts that matter are the ones that hold a frame square and the ones the...
Building And Timber Frame Contractors
Outdoor timber connections fail in two ways: the fixing tears out as the timber moves, or the coating is pierced and the connection rusts from the...
Agriculture And Livestock Buildings
On a farm the hardware is handled with gloves on, in the wet, often one-handed. A latch that needs two hands or a bolt that seizes in the dust will...
Warehousing And Logistics Operators
A pallet fleet is a running cost, not a purchase. Timber is cheap to buy, expensive to certify and impossible to repair economically. The arithmetic...
Splitting a Range Across Four Factories Is What Creates the Rework
Most buyers of this hardware are not short of suppliers; they are short of one supplier who can hold a whole range to the same finish standard, the same hole pattern and the same inspection flow. Splitting a range across four factories is what creates mismatched packs, re-labelled cartons and rework on the line.
- A range built from several factories arrives in mismatched whites and greys
- Near-fit parts force packers, adaptors and rework on the assembly line
- A discontinued component can stop a whole product range
- Defects found at your warehouse are the most expensive place to find them
Why Customers Choose Us
We are the factory. The press shop, the size ladders and the inspection flow are ours, so a range built here stays consistent, a custom size does not need a new supplier, and the answer to a technical question comes from the people running the presses.
We Are the Factory Not a Trading Company
Two photographs and one flow chart, both from our own operation. We publish no certification marks we cannot evidence.
Our Press Shop
Our press shop in Zhejiang. Mechanical stamping presses, an overhead crane for coil and tooling handling, and packed cartons staged for despatch along the left of the bay.
Our Inspection Flow
The inspection flow our production runs to, from incoming material inspection through to the final check before delivery. At or above 10 percent defective, mass production is stopped rather than sorted.
The Inspection Flow in Full
- Material inspection, with failed material returned rather than run
- First lot sample inspection before mass production is released
- Random inspection during mass production covering 30 to 40 percent of output
- Finished goods inspection against the lot
- Mass production stopped at or above 10 percent defective; repair or rework below it
- Comprehensive performance inspection of 15 to 20 minutes
- Packaging to the approved spec, then a final inspection before delivery
How We Work With You
Three routes through the factory, depending on whether you are building a private label range, checking how we control quality, or working out how the goods get to you.
OEM And Private Label Programme
We offer customers private labels as well as our own brand. A private label programme is not just a printed carton: it is a size ladder, a...
Quality Control From Material To Delivery
Our quality mission is to deliver quality products and service to our customers, and that needs the discipline and control to produce products...
Export Packing And Shipping
Hardware is dense and low value per kilo, so packing and mode decide whether a shipment makes commercial sense. We agree both before production...
Guides Written Around Our Own Size Ladders
Practical notes on choosing, specifying and installing the hardware we make, with the real figures from our catalogue rather than generic advice.
How to Choose a Shelf Bracket Size and Thickness
Bracket sizes are quoted as wall leg x shelf leg x material thickness. This guide explains how to read that notation, how to match it to a...
Shelf Bracket Finishes Compared White Grey Black Zinc and Galvanized
Powder coat, zinc plating, brass and nickel plating and hot dip galvanizing all appear across our range. Each one fails in a different way,...
Corner Brace vs Mending Plate Which Reinforcement to Use
Both parts reinforce a joint, and they are not interchangeable. The choice is decided by the geometry of the joint, not by which one is...
Questions Buyers Ask Us First
The answers below are the ones we give on every first enquiry.
Are you a trading company or a factory?
We are a factory.
Could you provide OEM or ODM service?
Yes. We can produce to your specification or design according to your request.
Why should I consider you? What is your strength?
Three things. No hassles, because we are easy to communicate with. No delays, because we are flexible with production scheduling. No risks, because we are detail-oriented and take care of every one of your quality needs.
Do you have a minimum order quantity?
Yes, we have a very small minimum order quantity and the quantity can be negotiated.
What shipment can you do?
We can do EX Works, FOB, CIF, DDU or DDP, and we can ship by sea, by rail or by courier.
What kind of payment can you accept?
We can accept T/T, D/P, L/C, Western Union and PayPal.
Could you provide private label?
Yes. We can provide private label and our own label.
How can I get samples?
We can supply free samples where the sample value is less than US$20 and you have a DHL, TNT, UPS or FedEx account or agree to pay the freight cost. Where samples cost more than US$20 we ask you to pay the sample and freight cost, and we send the samples on receipt of payment.
Send Us the Range You Need Quoted
Email the model numbers, sizes, finishes and quantities, or send a drawing or sample if the part is your own. We answer with pricing, lead time and packing.