128 Plywood Bracket
128 Plywood Bracket is sized for plywood and board shelving, with a wide bearing face so the fixing does not crush the board edge. The section is stated in four dimensions, the last of which is the bearing width. This model is listed in 4 sizes, from 100 x 150 x 28 x 15 mm to 250 x 300 x 28 x 15 mm.
Available Sizes
- 100 x 150 x 28 x 15 mm
- 150 x 200 x 28 x 15 mm
- 200 x 250 x 28 x 15 mm
- 250 x 300 x 28 x 15 mm
What This Model Gives You
- Wide bearing face spreads the fixing load across the board
- Sized around common plywood shelf depths
- Simple flat form packs tightly for shipping
How It Is Built
- Wide bearing face
- Punched fixing holes
Application Scenarios
- Workshop plywood shelving
- Storeroom board shelving
- Shopfitting and display
Who It Is For
- Joinery and shopfitting suppliers
- Board and panel merchants
- Workshop fit-out contractors
Problems It Solves
- Narrow brackets crush the edge of a plywood shelf over time
- Board shelving sags between supports that are too far apart
128 Plywood Bracket Specification
Every figure below comes from our own product data. Where a value is not published we leave the row out rather than estimate it.
| Product Code | 128 |
|---|---|
| Product Type | Plywood Bracket |
| Sizes | 100 x 150 x 28 x 15 mm · 150 x 200 x 28 x 15 mm · 200 x 250 x 28 x 15 mm · 250 x 300 x 28 x 15 mm |
| Number of Sizes | 4 |
| Material Thickness | 15.0 mm |
| Material | Cold rolled steel strip |
| Customization | OEM and ODM to drawing or sample; private label and own label |
| Minimum Order | Very small minimum order quantity, negotiable |
| Shipping Terms | EX Works, FOB, CIF, DDU or DDP by sea, rail or courier |
Materials
- Cold rolled steel strip
Manufacturing Process
- Blanking
- Punching
- Press forming
- Surface finishing
- Inspection
- Packing
The Checks This Part Passes
- Material inspection, with failed material returned rather than run
- First lot sample inspection before mass production is released
- Random inspection during mass production covering 30 to 40 percent of output
- Finished goods inspection against the lot
- Mass production stopped at or above 10 percent defective; repair or rework below it
Changing It to Suit You
- OEM and ODM production to your drawing or sample
- Private label or our own label
- Sizes between the listed steps run to order
- Finish changed to your specification, applied after forming
- Retail packing with mounting screws on request
How It Compares
Compared With Standard shelf brackets
The wider bearing face is what protects a soft board edge; a narrow bracket concentrates the load into a line.
Use Guide
- Set supports so the unsupported span suits the board thickness; 18 mm ply is usually kept under 800 mm.
- Screw through every hole to stop the board rocking on the bracket.
Others in This Family
Further Reading
How to Choose a Shelf Bracket Size and Thickness
Bracket sizes are quoted as wall leg x shelf leg x material thickness. This guide explains how to read that notation, how to...
Shelf Bracket Finishes Compared White Grey Black Zinc and Galvanized
Powder coat, zinc plating, brass and nickel plating and hot dip galvanizing all appear across our range. Each one fails in a...
Questions About the 128 Plywood Bracket
What does the fourth dimension mean?
It is the bearing width of the face that sits under the board.
Can you supply these in a heavier gauge?
Yes, heavier gauge versions are run to order.
Which sizes of the 128 Plywood Bracket are available?
This model is listed in 4 sizes: 100 x 150 x 28 x 15 mm, 150 x 200 x 28 x 15 mm, 200 x 250 x 28 x 15 mm, 250 x 300 x 28 x 15 mm. Sizes between the listed steps are run to order.
Can I get a sample of the 128 Plywood Bracket before ordering?
Yes. Samples under US$20 in value are free if you have a DHL, TNT, UPS or FedEx account or agree to cover the freight. Above US$20 we ask you to cover the sample and freight cost, and we ship on receipt of payment.
What payment terms do you accept?
We accept T/T, D/P, L/C, Western Union and PayPal.
Ready to Price the 128 Plywood Bracket
Tell us the size, the finish and the quantity. If you need a size that is not listed, say so: sizes between the listed steps are run to order.