219 Structural Corner Braces
219 Structural Corner Braces is an imperial-sized corner brace for reinforcing 90 degree angles from the inside or the outside of the corner. The larger sizes carry slots for carriage bolts and a black powder coat finish for outdoor use. This model is listed in 2 sizes, from 4.9″ x 3″ x 1/8″ to 6.2″ x 3″ x 1/4″.
Available Sizes
- 4.9″ x 3″ x 1/8″
- 6.2″ x 3″ x 1/4″
What This Model Gives You
- Used for reinforcing 90 degree angles by applying to the inside or outside of the corner
- Slots for 1/2″ Carriage Bolt
- Larger bolt holes provide options for structural support
- Chamfered corners provide decorative look
- Black powder coat finish for improved weather resistance
- Hot dipped galvanized finish available
- Fits the inside or the outside of a 90 degree corner
How It Is Built
- Slots or clearance for carriage bolts or nails depending on size
- Chamfered corners on the structural sizes
- Powder coat or plated finishes
- Used for reinforcing 90 degree angles by applying to the inside or outside of the corner
- Slots for 1/2″ Carriage Bolt
- Larger bolt holes provide options for structural support
- Chamfered corners provide decorative look
- Black powder coat finish for improved weather resistance
Application Scenarios
- Deck and pergola corners
- Gate frame corners
- Chest, screen and furniture corners
Who It Is For
- Timber frame contractors
- Furniture and chest makers on the smaller sizes
- Fence, gate and deck builders
Problems It Solves
- Nailed corners in exposed timber work loosen within a season
- Decorative braces rust at the corner where the coating is thinnest
219 Structural Corner Braces Specification
Every figure below comes from our own product data. Where a value is not published we leave the row out rather than estimate it.
| Product Code | 219 |
|---|---|
| Product Type | Structural Corner Brace |
| Sizes | 4.9″ x 3″ x 1/8″ · 6.2″ x 3″ x 1/4″ |
| Number of Sizes | 2 |
| Material | Hot rolled steel |
| Customization | OEM and ODM to drawing or sample; private label and own label |
| Minimum Order | Very small minimum order quantity, negotiable |
| Shipping Terms | EX Works, FOB, CIF, DDU or DDP by sea, rail or courier |
Materials
- Hot rolled steel
Manufacturing Process
- Blanking
- Punching
- Press forming
- Powder coating
- Inspection
- Packing
The Checks This Part Passes
- Material inspection, with failed material returned rather than run
- First lot sample inspection before mass production is released
- Random inspection during mass production covering 30 to 40 percent of output
- Finished goods inspection against the lot
- Mass production stopped at or above 10 percent defective; repair or rework below it
Changing It to Suit You
- OEM and ODM production to your drawing or sample
- Private label or our own label
- Sizes between the listed steps run to order
- Finish changed to your specification, applied after forming
- Retail packing with mounting screws on request
How It Compares
Compared With Light gauge corner braces
These carry a bolt rather than a screw and hold a structural connection rather than a furniture joint.
Use Guide
- Fit to the outside of the corner where the connection is structural and to the inside where it must not be seen.
- Drill a 3/32 inch pilot hole before driving wood screws on the smaller sizes.
Others in This Family
Questions About the 219 Structural Corner Braces
Which sizes take a carriage bolt?
The 219 takes a 1/2 inch carriage bolt and the 220 takes 5/16 inch. The smaller sizes are screw or nail fixed.
Can you supply brass plated?
Yes, brass plated is a stock finish on the 217 size.
Which sizes of the 219 Structural Corner Braces are available?
This model is listed in 2 sizes: 4.9″ x 3″ x 1/8″, 6.2″ x 3″ x 1/4″. Sizes between the listed steps are run to order.
Can I get a sample of the 219 Structural Corner Braces before ordering?
Yes. Samples under US$20 in value are free if you have a DHL, TNT, UPS or FedEx account or agree to cover the freight. Above US$20 we ask you to cover the sample and freight cost, and we ship on receipt of payment.
What payment terms do you accept?
We accept T/T, D/P, L/C, Western Union and PayPal.
Ready to Price the 219 Structural Corner Braces
Tell us the size, the finish and the quantity. If you need a size that is not listed, say so: sizes between the listed steps are run to order.