403 Grid Dismountable Pallet with Full Surface Covered
403 Grid Dismountable Pallet with Full Surface Covered is a dismountable steel pallet for warehouse and workshop use, seam welded from hot dip galvanized steel with a 4-way entry. It ships knocked down, which is what makes a steel pallet economic to export in the first place. This model is listed in one size, 1200 x 1000 x 135 mm.
Available Sizes
- 1200 x 1000 x 135 mm
What This Model Gives You
- Dismountable design saves transportation cost
- Special reinforcement design for supporting pillar
- Obtuse angle design make it safe.
- Due to durable, high strength and easy repair, the cost in long term is cheaper than plastic pallett and wooden pallett.
- Rust resistance
- Seamless welding with hot dip galvanized steel.
- Reasonable structure with 4-way entry
How It Is Built
- Dismountable bolted construction
- Hot dip galvanized steel
- 4-way entry
- Anti-slip rubber and anti-strike rubber available on request
- Dismountable design saves transportation cost
- Special reinforcement design for supporting pillar
- Obtuse angle design make it safe.
- Due to durable, high strength and easy repair, the cost in long term is cheaper than plastic pallett and wooden pallett.
Application Scenarios
- Warehouse block stacking
- Production line part transfer
- Export shipping
- Cold and wet storage areas
Who It Is For
- Warehouse and distribution centre operators
- Automotive and machinery plants moving heavy parts
- Exporters shipping to markets with timber fumigation rules
- Cold store and food plant operators
Problems It Solves
- Wooden pallets need ISPM 15 fumigation and still get rejected at the border
- Plastic pallets cannot be repaired once a runner cracks
- Assembled pallets waste most of a container on air
403 Grid Dismountable Pallet with Full Surface Covered Specification
Every figure below comes from our own product data. Where a value is not published we leave the row out rather than estimate it.
| Product Code | 403 |
|---|---|
| Product Type | Steel Pallet |
| Sizes | 1200 x 1000 x 135 mm |
| Number of Sizes | 1 |
| Material Thickness | 135.0 mm |
| Material | Hot dip galvanized steel |
| Customization | OEM and ODM to drawing or sample; private label and own label |
| Minimum Order | Very small minimum order quantity, negotiable |
| Shipping Terms | EX Works, FOB, CIF, DDU or DDP by sea, rail or courier |
Materials
- Hot dip galvanized steel
Manufacturing Process
- Steel cutting
- Roll forming
- Punching
- Seam welding
- Hot dip galvanizing
- Assembly check
- Inspection
- Knock down packing
The Checks This Part Passes
- Material inspection, with failed material returned rather than run
- First lot sample inspection before mass production is released
- Random inspection during mass production covering 30 to 40 percent of output
- Finished goods inspection against the lot
- Mass production stopped at or above 10 percent defective; repair or rework below it
Changing It to Suit You
- OEM and ODM production to your drawing or sample
- Private label or our own label
- Sizes between the listed steps run to order
- Finish changed to your specification, applied after forming
- Retail packing with mounting screws on request
How It Compares
Compared With Wooden pallets
A steel pallet needs no fumigation, does not absorb water and can be repaired rather than scrapped, so the cost over its life is lower even though the first price is higher.
Compared With Plastic pallets
Steel keeps its strength at temperature extremes and can be welded back into service after damage; a cracked plastic pallet is scrap.
Use Guide
- Assemble on a flat floor and tighten the pillar fixings evenly before loading.
- Specify anti-slip rubber where the load is smooth-bottomed such as drums or steel cases.
- Order a customized size rather than overhanging the load; no extra mould cost applies.
Further Reading
Steel Pallets vs Plastic and Wooden Pallets
Timber is the cheapest pallet to buy and the most expensive to certify. Plastic is clean until it cracks. The case for steel is...
How Dismountable Steel Pallets Cut Freight Cost
An assembled pallet is mostly air. The dismountable design is what makes importing steel pallets economic rather than...
Inside Our Inspection Flow From Incoming Steel to Delivery
Seven checkpoints between the steel arriving and the carton leaving, and the one rule that decides whether a lot is repaired or...
Questions About the 403 Grid Dismountable Pallet with Full Surface Covered
Does the pallet need fumigation for export?
No. Steel pallets are outside the ISPM 15 timber rules, so there is no fumigation step and no heat treatment certificate to chase.
How much freight does the knock-down design save?
The pallets ship flat and are assembled on arrival, so a container carries several times the number of pallets that assembled units would allow. We will calculate the exact figure for your size and container type.
Can you make a size that is not listed?
Yes. Customized sizes are available without extra mould cost.
Can I get a sample of the 403 Grid Dismountable Pallet with Full Surface Covered before ordering?
Yes. Samples under US$20 in value are free if you have a DHL, TNT, UPS or FedEx account or agree to cover the freight. Above US$20 we ask you to cover the sample and freight cost, and we ship on receipt of payment.
What payment terms do you accept?
We accept T/T, D/P, L/C, Western Union and PayPal.
Ready to Price the 403 Grid Dismountable Pallet with Full Surface Covered
Tell us the size, the finish and the quantity. If you need a size that is not listed, say so: sizes between the listed steps are run to order.