313 T Hinge
313 T Hinge is a T hinge manufactured from hot rolled steel for the French market, with offset screw holes that keep the fixings out of the same timber grain line. Lengths run from 80 mm to 600 mm with the gauge increasing with the length. This model is listed in 11 sizes, from 80 x 1.5 mm to 600 x 2.0 mm. Stock finishes are zinc plated and black.
Available Sizes
- 80 x 1.5 mm
- 100 x 1.5 mm
- 120 x 1.5 mm
- 150 x 1.5 mm
- 200 x 2.0 mm
- 250 x 2.0 mm
- 300 x 2.0 mm
- 350 x 2.0 mm
- 400 x 2.0 mm
- 500 x 2.0 mm
- 600 x 2.0 mm
What This Model Gives You
- Offset screw holes for extra strength and to prevent wood from splitting
- Tight pin for left or right hand applications
- Light duty
- Manufactured with hot-rolled steel
- Black finish available for extra weather resistance
- Offset screw holes prevent the timber from splitting along one grain line
- Tight pin suits left or right hand applications
How It Is Built
- Offset screw holes
- Tight pin for left or right hand applications
- Manufactured with hot-rolled steel
- Black finish available for extra weather resistance
- Offset screw holes for extra strength and to prevent wood from splitting
- Light duty
Application Scenarios
- Timber gates
- Shed and outbuilding doors
- Barn and stable doors
- Shutters and covers
Who It Is For
- Gate and shed manufacturers
- Joinery and door suppliers
- Agricultural building contractors
Problems It Solves
- In-line screw holes split a timber gate stile along the grain
- Long hinges in thin gauge bend under the weight of a gate
313 T Hinge Specification
Every figure below comes from our own product data. Where a value is not published we leave the row out rather than estimate it.
| Product Code | 313 |
|---|---|
| Product Type | T Hinge |
| Sizes | 80 x 1.5 mm · 100 x 1.5 mm · 120 x 1.5 mm · 150 x 1.5 mm · 200 x 2.0 mm · 250 x 2.0 mm · 300 x 2.0 mm · 350 x 2.0 mm · 400 x 2.0 mm · 500 x 2.0 mm · 600 x 2.0 mm |
| Number of Sizes | 11 |
| Material Thickness | 1.5 - 2.0 mm |
| Material | Hot rolled steel |
| Finish | zinc plated and black |
| Customization | OEM and ODM to drawing or sample; private label and own label |
| Minimum Order | Very small minimum order quantity, negotiable |
| Shipping Terms | EX Works, FOB, CIF, DDU or DDP by sea, rail or courier |
Materials
- Hot rolled steel
Manufacturing Process
- Blanking
- Punching
- Press forming
- Pin assembly
- Plating or black coating
- Inspection
- Packing
The Checks This Part Passes
- Material inspection, with failed material returned rather than run
- First lot sample inspection before mass production is released
- Random inspection during mass production covering 30 to 40 percent of output
- Finished goods inspection against the lot
- Mass production stopped at or above 10 percent defective; repair or rework below it
Changing It to Suit You
- OEM and ODM production to your drawing or sample
- Private label or our own label
- Sizes between the listed steps run to order
- Finish changed to your specification, applied after forming
- Retail packing with mounting screws on request
How It Compares
Compared With Butt hinges
A T hinge spreads the load along the door rail, which is what a wide timber gate needs. A butt hinge concentrates it at the edge.
Use Guide
- Fix the long strap along the door rail, not along the stile.
- Choose the length so the strap reaches at least one third of the way across the door.
Further Reading
Barrel Bolts Safety Hasps and Latches Explained
Three families of door hardware that are often specified interchangeably and should not be. What each one actually secures, and...
Choosing a Gate Latch for Out-Swing Gates and Animal Pens
An automatic latch closes itself. That single difference is why it belongs on a livestock gate and a manual drop latch does...
Questions About the 313 T Hinge
What is the difference between the light and heavy duty versions?
Both share the same length range. The heavy duty version is the stronger section for gates and barn doors; the light version suits shutters and light doors.
Which finishes are available?
Zinc plated and black. Black is chosen where the hinge is exposed to weather.
Which sizes of the 313 T Hinge are available?
This model is listed in 11 sizes: 80 x 1.5 mm, 100 x 1.5 mm, 120 x 1.5 mm, 150 x 1.5 mm, 200 x 2.0 mm, 250 x 2.0 mm, 300 x 2.0 mm, 350 x 2.0 mm, 400 x 2.0 mm, 500 x 2.0 mm, 600 x 2.0 mm. Sizes between the listed steps are run to order.
Can I get a sample of the 313 T Hinge before ordering?
Yes. Samples under US$20 in value are free if you have a DHL, TNT, UPS or FedEx account or agree to cover the freight. Above US$20 we ask you to cover the sample and freight cost, and we ship on receipt of payment.
What payment terms do you accept?
We accept T/T, D/P, L/C, Western Union and PayPal.
Ready to Price the 313 T Hinge
Tell us the size, the finish and the quantity. If you need a size that is not listed, say so: sizes between the listed steps are run to order.