Corner Braces And Mending Plates
Corner braces, angle supports, mending plates and structural braces for furniture joints, crates, timber frames and outdoor structures.
All 20 Corner Braces And Mending Plates
Corner Brace
Structural Corner Braces
Corner Brace
Corner Brace
Strap Brace
Corner Plate
Mending Plate
Heavy Duty Mending Plate
T Plate
Heavy Duty Mending Plate
Mending Plate
Flat Corner Brace
Heavy Duty Angle Support
Extra Heavy Support Angle Support
Heavy Duty Angle Support
Corner Brace
Corner Brace
Corner Brace
Corner Brace
Corner Brace
Buyers We Supply
- Furniture and chair manufacturers
- Crate, case and packaging makers
- Timber frame, deck and pergola contractors
- Fence and gate installers
- Hardware retailers selling repair hardware
What Goes Wrong Without It
- Glued and nailed joints loosen as timber dries and the frame is moved
- Outdoor braces rust from the bolt hole outward once the coating is pierced
- A near-fit brace forces packers and rework on the assembly line
- Structural connections fail when a plain angle opens under load
Why This Group Is Worth Sourcing From One Factory
- 20 models from a 20 mm furniture brace up to a 380 mm gusseted angle support
- Metric and imperial size ladders side by side
- Bolt-slotted versions for connections that must move slightly
- Black powder coat and hot dipped galvanized finishes for outdoor use
Where It Is Used
- Chair, cabinet and table frame reinforcement
- Crate and case corners
- Pergola, deck and carport framing
- Gate and fence bracing
Where These Products Go
Furniture And Shelving Manufacturers
Furniture factories buy hardware by the assembly, not by the piece. The parts that matter are the ones that hold a frame square...
Building And Timber Frame Contractors
Outdoor timber connections fail in two ways: the fixing tears out as the timber moves, or the coating is pierced and the...
Agriculture And Livestock Buildings
On a farm the hardware is handled with gloves on, in the wet, often one-handed. A latch that needs two hands or a bolt that...
Guides for This Group
Shelf Bracket Finishes Compared White Grey Black Zinc and Galvanized
Powder coat, zinc plating, brass and nickel plating and hot dip galvanizing all appear across our range. Each one fails in a...
Corner Brace vs Mending Plate Which Reinforcement to Use
Both parts reinforce a joint, and they are not interchangeable. The choice is decided by the geometry of the joint, not by which...
Questions About Corner Braces And Mending Plates
What is the difference between a corner brace and a mending plate?
A corner brace works across a 90 degree joint. A mending plate splices two members along a straight line. Choose by the geometry of the joint.
Which parts take a carriage bolt?
The 215, 216, 219 and 220 braces are slotted for carriage bolts, 5/16 inch on most sizes and 1/2 inch on the 219.
Can these be hot dipped galvanized?
Yes. Hot dipped galvanizing is available on request across the corner brace, corner plate and strap brace lines.
Quote the Whole Corner Braces And Mending Plates Group
Tell us the models, sizes, finishes and quantities. We reply with pricing, lead time and the packing that suits your shipping mode.