217 Corner Brace
217 Corner Brace is an imperial-sized corner brace for reinforcing 90 degree angles from the inside or the outside of the corner. The larger sizes carry slots for carriage bolts and a black powder coat finish for outdoor use. This model is listed in one size, 1.5″ x 0.1 “. Stock finishes are zinc plated, black finish, brass plated and HDG.
Available Sizes
- 1.5″ x 0.1 “
What This Model Gives You
- Hole sizes fit Phillips Flat Screws sized #7.
- Drill a pilot hole with a 3/32″ sized drill bit when using wood screws.
- Designed for chests, screens, windows, furniture, etc.
- Used for reinforcing inside of right angle corner joints
- Screw holes are countersunk
- Fits the inside or the outside of a 90 degree corner
- Larger bolt holes give options for structural support
How It Is Built
- Slots or clearance for carriage bolts or nails depending on size
- Chamfered corners on the structural sizes
- Powder coat or plated finishes
- Hole sizes fit Phillips Flat Screws sized #7.
- Drill a pilot hole with a 3/32″ sized drill bit when using wood screws.
- Designed for chests, screens, windows, furniture, etc.
- Used for reinforcing inside of right angle corner joints
- Screw holes are countersunk
Application Scenarios
- Deck and pergola corners
- Gate frame corners
- Chest, screen and furniture corners
Who It Is For
- Timber frame contractors
- Furniture and chest makers on the smaller sizes
- Fence, gate and deck builders
Problems It Solves
- Nailed corners in exposed timber work loosen within a season
- Decorative braces rust at the corner where the coating is thinnest
217 Corner Brace Specification
Every figure below comes from our own product data. Where a value is not published we leave the row out rather than estimate it.
| Product Code | 217 |
|---|---|
| Product Type | Structural Corner Brace |
| Sizes | 1.5″ x 0.1 “ |
| Number of Sizes | 1 |
| Material | Hot rolled steel |
| Finish | zinc plated, black finish, brass plated and HDG |
| Customization | OEM and ODM to drawing or sample; private label and own label |
| Minimum Order | Very small minimum order quantity, negotiable |
| Shipping Terms | EX Works, FOB, CIF, DDU or DDP by sea, rail or courier |
Materials
- Hot rolled steel
Manufacturing Process
- Blanking
- Punching
- Press forming
- Powder coating
- Inspection
- Packing
The Checks This Part Passes
- Material inspection, with failed material returned rather than run
- First lot sample inspection before mass production is released
- Random inspection during mass production covering 30 to 40 percent of output
- Finished goods inspection against the lot
- Mass production stopped at or above 10 percent defective; repair or rework below it
Changing It to Suit You
- OEM and ODM production to your drawing or sample
- Private label or our own label
- Sizes between the listed steps run to order
- Finish changed to your specification, applied after forming
- Retail packing with mounting screws on request
How It Compares
Compared With Light gauge corner braces
These carry a bolt rather than a screw and hold a structural connection rather than a furniture joint.
Use Guide
- Fit to the outside of the corner where the connection is structural and to the inside where it must not be seen.
- Drill a 3/32 inch pilot hole before driving wood screws on the smaller sizes.
Others in This Family
Further Reading
Shelf Bracket Finishes Compared White Grey Black Zinc and Galvanized
Powder coat, zinc plating, brass and nickel plating and hot dip galvanizing all appear across our range. Each one fails in a...
Corner Brace vs Mending Plate Which Reinforcement to Use
Both parts reinforce a joint, and they are not interchangeable. The choice is decided by the geometry of the joint, not by which...
Questions About the 217 Corner Brace
Which sizes take a carriage bolt?
The 219 takes a 1/2 inch carriage bolt and the 220 takes 5/16 inch. The smaller sizes are screw or nail fixed.
Can you supply brass plated?
Yes, brass plated is a stock finish on the 217 size.
Can I get a sample of the 217 Corner Brace before ordering?
Yes. Samples under US$20 in value are free if you have a DHL, TNT, UPS or FedEx account or agree to cover the freight. Above US$20 we ask you to cover the sample and freight cost, and we ship on receipt of payment.
What payment terms do you accept?
We accept T/T, D/P, L/C, Western Union and PayPal.
Ready to Price the 217 Corner Brace
Tell us the size, the finish and the quantity. If you need a size that is not listed, say so: sizes between the listed steps are run to order.