Pain Points in This Industry
- Component spheres need a wiring aperture in a specific size.
- Finish has to match across a whole product range and repeat next season.
- Low unit price matters but so does a clean invisible seam.
- Small diameters usually need expensive tooling.
What Customers Need
- Standard press hole moulds so apertures cost nothing extra
- One alloy and one finish repeated batch after batch
- Stamping press pricing at production volumes
- Tapped threads for rods and canopies
Products That Fit
Hollow Brass Balls
Mirror polished H62 brass spheres for lighting jewellery sculpture and roof finials with tapped threads on request.
9 products
Hollow Aluminium Balls
Light A6061 aluminium spheres for suspended art elements and lampshades from ∅6mm to ∅3500mm.
3 products
Brass Hemispheres
Mirror polished or raw H62 brass half balls for door knockers lampshades jewellery sculpture and church roofs.
4 products
Aluminium Hemispheres
Light aluminium half balls stamped to ∅700mm or hand assembled to ∅3500mm with powder coating for lighting.
2 products
Hollow Steel Balls
Stamped water pressured or spun hollow spheres from ∅6mm to ∅3500mm with drilling tapping and threaded holes.
13 productsTypical Application Scenarios
- Brass lampshade spheres with a ∅38mm aperture
- Copper pendant balls
- Aluminium domes for a ceiling fixture
- Steel finials on furniture and handrails
Solution Flow
Concept and plan
Aperture size, thread and finish confirmed against your fixture drawing.
Solution and quotation
MOQ and mould fee, if any, stated up front.
Implementation and production
Stamping, welding, grinding, polishing or coating.
Inspection and packing
Batch checked against the approved sample.
Shipping and installing
Express, air or sea depending on order size.
Delivery Capability
- Diameters from ∅6mm to ∅3500mm, wall thickness 0.6mm to 16mm
- Stock supply in 1 to 3 days on standard hollow sizes
- Scheduled production in 7 to 15 days, sculptures in 15 to 30 days
- Express, air and sea freight with EXW, FOB, C&F or DDU terms
- Segmented construction with bolted internal ribs above container limits
Recommended Products
100mm Hollow Brass Balls
102mm
100mm Hollow Copper Balls Lampshade
90mm200mm Hollow Aluminum Spheres
200mm
Large Aluminum Spheres
1600mm4inch Brass Half Balls
102mm
Copper Hemisphere
1000mm, 102mm, 10mm, 1100mm, 114mm, 1200mm, 120mm, 127mm, 1300mm, 133mm, 138mm, 1400mm, 1500mm, 150mm, 159mm, 15mm, 1600mm, 1700mm, 1800mm, 180mm, 1900mm, 19mm, 2000mm, 200mm, 2100mm, 219mm, 2200mm, 250mm, 25mm, 300mm, 30mm, 32mm, 3500mm, 350mm, 38mm, 400mm, 42mm, 450mm, 480mm, 500mm, 510mm, 51mm, 550mm, 55mm, 600mm, 60mm, 63mm, 650mm, 66mm, 6mm, 700mm, 750mm, 76mm, 800mm, 80mm, 850mm, 89mm, 8mm, 900mm, 90mm, 950mm, 95mm4inch Aluminum Half Balls
102mm
Aluminum Half Sphere
1000mm, 102mm, 10mm, 1100mm, 114mm, 1200mm, 120mm, 127mm, 1300mm, 133mm, 138mm, 1400mm, 1500mm, 150mm, 159mm, 15mm, 1600mm, 1700mm, 1800mm, 180mm, 1900mm, 19mm, 2000mm, 200mm, 2100mm, 219mm, 2200mm, 2400mm, 2500mm, 250mm, 25mm, 2600mm, 2700mm, 2750mm, 2800mm, 3000, 3000mm, 300mm, 30mm, 32mm, 3500mm, 350mm, 38mm, 400mm, 42mm, 450mm, 480mm, 500mm, 510mm, 51mm, 550mm, 55mm, 600mm, 60mm, 63mm, 650mm, 66mm, 6mm, 700mm, 750mm, 76mm, 800mm, 80mm, 850mm, 89mm, 8mm, 900mm, 90mm, 950mm, 95mmLighting And Furniture FAQ
What aperture sizes come without a mould fee?
Is there a mould fee for a custom small size?
What are the minimums on small brass and aluminium balls?
Can you repeat the same finish next season?
Talk to Someone Who Has Built This Before
Send the drawing, the site and the deadline. We will tell you what is buildable and what ships.