VKX100100H Dual-Energy X-Ray Cargo Inspection System
The VKX100100H is sized for what a normal baggage scanner turns away: a 1005 x 1005 mm tunnel taking 250 kg evenly distributed, penetrating 38 mm or more of steel from a 160 kV adjustable tube. Sealed oil cooling with fan heat dissipation gives a 100% duty cycle, which is what a sorting centre running all shift actually needs.
Key benefits
- 1005 x 1005 mm tunnel with a 250 kg evenly distributed conveyor load
- 100% duty cycle from sealed oil cooling with industrial fan dissipation
- 38 mm or more steel penetration at 38 AWG wire resolution
- Leakage under 0.5 microgray per hour at 5 cm from the shell
- Modular architecture improves interference resistance and serviceability
Problems it solves
- Standard tunnels reject oversized suitcases and large parcels
- Duty-cycle limits force a scanner to rest during a busy shift
- Dense freight defeats scanners with lower steel penetration
- Field servicing is slow on non-modular internal layouts
Who it is for
- Logistics operators screening oversized luggage and parcels
- Customs authorities inspecting medium-to-large shipments
- Sites running continuous shifts that defeat a limited duty cycle
Application scenarios
- Customs and border logistics inspection
- Cargo inspection stations and freight terminals
- Bus terminals and highway checkpoints
- Express sorting centres and warehouses
Technical features
- ASIC-based full-digital image acquisition
- RTOS real-time processing with TIP support and assisted alerts
- Remote management and rapid image backup
- One-key start and stop, infrared energy-saving sensing and self-diagnosis
- Dual-layer lead curtains at tunnel entrance and exit plus body lead shielding
Specifications
| Tunnel Size | 1005 x 1005 mm |
|---|---|
| Conveyor Speed | 0.22 m/s |
| Maximum Load | 250 kg evenly distributed |
| Penetration | 38 mm steel plate or more |
| Wire Resolution | 38 AWG or better |
| Spatial Resolution | horizontal and vertical 1.0 mm |
| Conveyor Height | 705 mm |
| Tube Voltage | 160 kV adjustable |
| Tube Current | 0.6 to 1.2 mA adjustable |
| Cooling and Duty Cycle | Sealed oil cooling with fan dissipation, 100% duty cycle |
| Leakage Dose Rate | under 0.5 microgray/h at 5 cm from the shell |
| Single Dose | under 5.0 microgray |
| Net Weight | 1200 kg |
| Maximum Power Consumption | 0.8 kW |
| Power Supply | AC 220 V plus or minus 10%, 60 Hz plus or minus 5% |
| Noise Level | under 58 dB(A) |
Figures are those published by the factory for this model. Where a value is shown as TBC it is not published, and we will confirm it with the factory before you order rather than estimate it.
Customisation options
- Customised inspection keyboard on the operator platform
Compared with other models in the range
The VKJ-150180D goes far larger at 1510 x 1810 mm with dual-view imaging for palletised freight. The VKX100100H is the single-view system for suitcases, oversized luggage and medium-to-large parcels, at 1200 kg and 0.8 kW rather than a dual-source installation.
Use guide
- Confirm the 705 mm conveyor height matches the feed and take-off tables
- Keep loads within 250 kg and evenly distributed across the belt
- Adjust tube current between 0.6 and 1.2 mA for the freight density
- Verify local radiation compliance for the installation before commissioning
- Use self-diagnosis and remote management to shorten service visits
Where this product is used
Part of X-Ray Baggage and Cargo Scanners ยท typically specified for:
VKX100100H Dual-Energy X-Ray Cargo Inspection System FAQ
What size and weight can it take
A 1005 x 1005 mm tunnel with up to 250 kg evenly distributed on the conveyor.
Can it run continuously
Yes, sealed oil cooling with industrial fan dissipation gives a 100% duty cycle.
How much steel will it penetrate
38 mm steel plate or more, at 38 AWG wire resolution.
What is the radiation leakage
Under 0.5 microgray per hour measured 5 cm from the shell, with single dose under 5.0 microgray.
Is it compliant for our country
Lead shielding and dual-layer curtains support compliant protection, but final compliance must be confirmed against local regulations. Send us the destination on WhatsApp.
How noisy is it
Under 58 dB(A).
What are the power requirements
AC 220 V plus or minus 10% at 60 Hz plus or minus 5%, drawing at most 0.8 kW.
Related products
VKJ-BK7555 Backscatter X-Ray Inspection System for Large Baggage
View specification →
VKJ-BK6040E Backscatter and Dual-Energy X-Ray Inspection System
View specification →
VKJ-150180D Dual-View Ultra-Large Cargo X-Ray Inspection System
View specification →
VKJ-150180 Ultra-Large Cargo X-Ray Inspection System
View specification →Quotation for the VKX100100H Dual-Energy X-Ray Cargo Inspection System
Send your destination port and quantity. We will come back with price, lead time and what documentation the factory can supply for your market.