Dongguan Viboo · Dongguan, China
Averguard logo Request A Quote
8 models

Metal Detector Pinpointers

Probes that find the exact position of a target in a dug hole, where a full-size coil is useless.

Metal Detector Pinpointers

What this category solves

  • A search coil cannot locate a target once the hole is open
  • Motion-required detectors give nothing at close range
  • Digging a wide hole to find a small target damages the site
  • Audio-only alerting is lost near running water or in wind
  • Non-waterproof probes cannot be used in wet ground at all

Who it is for

  • Detectorists recovering targets after a general search
  • Divers and beach searchers working wet ground
  • Security and quality inspectors needing a close-range probe
  • Jewellery plants checking for precious metal loss

What the range gives you

  • IP68 models rated to 8 m and 30 m depth
  • Detection accuracy published down to a 2 mm needle on the HS-11
  • Three-stage LED proximity indication on the GC-2005
  • Static operation on the VD2003, no motion required to detect
  • Built-in LED flashlights and vibration alerting across the range

Typical scenarios

  • Pinpointing a coin or ring in loose soil after digging
  • Underwater and shoreline recovery to 30 m
  • Working a hole in poor light with the built-in torch
  • Security screening at close range in a plant or venue

Metal Detector Pinpointers FAQ

Which pinpointer goes deepest underwater

The HS-11 and HS-12 are IP68 to 30 m. The HS-08 is rated to 8 m and the GC-2005 is not waterproof at all.

How small a target can a pinpointer resolve

The HS-11 states a 2 mm small needle. Coin sensitivity ranges from 3.5 cm to 9 cm across the range.

Do I still need a main detector

Yes. A pinpointer is used alongside one, to locate the target once the general area has been found.

Which one shows how close I am

The GC-2005, which lights a first, second and third LED as the probe approaches.

Do they include batteries

Most take a 9 V cell which is not supplied. The GP-Pinpoint includes a rechargeable battery.

Can one work with my existing detector

The GP-Pinpoint has a 1/4 inch male plug that fits most detectors. Send us your model to confirm.

Specifying metal detector pinpointers

Tell us the dimensions, the throughput and the environment. We will recommend the model that fits rather than the one at the top of the range.