

Three 30 ton crane builds published against one reference table so a buyer can read capacity, span, hook height and speed side by side before choosing. The light overhead build covers 5 to 100 Tons of lifting load at 0.4-16m/min, the winch overhead build extends to 5 to 360 Tons at 0.4-20m/min, and a gantry version handles up to 320 Tons over spans reaching 50M for subway construction, outdoor warehouses and railroads.
One reference table gives load span height and speed for all three builds so a specification can be closed in a single review
Light and winch builds share the 0-49M span envelope which lets a plant upgrade duty without altering runway geometry
Lifting heights of 30M/40M reach the top of deep pits and tall storage stacks that a shorter hook path leaves unusable
Wireless cab and handheld control options let the driver stand where the load is actually landed
The gantry build removes the need for a supporting building where lifting happens in an open yard or railroad siding
Quotations that omit speed and span figures cannot be compared on equal terms
A building with no suitable roof structure cannot carry a conventional overhead runway
Fixed pendant control forces an operator to walk a poor sight line to the landing point
A hook path that stops short of the stack height wastes vertical storage space
| Rated Capacity | 30 Ton |
|---|---|
| Light Overhead Lifting Load | 5 to 100 Tons |
| Winch Overhead Lifting Load | 5 to 360 Tons |
| Max Span Overhead Builds | 0-49M |
| Max Lifting Height | 30M/40M |
| Lifting Speed | 0.4-16m/min light and 0.4-20m/min winch |
| Gantry Build | Up to 320 Tons span up to 50M height up to 40M |
| Control Options | Wireless cab handheld |
Figures shown are taken from the supplying factory documentation. Anything not listed here is confirmed in writing before order.
Matched to construction hoisting and light industrial duty at 0.4-16m/min
Extends load range to 360 Tons and lifts at 0.4-20m/min for large hoisting
Carries its own legs so it works in outdoor warehouses railroads and subway sites




40 Ton Overhead Crane
A 40 ton crane family covering overhead, winch and gantry builds for construction, outdoor warehouse and railr...
View Details →
50 Ton Overhead Crane
A 50 ton bridge crane offered in light double beam and winch double beam builds, both produced in Henan, China...
View Details →
100 Ton Overhead Crane
A 100 ton overhead crane range written for heavy manufacturing, shipbuilding, aerospace, metals and mining, po...
View Details →
150 Ton Crane Solution
A winch type 150 ton crane built on a double beam bridge design with a European style electric wire rope hoist...
View Details →
Ceiling Crane for a Metro Vehicle Inspection and Repair Depot
Vehicle maintenance has to happen above and around a train that occupies most of the bay, ...
Read Case →
Crane for Casting Pipe Handling in a Foundry
Casting pipe has to be moved through a foundry environment that punishes equipment, and th...
Read Case →The light build covers 5 to 100 Tons at 0.4-16m/min for construction hoisting. The winch build covers 5 to 360 Tons at 0.4-20m/min for heavy duty construction and large hoisting.
Yes. The gantry build stands on its own legs, spans up to 50M and is used at outdoor warehouses railroads and subway construction sites.
Wireless remote, cab and handheld control are offered, and the choice is normally made from where the driver can best see the load land.
Maximum lifting height is offered at 30M or 40M and the figure is fixed against your building or yard before production.
Packing is arranged for the destination and transport mode and the details are confirmed with the quotation.
Delivery follows the build span and control selection and is confirmed in writing with the quotation rather than promised in advance.
Send the drawing, capacity or duty cycle you need and we will come back with the factory match, the build detail and the commercial terms.
Email Our Sourcing TeamView Category