LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
UTP Cat5e White — CAT5e manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT5e Cable

UTP Cat5e White

1000ft CAT5e UTP Cable UTP Ethernet LAN Cable 24AWG Network Wire Solid Copper 4pr

UTP Cat5e White sits in the LANP CAT5e Cable range as a 4 pair UTP CAT5e solid bare copper build. The factory specification for this line reads: 1000ft CAT5e UTP Cable UTP Ethernet LAN Cable 24AWG Network Wire Solid Copper 4pr.

It is supplied in White, packed as 1000 ft. MOQ runs from 100 m for a trial reel up to production runs of 50,000 m, with bulk production typically 3-7 days from PO confirmation.

CategoryCAT5e Cable
ShieldingUTP
Conductorbare copper
Gauge24 AWG
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Bare Copper Conductor

UTP Cat5e White uses a bare copper conductor, so loop resistance stays where the cat5e cable specification says it should be instead of climbing with run length.

Unshielded Build

UTP Cat5e White is an unshielded build, which means a smaller outside diameter and faster termination than a screened equivalent — the right trade in a conventional building.

24 AWG Conductor

Conductor size on UTP Cat5e White is 24 AWG, and it is verified by resistance measurement on every batch rather than taken from the extruder setting.

4 Pair Build

With 4 pair, UTP Cat5e White leaves room for the device that gets added after handover — which is the normal case, not the exception.

OEM Branding Available

Your brand can be extruded onto the UTP Cat5e White jacket from 1 km per specification, alongside the rating and length markers, with box artwork and reel labels to match.

Tested Before It Ships

Testing on UTP Cat5e White happens at the factory, not at your warehouse: continuity end to end, conductor resistance, and dielectric strength on the finished cable.

Technical Data

Specification Sheet

Values below are the factory specification for UTP Cat5e White. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameUTP Cat5e White
CategoryCAT5e Cable
Cable ClassCAT5e
ShieldingUTP — unshielded twisted pair
Conductor Materialbare copper
Conductor StructureSolid
Conductor Gauge24 AWG
Pairs4 pair
Jacket ColourWhite
Packaging1000 ft
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT5e specification
  • UTP — unshielded twisted pair
  • Solid conductor
  • Jacket printed with specification and rating as standard

Materials

  • Conductor: bare copper

Who It Is For

  • Contractors fitting out offices, schools and retail units
  • CCTV and access control installers running PoE drops
  • Wholesalers stocking a single high-turnover bulk line
  • Housebuilders wiring structured cabling into new homes

Problems It Solves

  • PoE devices dropping out at the far end of long horizontal runs
  • CCA supplied against a bare copper line item
  • Jacket print that rubs off before the installer records the drum number
  • Pull boxes that tangle halfway through a ceiling run

Application Scenarios

  • Horizontal drops to desks, access points and IP phones
  • PoE camera runs in car parks and corridors
  • Temporary event and site networks that get re-pulled often
  • Structured cabling in residential developments
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester

Certification

  • HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
FTP Cat5e BlueSame family, different screening: this one is UTP where that one is FTP. Screening changes outside diameter, bend radius and the hardware the link has to terminate into.
FTP Cat5e GraySame family, different screening: this one is UTP where that one is FTP. Screening changes outside diameter, bend radius and the hardware the link has to terminate into.
Use Guide

Installing It Without Losing Performance

  • Do not force UTP Cat5e White through a route. Stretching the conductors changes the twist geometry permanently, and the damage is invisible until the tester finds it.
  • Keep untwist length to the minimum the connector allows when terminating UTP Cat5e White — it is the most common reason a field-terminated link fails while a factory cord on the same run passes.
  • Respect the bend radius on UTP Cat5e White, especially in the last stretch into the patch panel where a full bundle is being dressed into a tight space.

Before a first bulk order of UTP Cat5e White: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT5e Cable Range

See all 15 cat5e cable products →

CAT5eFTP Cat5e Blue — CAT5e manufactured by LANP CABLE

FTP Cat5e Blue

Cat5e Bulk STP FTP Ethernet Lan Cable 4Pr 24AWG Bare Copper Indoor for POE DATA Networking

FTP24 AWGBlue
View specification →
CAT5eFTP Cat5e Gray — CAT5e manufactured by LANP CABLE

FTP Cat5e Gray

CAT5E Category Cable FTP Twisted Pairs 1000FT Solid Data Networking Cable Ethernet CAT5 Bulk…

FTPGrey
View specification →
CAT5eFTP Cat5e Grey — CAT5e manufactured by LANP CABLE

FTP Cat5e Grey

305m Ethernet Copper Cable Roll Network LAN Solid FTP Cat5e Shielded 1000ft Data Networking Lead

FTPGrey
View specification →
CAT5eFTP Cat5e LSZH — CAT5e manufactured by LANP CABLE

FTP Cat5e LSZH

Cable 1000Ft 305M Cat5e Ethernet Wire 24AWG Copper FTP Twisted Pair Networking Lan Bulk…

FTP24 AWGGreen
View specification →

Related guides

Where it is installed

Questions

UTP Cat5e White — Questions

Is the conductor in UTP Cat5e White really bare copper?

Yes. UTP Cat5e White is a bare copper line, confirmed by resistance measurement on each production lot rather than by the extruder setting.

How is UTP Cat5e White packed?

Standard packing for UTP Cat5e White is 1000 ft; reel or coil length can change on a production run if your installers want a different unit.

Can UTP Cat5e White be supplied in another jacket colour?

Yes, on a production run. White is the stocked colour for UTP Cat5e White, and a different code can be extruded if the destination market requires it.

What is the minimum order and lead time for UTP Cat5e White?

UTP Cat5e White starts at 100 m for a sample reel and runs to 50,000 m per production order. Bulk production is typically 3-7 days from PO confirmation.

Is UTP Cat5e White covered by a compliance certificate?

UTP Cat5e White falls under the HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable.

Request pricing on UTP Cat5e White

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue