LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
UTP Cat5e Yellow — CAT5e manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT5e Cable

UTP Cat5e Yellow

CAT5e Yellow Cable 4/UTP Ethernet LAN Cable 24AWG Network Wire Solid Copper

UTP Cat5e Yellow is built as a UTP CAT5e solid bare copper cable within the LANP CAT5e Cable range. The original specification reads: CAT5e Yellow Cable 4/UTP Ethernet LAN Cable 24AWG Network Wire Solid Copper.

It is supplied in Yellow. MOQ runs from 100 m for a trial reel up to production runs of 50,000 m, with bulk production typically 3-7 days from PO confirmation.

CategoryCAT5e Cable
ShieldingUTP
Conductorbare copper
Gauge24 AWG
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Bare Copper Conductor

Copper all the way through on UTP Cat5e Yellow. Resistance per metre is measured on every batch rather than assumed from the conductor diameter.

Unshielded Build

UTP Cat5e Yellow is an unshielded build, which means a smaller outside diameter and faster termination than a screened equivalent — the right trade in a conventional building.

24 AWG Conductor

UTP Cat5e Yellow runs a 24 AWG conductor. Gauge is the figure that decides PoE reach and heat rise in a full bundle, so it is measured, not assumed.

Yellow Jacket

The yellow jacket on UTP Cat5e Yellow is an identification decision as much as a cosmetic one — it is what tells the next contractor what they are looking at.

OEM Branding Available

OEM on UTP Cat5e Yellow means print on the cable itself from 1 km — still readable when an electrician pulls the last ten metres off the drum.

Tested Before It Ships

UTP Cat5e Yellow does not leave the floor untested. Resistance, continuity and dielectric checks run on each production lot, and the records stay with the batch.

Technical Data

Specification Sheet

Values below are the factory specification for UTP Cat5e Yellow. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameUTP Cat5e Yellow
CategoryCAT5e Cable
Cable ClassCAT5e
ShieldingUTP — unshielded twisted pair
Conductor Materialbare copper
Conductor StructureSolid
Conductor Gauge24 AWG
Jacket ColourYellow
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT5e specification
  • UTP — unshielded twisted pair
  • Solid conductor
  • Jacket printed with specification and rating as standard

Materials

  • Conductor: bare copper

Who It Is For

  • Contractors fitting out offices, schools and retail units
  • CCTV and access control installers running PoE drops
  • Wholesalers stocking a single high-turnover bulk line
  • Housebuilders wiring structured cabling into new homes

Problems It Solves

  • PoE devices dropping out at the far end of long horizontal runs
  • CCA supplied against a bare copper line item
  • Jacket print that rubs off before the installer records the drum number
  • Pull boxes that tangle halfway through a ceiling run

Application Scenarios

  • Horizontal drops to desks, access points and IP phones
  • PoE camera runs in car parks and corridors
  • Temporary event and site networks that get re-pulled often
  • Structured cabling in residential developments
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester

Certification

  • HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
FTP Cat5e BlueSame family, different screening: this one is UTP where that one is FTP. Screening changes outside diameter, bend radius and the hardware the link has to terminate into.
FTP Cat5e GraySame family, different screening: this one is UTP where that one is FTP. Screening changes outside diameter, bend radius and the hardware the link has to terminate into.
Use Guide

Installing It Without Losing Performance

  • Pull UTP Cat5e Yellow at a steady, low tension. Pair geometry stretched during installation cannot be recovered, and it shows up as a return loss failure at certification.
  • Every millimetre of untwisted conductor at a UTP Cat5e Yellow termination is unprotected cable. Strip back only as far as the contact block actually needs.
  • Keep UTP Cat5e Yellow off sharp edges and out of tight bends. Impedance changes at a deformed bend do not average out over the link.

Before a first bulk order of UTP Cat5e Yellow: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT5e Cable Range

See all 15 cat5e cable products →

CAT5eFTP Cat5e Blue — CAT5e manufactured by LANP CABLE

FTP Cat5e Blue

Cat5e Bulk STP FTP Ethernet Lan Cable 4Pr 24AWG Bare Copper Indoor for POE DATA Networking

FTP24 AWGBlue
View specification →
CAT5eFTP Cat5e Gray — CAT5e manufactured by LANP CABLE

FTP Cat5e Gray

CAT5E Category Cable FTP Twisted Pairs 1000FT Solid Data Networking Cable Ethernet CAT5 Bulk…

FTPGrey
View specification →
CAT5eFTP Cat5e Grey — CAT5e manufactured by LANP CABLE

FTP Cat5e Grey

305m Ethernet Copper Cable Roll Network LAN Solid FTP Cat5e Shielded 1000ft Data Networking Lead

FTPGrey
View specification →
CAT5eFTP Cat5e LSZH — CAT5e manufactured by LANP CABLE

FTP Cat5e LSZH

Cable 1000Ft 305M Cat5e Ethernet Wire 24AWG Copper FTP Twisted Pair Networking Lan Bulk…

FTP24 AWGGreen
View specification →

Related guides

Where it is installed

Questions

UTP Cat5e Yellow — Questions

Is the conductor in UTP Cat5e Yellow really bare copper?

It is. UTP Cat5e Yellow is specified as bare copper and the batch resistance record is available with the shipment if you want to check it.

What packing formats are available for UTP Cat5e Yellow?

Packing for UTP Cat5e Yellow is decided with the order — reels, coils or cartons, in whatever unit length suits the installers.

Can UTP Cat5e Yellow be supplied in another jacket colour?

The stocked jacket on UTP Cat5e Yellow is yellow. If your market uses a different identification code, set it with the order alongside the print text.

What is the minimum order and lead time for UTP Cat5e Yellow?

UTP Cat5e Yellow is available from a 100 m sample reel through to 50,000 m production runs, with typical bulk lead times of 3-7 days.

Is UTP Cat5e Yellow covered by a compliance certificate?

UTP Cat5e Yellow falls under the HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable.

Request pricing on UTP Cat5e Yellow

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue